This is required to work consolidation Samsung platform.
Cc: Ben Dooks <ben-linux@xxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
arch/arm/mach-s3c2410/include/mach/map.h | 52 +++++++++-
arch/arm/mach-s3c64xx/include/mach/map.h | 9 +--
arch/arm/plat-s3c24xx/include/plat/map.h | 100 --------------------
arch/arm/plat-samsung/include/plat/map-s3c.h | 84 ++++++++++++++++
.../include/plat/map-s5p.h | 6 +-
5 files changed, 134 insertions(+), 117 deletions(-)
delete mode 100644 arch/arm/plat-s3c24xx/include/plat/map.h
create mode 100644 arch/arm/plat-samsung/include/plat/map-s3c.h
rename arch/arm/{plat-s5p => plat-samsung}/include/plat/map-s5p.h (94%)
diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h
index 425552d..4cf495f 100644
--- a/arch/arm/mach-s3c2410/include/mach/map.h
+++ b/arch/arm/mach-s3c2410/include/mach/map.h
@@ -14,9 +14,53 @@
#define __ASM_ARCH_MAP_H
#include <plat/map-base.h>
-#include <plat/map.h>
-#define S3C2410_ADDR(x) S3C_ADDR(x)
+/*
+ * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400.
+ * So need to define it, and here is to avoid redefinition warning.
+ */
+#define S3C_UART_OFFSET (0x4000)
+
+#include <plat/map-s3c.h>
+
+/*
+ * interrupt controller is the first thing we put in, to make
+ * the assembly code for the irq detection easier
+ */
+#define S3C2410_PA_IRQ (0x4A000000)
+#define S3C24XX_SZ_IRQ SZ_1M
+
+/* memory controller registers */
+#define S3C2410_PA_MEMCTRL (0x48000000)
+#define S3C24XX_SZ_MEMCTRL SZ_1M
+
+/* UARTs */
+#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
+
+/* Timers */
+#define S3C2410_PA_TIMER (0x51000000)
+#define S3C24XX_SZ_TIMER SZ_1M
+
+/* Clock and Power management */
+#define S3C24XX_SZ_CLKPWR SZ_1M
+
+/* USB Device port */
+#define S3C2410_PA_USBDEV (0x52000000)
+#define S3C24XX_SZ_USBDEV SZ_1M
+
+/* Watchdog */
+#define S3C2410_PA_WATCHDOG (0x53000000)
+#define S3C24XX_SZ_WATCHDOG SZ_1M
+
+/* Standard size definitions for peripheral blocks. */
+
+#define S3C24XX_SZ_UART SZ_1M
+#define S3C24XX_SZ_IIS SZ_1M
+#define S3C24XX_SZ_ADC SZ_1M
+#define S3C24XX_SZ_SPI SZ_1M
+#define S3C24XX_SZ_SDI SZ_1M
+#define S3C24XX_SZ_NAND SZ_1M
+#define S3C24XX_SZ_GPIO SZ_1M
/* USB host controller */
#define S3C2410_PA_USBHOST (0x49000000)
@@ -75,10 +119,8 @@
/* S3C2412 memory and IO controls */
#define S3C2412_PA_SSMC (0x4F000000)
-#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
#define S3C2412_PA_EBI (0x48800000)
-#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
/* physical addresses of all the chip-select areas */
@@ -100,12 +142,10 @@
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
-#define S3C24XX_PA_UART S3C2410_PA_UART
#define S3C24XX_PA_TIMER S3C2410_PA_TIMER
#define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV
#define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG
#define S3C24XX_PA_IIS S3C2410_PA_IIS
-#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
#define S3C24XX_PA_RTC S3C2410_PA_RTC
#define S3C24XX_PA_ADC S3C2410_PA_ADC
#define S3C24XX_PA_SPI S3C2410_PA_SPI
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index a1f13f0..23a1d71 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -16,6 +16,7 @@
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
+#include <plat/map-s3c.h>
/*
* Post-mux Chip Select Regions Xm0CSn_
@@ -83,7 +84,6 @@
#define S3C64XX_PA_IIC1 (0x7F00F000)
#define S3C64XX_PA_GPIO (0x7F008000)
-#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
#define S3C64XX_SZ_GPIO SZ_4K
#define S3C64XX_PA_SDRAM (0x50000000)
@@ -94,16 +94,10 @@
#define S3C64XX_PA_VIC1 (0x71300000)
#define S3C64XX_PA_MODEM (0x74108000)
-#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
#define S3C64XX_PA_USBHOST (0x74300000)
#define S3C64XX_PA_USB_HSPHY (0x7C100000)
-#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
-
-/* place VICs close together */
-#define VA_VIC0 (S3C_VA_IRQ + 0x00)
-#define VA_VIC1 (S3C_VA_IRQ + 0x10000)
/* compatibiltiy defines. */
#define S3C_PA_TIMER S3C64XX_PA_TIMER
@@ -119,7 +113,6 @@
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
-#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
deleted file mode 100644
index bd534d3..0000000
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* linux/include/asm-arm/plat-s3c24xx/map.h
- *
- * Copyright (c) 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- *
- * S3C24XX - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S3C24XX_MAP_H
-#define __ASM_PLAT_S3C24XX_MAP_H
-
-/* interrupt controller is the first thing we put in, to make
- * the assembly code for the irq detection easier
- */
-#define S3C24XX_VA_IRQ S3C_VA_IRQ
-#define S3C2410_PA_IRQ (0x4A000000)
-#define S3C24XX_SZ_IRQ SZ_1M
-
-/* memory controller registers */
-#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
-#define S3C2410_PA_MEMCTRL (0x48000000)
-#define S3C24XX_SZ_MEMCTRL SZ_1M
-
-/* UARTs */
-#define S3C24XX_VA_UART S3C_VA_UART
-#define S3C2410_PA_UART (0x50000000)
-#define S3C24XX_SZ_UART SZ_1M
-#define S3C_UART_OFFSET (0x4000)
-
-#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET)))
-
-/* Timers */
-#define S3C24XX_VA_TIMER S3C_VA_TIMER
-#define S3C2410_PA_TIMER (0x51000000)
-#define S3C24XX_SZ_TIMER SZ_1M
-
-/* Clock and Power management */
-#define S3C24XX_VA_CLKPWR S3C_VA_SYS
-#define S3C24XX_SZ_CLKPWR SZ_1M
-
-/* USB Device port */
-#define S3C2410_PA_USBDEV (0x52000000)
-#define S3C24XX_SZ_USBDEV SZ_1M
-
-/* Watchdog */
-#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
-#define S3C2410_PA_WATCHDOG (0x53000000)
-#define S3C24XX_SZ_WATCHDOG SZ_1M
-
-/* Standard size definitions for peripheral blocks. */
-
-#define S3C24XX_SZ_IIS SZ_1M
-#define S3C24XX_SZ_ADC SZ_1M
-#define S3C24XX_SZ_SPI SZ_1M
-#define S3C24XX_SZ_SDI SZ_1M
-#define S3C24XX_SZ_NAND SZ_1M
-
-/* GPIO ports */
-
-/* the calculation for the VA of this must ensure that
- * it is the same distance apart from the UART in the
- * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 mapping. This puts it (currently) at
- * 0xFA800000, which is not in the way of any current mapping
- * by the base system.
-*/
-
-#define S3C2410_PA_GPIO (0x56000000)
-#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
-#define S3C24XX_SZ_GPIO SZ_1M
-
-
-/* ISA style IO, for each machine to sort out mappings for, if it
- * implements it. We reserve two 16M regions for ISA.
- */
-
-#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
-#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
-
-/* deal with the registers that move under the 2412/2413 */
-
-#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
-#ifndef __ASSEMBLY__
-extern void __iomem *s3c24xx_va_gpio2;
-#endif
-#ifdef CONFIG_CPU_S3C2412_ONLY
-#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
-#else
-#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
-#endif
-#else
-#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
-#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
-#endif
-
-#endif /* __ASM_PLAT_S3C24XX_MAP_H */
diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h
new file mode 100644
index 0000000..7d04875
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/map-s3c.h
@@ -0,0 +1,84 @@
+/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@xxxxxxxxxxxx>
+ *
+ * S3C24XX - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_PLAT_MAP_S3C_H
+#define __ASM_PLAT_MAP_S3C_H __FILE__
+
+#define S3C24XX_VA_IRQ S3C_VA_IRQ
+#define S3C24XX_VA_MEMCTRL S3C_VA_MEM
+#define S3C24XX_VA_UART S3C_VA_UART
+
+#define S3C24XX_VA_TIMER S3C_VA_TIMER
+#define S3C24XX_VA_CLKPWR S3C_VA_SYS
+#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG
+
+#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000)
+#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000)
+
+#define S3C2410_PA_UART (0x50000000)
+#define S3C24XX_PA_UART S3C2410_PA_UART
+
+#ifndef S3C_UART_OFFSET
+#define S3C_UART_OFFSET (0x400)
+#endif
+
+/*
+ * GPIO ports
+ *
+ * the calculation for the VA of this must ensure that
+ * it is the same distance apart from the UART in the
+ * phsyical address space, as the initial mapping for the IO
+ * is done as a 1:1 mapping. This puts it (currently) at
+ * 0xFA800000, which is not in the way of any current mapping
+ * by the base system.
+*/
+
+#define S3C2410_PA_GPIO (0x56000000)
+#define S3C24XX_PA_GPIO S3C2410_PA_GPIO
+
+#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART)
+#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000)
+
+#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000)
+#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000)
+
+#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
+
+/*
+ * ISA style IO, for each machine to sort out mappings for,
+ * if it implements it. We reserve two 16M regions for ISA.
+ */
+
+#define S3C2410_ADDR(x) S3C_ADDR(x)
+
+#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000)
+#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000)
+
+/* deal with the registers that move under the 2412/2413 */
+
+#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413)
+#ifndef __ASSEMBLY__
+extern void __iomem *s3c24xx_va_gpio2;
+#endif
+#ifdef CONFIG_CPU_S3C2412_ONLY
+#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10)
+#else
+#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2
+#endif
+#else
+#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO
+#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO
+#endif
+
+#include <plat/map-s5p.h>
+
+#endif /* __ASM_PLAT_MAP_S3C_H */
diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h
similarity index 94%
rename from arch/arm/plat-s5p/include/plat/map-s5p.h
rename to arch/arm/plat-samsung/include/plat/map-s5p.h
index 36d3551..c2d7bda 100644
--- a/arch/arm/plat-s5p/include/plat/map-s5p.h
+++ b/arch/arm/plat-samsung/include/plat/map-s5p.h
@@ -1,4 +1,4 @@
-/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h
+/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
@@ -40,8 +40,6 @@
#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
-#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
@@ -58,4 +56,6 @@
#define S3C_UART_OFFSET (0x400)
#endif
+#include <plat/map-s3c.h>
+
#endif /* __ASM_PLAT_MAP_S5P_H */
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
