Kukjin Kim wrote: > > Hi Arnd, > > This is pull request for Samsung fixes for v3.1-rc3. > > Please pull Samsung fixes from: > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git > samsung-fixes > > These things are for _real_ fixing. > > And as a note, following is only for v3.1: > > 5d747c6 ARM: S5P: fix bug in spdif_clk_get_rate > 3f6065d ARM: S5P: add required chained_irq_enter/exit to gpio-int code > 70b0e82 ARM: EXYNOS4: add required chained_irq_enter/exit to eint code > 995b528 ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handler > 7e1291d ARM: S5PV210: Fix build warning > 5a1993f ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device > 6b875cb ARM: EXYNOS4: remove duplicated inclusion > af8a9f6 ARM: EXYNOS4: Fix wrong devname to support clkdev > b8a297d ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set() > ac0d151 ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit() > > Of course, others should be fixed on stable kernel. > > f98d429 ARM: S3C64XX: Fix build break in PM debug > d2edddf ARM: EXYNOS4: Add restart hook for proper reboot > 2b431ff ARM: EXYNOS4: Increase reset delay for USB HOST PHY > c1a238a ARM: EXYNOS4: Use the correct regulator names on universal_c210 > > So will send above to stable@xxxxxxxxxx soon. > > If any problems, please let me know. > Hi Arnd, any problem? I can't find this yet in your -fixes branch. As you said before, if there are fixes in -fixes branch, it should be handled faster than others. Maybe missed? Or should I need to send this to Linus directly?... I think, that should be fixed now and there is no dependency with other ARM stuff. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. > Thanks. > > Best regards, > Kgene. > -- > Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, > SW Solution Development Team, Samsung Electronics Co., Ltd. > > The following changes since commit > 93ee7a9340d64f20295aacc3fb6a22b759323280: > > Linux 3.1-rc2 (2011-08-14 15:09:08 -0700) > > are available in the git repository at: > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git > samsung-fixes > > Abhilash Kesavan (2): > ARM: S5PV210: Fix build warning > ARM: S3C64XX: Fix build break in PM debug > > Huang Weiyi (1): > ARM: EXYNOS4: remove duplicated inclusion > > Jonghwan Choi (1): > ARM: EXYNOS4: Fix wrong devname to support clkdev > > Kukjin Kim (2): > ARM: S5P64X0: Replace irq_gc_ack() with irq_gc_ack_set_bit() > ARM: SAMSUNG: Fix Section mismatch in samsung_bl_set() > > Kyungmin Park (2): > ARM: EXYNOS4: Use the correct regulator names on universal_c210 > ARM: EXYNOS4: Add restart hook for proper reboot > > Marek Szyprowski (3): > ARM: SAMSUNG: Add chained enrty/exit call to timer interrupt handler > ARM: EXYNOS4: add required chained_irq_enter/exit to eint code > ARM: S5P: add required chained_irq_enter/exit to gpio-int code > > Naveen Krishna Chatradhi (1): > ARM: S5P: fix bug in spdif_clk_get_rate > > Sylwester Nawrocki (1): > ARM: EXYNOS4: Fix the IRQ definitions for MIPI CSIS device > > Yulgon Kim (1): > ARM: EXYNOS4: Increase reset delay for USB HOST PHY > > arch/arm/mach-exynos4/clock.c | 2 +- > arch/arm/mach-exynos4/cpu.c | 11 ++++++++++- > arch/arm/mach-exynos4/include/mach/irqs.h | 5 ++--- > arch/arm/mach-exynos4/include/mach/regs-pmu.h | 2 ++ > arch/arm/mach-exynos4/irq-eint.c | 7 +++++++ > arch/arm/mach-exynos4/mach-universal_c210.c | 4 ++-- > arch/arm/mach-exynos4/setup-usb-phy.c | 2 +- > arch/arm/mach-s3c64xx/pm.c | 1 + > arch/arm/mach-s5p64x0/irq-eint.c | 2 +- > arch/arm/mach-s5pv210/pm.c | 2 +- > arch/arm/plat-s5p/clock.c | 2 +- > arch/arm/plat-s5p/irq-gpioint.c | 6 ++++++ > arch/arm/plat-samsung/include/plat/backlight.h | 2 +- > arch/arm/plat-samsung/irq-vic-timer.c | 5 +++++ > 14 files changed, 41 insertions(+), 12 deletions(-) > > -- -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |