Sachin Kamat wrote:
>
> From: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
>
> This patch modifies USB PHY initialization code so that USB host
> and device can be initialized with the same function.
>
> Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
> Signed-off-by: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
> ---
> arch/arm/mach-exynos4/include/mach/regs-pmu.h | 2 +-
> arch/arm/mach-exynos4/setup-usb-phy.c | 159 ++++++++++++++++---
> -----
> 2 files changed, 107 insertions(+), 54 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
b/arch/arm/mach-
> exynos4/include/mach/regs-pmu.h
> index cdf9b47..c4709f2 100644
> --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h
> +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h
> @@ -34,7 +34,7 @@
> #define S5P_WAKEUP_STAT
> S5P_PMUREG(0x0600)
> #define S5P_EINT_WAKEUP_MASK
> S5P_PMUREG(0x0604)
> #define S5P_WAKEUP_MASK
> S5P_PMUREG(0x0608)
> -
> +#define S5P_USBDEVICE_PHY_CONTROL
> S5P_PMUREG(0x0704)
> #define S5P_USBHOST_PHY_CONTROL
> S5P_PMUREG(0x0708)
> #define S5P_USBHOST_PHY_ENABLE (1 << 0)
>
> diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-
> exynos4/setup-usb-phy.c
> index f4c944a..69878a1 100644
> --- a/arch/arm/mach-exynos4/setup-usb-phy.c
> +++ b/arch/arm/mach-exynos4/setup-usb-phy.c
> @@ -21,51 +21,65 @@
>
> int s5p_usb_phy_init(struct platform_device *pdev, int type)
> {
> + struct clk *otg_clk, *usbhost_clk;
> + struct clk *xusbxti_clk;
> + u32 phyclk;
> + u32 rstcon;
> + int err;
> + if ((type != S5P_USB_PHY_HOST) && (type != S5P_USB_PHY_DEVICE))
> + return -EINVAL;
> +
> + otg_clk = clk_get(&pdev->dev, "otg");
> + if (IS_ERR(otg_clk)) {
> + dev_err(&pdev->dev, "Failed to get otg clock\n");
> + return PTR_ERR(otg_clk);
> + }
> +
> + err = clk_enable(otg_clk);
> + if (err) {
> + clk_put(otg_clk);
> + return err;
> + }
> +
> + /* set clock frequency for PLL */
> + phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
> +
> + xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
> + if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
> + switch (clk_get_rate(xusbxti_clk)) {
> + case 12 * MHZ:
> + phyclk |= CLKSEL_12M;
> + break;
> + case 24 * MHZ:
> + phyclk |= CLKSEL_24M;
> + break;
> + default:
> + case 48 * MHZ:
> + /* default reference clock */
> + break;
> + }
> + clk_put(xusbxti_clk);
> + }
> +
> + writel(phyclk, EXYNOS4_PHYCLK);
> +
> if (type == S5P_USB_PHY_HOST) {
> - struct clk *otg_clk;
> - struct clk *xusbxti_clk;
> - u32 phyclk;
> - u32 rstcon;
> - int err;
> -
> - otg_clk = clk_get(&pdev->dev, "otg");
> - if (IS_ERR(otg_clk)) {
> - dev_err(&pdev->dev, "Failed to get otg clock\n");
> - return PTR_ERR(otg_clk);
> + usbhost_clk = clk_get(&pdev->dev, "usbhost");
> +
> + if (IS_ERR(usbhost_clk)) {
> + dev_err(&pdev->dev, "Failed to get usbhost
clock\n");
> + return PTR_ERR(usbhost_clk);
(Cc'ed Yulgon Kim and Kyoungil Kim)
Hmm...I know, since the USB Host PHY Controller is included in the 'otg'
clock domain the 'otg' clock is controlled here. But the USB Host clock is
controlled in ehci-s5p driver now so we don't need to add this here.
> }
>
> - err = clk_enable(otg_clk);
> + err = clk_enable(usbhost_clk);
> if (err) {
> - clk_put(otg_clk);
> + clk_put(usbhost_clk);
> return err;
> }
>
> writel(readl(S5P_USBHOST_PHY_CONTROL) |
> S5P_USBHOST_PHY_ENABLE,
> S5P_USBHOST_PHY_CONTROL);
>
> - /* set clock frequency for PLL */
> - phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK;
> -
> - xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
> - if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
> - switch (clk_get_rate(xusbxti_clk)) {
> - case 12 * MHZ:
> - phyclk |= CLKSEL_12M;
> - break;
> - case 24 * MHZ:
> - phyclk |= CLKSEL_24M;
> - break;
> - default:
> - case 48 * MHZ:
> - /* default reference clock */
> - break;
> - }
> - clk_put(xusbxti_clk);
> - }
> -
> - writel(phyclk, EXYNOS4_PHYCLK);
> -
> - /* floating prevention logic: disable */
> writel((readl(EXYNOS4_PHY1CON) | FPENABLEN),
> EXYNOS4_PHY1CON);
>
> /* set to normal HSIC 0 and 1 of PHY1 */
> @@ -84,30 +98,61 @@ int s5p_usb_phy_init(struct platform_device *pdev,
int type)
>
> rstcon &= ~(HOST_LINK_PORT_SWRST_MASK |
> PHY1_SWRST_MASK);
> writel(rstcon, EXYNOS4_RSTCON);
> - udelay(80);
> + } else if (type == S5P_USB_PHY_DEVICE) {
> + writel(readl(S5P_USBDEVICE_PHY_CONTROL) | (0x1<<0),
> + S5P_USBDEVICE_PHY_CONTROL);
> + writel((readl(EXYNOS4_PHYPWR) & ~(0x7<<3)&~(0x1<<0)),
> + EXYNOS4_PHYPWR);
> + writel((readl(EXYNOS4_PHYCLK) & ~(0x5<<2))|(0x3<<0),
> + EXYNOS4_PHYCLK);
> + writel((readl(EXYNOS4_RSTCON) & ~(0x3<<1))|(0x1<<0),
> + EXYNOS4_RSTCON);
> + udelay(10);
> + writel(readl(EXYNOS4_RSTCON) & ~(0x7<<0),
> + EXYNOS4_RSTCON);
> + }
> + udelay(80);
>
> - clk_disable(otg_clk);
> - clk_put(otg_clk);
> + clk_disable(otg_clk);
> + clk_put(otg_clk);
> + if (type == S5P_USB_PHY_HOST)
> + clk_put(usbhost_clk);
>
> - return 0;
> - }
> - return -EINVAL;
> + return 0;
> }
>
> int s5p_usb_phy_exit(struct platform_device *pdev, int type)
> {
> + struct clk *otg_clk, *usbhost_clk;
> + int err;
> +
> + if ((type != S5P_USB_PHY_HOST) && (type != S5P_USB_PHY_DEVICE))
> + return -EINVAL;
> +
> + otg_clk = clk_get(&pdev->dev, "otg");
> + if (IS_ERR(otg_clk)) {
> + dev_err(&pdev->dev, "Failed to get otg clock\n");
> + return PTR_ERR(otg_clk);
> + }
> +
> + err = clk_enable(otg_clk);
> + if (err) {
> + clk_put(otg_clk);
> + return err;
> + }
> +
> if (type == S5P_USB_PHY_HOST) {
> - struct clk *otg_clk;
> - int err;
> - otg_clk = clk_get(&pdev->dev, "otg");
> - if (IS_ERR(otg_clk)) {
> - dev_err(&pdev->dev, "Failed to get otg clock\n");
> - return PTR_ERR(otg_clk);
> +
> + usbhost_clk = clk_get(&pdev->dev, "usbhost");
> +
> + if (IS_ERR(usbhost_clk)) {
> + dev_err(&pdev->dev, "Failed to get usbhost
clock\n");
> + return PTR_ERR(usbhost_clk);
> }
>
> - err = clk_enable(otg_clk);
> + err = clk_enable(usbhost_clk);
Wrong, do you _really_ want to enable usbhost_clk here, in usb_phy_exit()?
> if (err) {
> - clk_put(otg_clk);
> + clk_put(usbhost_clk);
> return err;
> }
>
> @@ -117,10 +162,18 @@ int s5p_usb_phy_exit(struct platform_device *pdev,
int
> type)
> writel(readl(S5P_USBHOST_PHY_CONTROL) &
> ~S5P_USBHOST_PHY_ENABLE,
> S5P_USBHOST_PHY_CONTROL);
>
> - clk_disable(otg_clk);
> - clk_put(otg_clk);
> + } else if (type == S5P_USB_PHY_DEVICE) {
> + writel(readl(EXYNOS4_PHYPWR) | (0x3<<3),
> + EXYNOS4_PHYPWR);
>
> - return 0;
> + writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~(1<<0),
> + S5P_USBDEVICE_PHY_CONTROL);
> }
> - return -EINVAL;
> +
> + clk_disable(otg_clk);
> + clk_put(otg_clk);
> + if (type == S5P_USB_PHY_HOST)
> + clk_put(usbhost_clk);
> +
> + return 0;
> }
> --
> 1.7.4.1
I can't agree this patch. I think you need to check about whole USB PHY
structure on EXYNOS4 again.
In addition, I don’t have idea we need to control USB Host clock for
handling USB PHY enable/disable.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
