The sdhci platform helper function that sets up the default controller
configuration is removed for all Samsung platforms since such default
controller configuration can be handled by the driver.
Cc: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
arch/arm/mach-exynos4/setup-sdhci.c | 47 -----------------------
arch/arm/mach-s3c2416/setup-sdhci.c | 37 ------------------
arch/arm/mach-s3c64xx/setup-sdhci.c | 48 -----------------------
arch/arm/mach-s5pc100/setup-sdhci.c | 42 --------------------
arch/arm/mach-s5pv210/setup-sdhci.c | 41 --------------------
arch/arm/plat-samsung/dev-hsmmc.c | 2 -
arch/arm/plat-samsung/dev-hsmmc1.c | 2 -
arch/arm/plat-samsung/dev-hsmmc2.c | 2 -
arch/arm/plat-samsung/dev-hsmmc3.c | 2 -
arch/arm/plat-samsung/include/plat/sdhci.h | 57 ----------------------------
10 files changed, 0 insertions(+), 280 deletions(-)
diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c
index 1e83f8c..92937b4 100644
--- a/arch/arm/mach-exynos4/setup-sdhci.c
+++ b/arch/arm/mach-exynos4/setup-sdhci.c
@@ -10,16 +10,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = {
[2] = "sclk_mmc", /* mmc_bus */
[3] = NULL,
};
-
-void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r,
- struct mmc_ios *ios, struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
-
- /* select base clock source to HCLK */
-
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
-
- /*
- * clear async mode, enable conflict mask, rx feedback ctrl, SD
- * clk hold and no use debounce count
- */
-
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- /* Tx and Rx feedback clock delay control */
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
index ed34fad..cee5395 100644
--- a/arch/arm/mach-s3c2416/setup-sdhci.c
+++ b/arch/arm/mach-s3c2416/setup-sdhci.c
@@ -12,17 +12,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = {
[2] = "hsmmc-if",
/* [3] = "48m", - note not successfully used yet */
};
-
-void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
index f344a22..c75a71b 100644
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ b/arch/arm/mach-s3c64xx/setup-sdhci.c
@@ -12,17 +12,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = {
[2] = "mmc_bus",
/* [3] = "48m", - note not successfully used yet */
};
-
-void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
-
-void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- s3c6400_setup_sdhci_cfg_card(dev, r, ios, card);
-}
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
index be25879..6418c6e 100644
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -11,17 +11,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = {
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = "48m", - note not successfully used yet */
};
-
-
-void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
index a83b6c9..6b8ccc4 100644
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ b/arch/arm/mach-s5pv210/setup-sdhci.c
@@ -10,17 +10,7 @@
* published by the Free Software Foundation.
*/
-#include <linux/kernel.h>
#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/mmc/card.h>
-#include <linux/mmc/host.h>
-
-#include <plat/regs-sdhci.h>
-#include <plat/sdhci.h>
/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
@@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = {
[2] = "sclk_mmc", /* mmc_bus */
/* [3] = NULL, - reserved */
};
-
-void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card)
-{
- u32 ctrl2, ctrl3;
-
- /* don't need to alter anything according to card-type */
-
- writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
-
- ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
- ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
- ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
- S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
- S3C_SDHCI_CTRL2_ENFBCLKRX |
- S3C_SDHCI_CTRL2_DFCNT_NONE |
- S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
-
- if (ios->clock < 25 * 1000000)
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
- S3C_SDHCI_CTRL3_FCSEL2 |
- S3C_SDHCI_CTRL3_FCSEL1 |
- S3C_SDHCI_CTRL3_FCSEL0);
- else
- ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
-
- writel(ctrl2, r + S3C_SDHCI_CONTROL2);
- writel(ctrl3, r + S3C_SDHCI_CONTROL3);
-}
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index db7a65c..5f15bf7 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -70,8 +70,6 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
if (pd->host_caps)
set->host_caps |= pd->host_caps;
if (pd->clk_type)
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index 2497321..2249794 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -70,8 +70,6 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
if (pd->host_caps)
set->host_caps |= pd->host_caps;
if (pd->clk_type)
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index f60aedb..58af1eb 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -71,8 +71,6 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
if (pd->host_caps)
set->host_caps |= pd->host_caps;
if (pd->clk_type)
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index ede776f..bb44271 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -74,8 +74,6 @@ void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
- if (pd->cfg_card)
- set->cfg_card = pd->cfg_card;
if (pd->host_caps)
set->host_caps |= pd->host_caps;
if (pd->clk_type)
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 058e096..7f57173 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -55,10 +55,6 @@ enum clk_types {
* cd_type == S3C_SDHCI_CD_GPIO
* @ext_cd_gpio_invert: invert values for external CD gpio line
* @cfg_gpio: Configure the GPIO for a specific card bit-width
- * @cfg_card: Configure the interface for a specific card and speed. This
- * is necessary the controllers and/or GPIO blocks require the
- * changing of driver-strength and other controls dependent on
- * the card and speed of operation.
*
* Initialisation data specific to either the machine or the platform
* for the device driver to use or call-back when configuring gpio or
@@ -80,10 +76,6 @@ struct s3c_sdhci_platdata {
int state));
void (*cfg_gpio)(struct platform_device *dev, int width);
- void (*cfg_card)(struct platform_device *dev,
- void __iomem *regbase,
- struct mmc_ios *ios,
- struct mmc_card *card);
};
/**
@@ -132,17 +124,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
#ifdef CONFIG_S3C2416_SETUP_SDHCI
extern char *s3c2416_hsmmc_clksrcs[4];
-extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s3c2416_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
#endif /* CONFIG_S3C_DEV_HSMMC */
}
@@ -151,7 +137,6 @@ static inline void s3c2416_default_sdhci1(void)
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card;
#endif /* CONFIG_S3C_DEV_HSMMC1 */
}
@@ -165,17 +150,11 @@ static inline void s3c2416_default_sdhci1(void) { }
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
extern char *s3c64xx_hsmmc_clksrcs[4];
-extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s3c6400_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
@@ -184,7 +163,6 @@ static inline void s3c6400_default_sdhci1(void)
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
@@ -193,21 +171,14 @@ static inline void s3c6400_default_sdhci2(void)
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
#endif
}
-extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s3c6410_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
@@ -216,7 +187,6 @@ static inline void s3c6410_default_sdhci1(void)
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
@@ -225,7 +195,6 @@ static inline void s3c6410_default_sdhci2(void)
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card;
#endif
}
@@ -244,17 +213,11 @@ static inline void s3c6400_default_sdhci2(void) { }
#ifdef CONFIG_S5PC100_SETUP_SDHCI
extern char *s5pc100_hsmmc_clksrcs[4];
-extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s5pc100_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
@@ -263,7 +226,6 @@ static inline void s5pc100_default_sdhci1(void)
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
@@ -272,7 +234,6 @@ static inline void s5pc100_default_sdhci2(void)
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
#endif
}
@@ -288,17 +249,11 @@ static inline void s5pc100_default_sdhci2(void) { }
#ifdef CONFIG_S5PV210_SETUP_SDHCI
extern char *s5pv210_hsmmc_clksrcs[4];
-extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void s5pv210_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
@@ -307,7 +262,6 @@ static inline void s5pv210_default_sdhci1(void)
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
@@ -316,7 +270,6 @@ static inline void s5pv210_default_sdhci2(void)
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
@@ -325,7 +278,6 @@ static inline void s5pv210_default_sdhci3(void)
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
- s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card;
#endif
}
@@ -341,17 +293,11 @@ static inline void s5pv210_default_sdhci3(void) { }
#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
extern char *exynos4_hsmmc_clksrcs[4];
-extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev,
- void __iomem *r,
- struct mmc_ios *ios,
- struct mmc_card *card);
-
static inline void exynos4_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
- s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
@@ -360,7 +306,6 @@ static inline void exynos4_default_sdhci1(void)
#ifdef CONFIG_S3C_DEV_HSMMC1
s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
- s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
@@ -369,7 +314,6 @@ static inline void exynos4_default_sdhci2(void)
#ifdef CONFIG_S3C_DEV_HSMMC2
s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
- s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
@@ -378,7 +322,6 @@ static inline void exynos4_default_sdhci3(void)
#ifdef CONFIG_S3C_DEV_HSMMC3
s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
- s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card;
#endif
}
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
