Hi Girish.
I agreed for Mr.Jeon's opinion.
I think that need not to check for any exception case.
(Mr.Jeon mentioned the below comment, just using default cmd6_timeout)
Thanks,
Jaehoon Chung
Girish K S wrote:
> Hello Mr Jeon,
> In case if the timeout is specified by the
> calling function, the code in this patch will not be executed. But if
> some command other than the three are called with 0, then this code
> will make sure that atleast the default value is used to timeout.
>
> regards
> Girish K S
>
> On 1 September 2011 11:50, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
>> Hi Girish,
>>
>> Girish K S wrote:
>>> V2- The datatype of the cmd6_timeout is changed from u8 to unsigned int,
>>> as it can hold a value upto 255*10=2550.
>>> This patch adds the code to handle the default timeout
>>> for switch command.
>>> For eMMC 4.5 devices if timeout is not specified for the switch
>>> command while accessing a specific field,then the default timeout
>>> shall be used to timeout. Specification says there is no timeout
>>> defined while accessing BKOPS_START, SANITIZE_START, FLUSH_CACHE
>>> field(so these fields are excluded).
>>>
>>> Signed-off-by: Girish K S <girish.shivananjappa@xxxxxxxxxx>
>>> ---
>>> drivers/mmc/core/mmc.c | 5 +++++
>>> drivers/mmc/core/mmc_ops.c | 8 ++++++++
>>> include/linux/mmc/card.h | 1 +
>>> include/linux/mmc/mmc.h | 4 ++++
>>> 4 files changed, 18 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>>> index 5700b1c..5b9fb6a 100644
>>> --- a/drivers/mmc/core/mmc.c
>>> +++ b/drivers/mmc/core/mmc.c
>>> @@ -405,6 +405,11 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8
>>> *ext_csd)
>>> if (card->ext_csd.rev >= 5)
>>> card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
>>>
>>> + if (card->ext_csd.rev > 5) {
>>> + /* (eMMC 4.5)timeout is expressed in units of 10 ms*/
>>> + card->ext_csd.cmd6_timeout = ext_csd[EXT_CSD_CMD6_TIME]*10;
>>> + }
>>> +
>>> if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
>>> card->erased_byte = 0xFF;
>>> else
>>> diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
>>> index 770c3d0..c4d82f4 100644
>>> --- a/drivers/mmc/core/mmc_ops.c
>>> +++ b/drivers/mmc/core/mmc_ops.c
>>> @@ -394,6 +394,14 @@ int mmc_switch(struct mmc_card *card, u8 set, u8
>>> index, u8 value,
>>> cmd.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
>>> cmd.cmd_timeout_ms = timeout_ms;
>>>
>>> + /* timeout is not defined for below command indexes (eMMC 4.5) */
>>> + if ((timeout_ms == 0) &&
>>> + (card->ext_csd->rev > 5) &&
>>> + (index != EXT_CSD_BKOPS_START) &&
>>> + (index != EXT_CSD_SANITIZE_START) &&
>>> + (index != EXT_CSD_FLUSH_CACHE))
>>> + cmd.cmd_timeout_ms = card->ext_csd->cmd6_timeout;
>>> +
>> mmc_switch doesn't need to take over '0' value for timeout_ms except for undefined timeout(Background operation, sanitize, etc)
>> It is possible and good to pass the argument of specific timeout_ms(including default cmd6 timeout) explicitly rather than '0',
>> if timeout value for cmd6 is defined.
>> Then, mmc_switch maybe doesn't need to handle timeout for some exception case.
>>
>>> err = mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
>>> if (err)
>>> return err;
>>> diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
>>> index b460fc2..ef88412 100644
>>> --- a/include/linux/mmc/card.h
>>> +++ b/include/linux/mmc/card.h
>>> @@ -50,6 +50,7 @@ struct mmc_ext_csd {
>>> u8 rel_sectors;
>>> u8 rel_param;
>>> u8 part_config;
>>> + unsigned int cmd6_timeout; /* timeout in ms */
>>> unsigned int part_time; /* Units: ms */
>>> unsigned int sa_timeout; /* Units: 100ns */
>>> unsigned int hs_max_dtr;
>>> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
>>> index 5a794cb..a23f836 100644
>>> --- a/include/linux/mmc/mmc.h
>>> +++ b/include/linux/mmc/mmc.h
>>> @@ -270,8 +270,11 @@ struct _mmc_csd {
>>> * EXT_CSD fields
>>> */
>>>
>>> +#define EXT_CSD_FLUSH_CACHE 32 /* R/W */
>>> #define EXT_CSD_PARTITION_ATTRIBUTE 156 /* R/W */
>>> #define EXT_CSD_PARTITION_SUPPORT 160 /* RO */
>>> +#define EXT_CSD_BKOPS_START 164 /* R/W */
>>> +#define EXT_CSD_SANITIZE_START 165 /* R/W */
>>> #define EXT_CSD_WR_REL_PARAM 166 /* RO */
>>> #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
>>> #define EXT_CSD_PART_CONFIG 179 /* R/W */
>>> @@ -293,6 +296,7 @@ struct _mmc_csd {
>>> #define EXT_CSD_SEC_ERASE_MULT 230 /* RO */
>>> #define EXT_CSD_SEC_FEATURE_SUPPORT 231 /* RO */
>>> #define EXT_CSD_TRIM_MULT 232 /* RO */
>>> +#define EXT_CSD_CMD6_TIME 248 /* RO */
>>>
>>> /*
>>> * EXT_CSD field definitions
>>> --
>>> 1.7.1
>>>
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
