Jassi Brar wrote:
> Sent: Monday, August 22, 2011 7:14 PM
> To: Boojin Kim
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-samsung-
> soc@xxxxxxxxxxxxxxx; Vinod Koul; Kukjin Kim; Dan Williams; Mark Brown;
> Grant Likely; Russell King
> Subject: Re: [PATCH v6 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG
> command
>
> On Fri, Aug 19, 2011 at 2:24 PM, Boojin Kim <boojin.kim@xxxxxxxxxxx>
> wrote:
> > Signed-off-by: Boojin Kim <boojin.kim@xxxxxxxxxxx>
> > Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
> > Acked-by: Vinod Koul <vinod.koul@xxxxxxxxx>
> > Cc: Dan Williams <dan.j.williams@xxxxxxxxx>
> > Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> > ---
> > drivers/dma/pl330.c | 56 ++++++++++++++++++++++++++++++++++++++---
> ---------
> > 1 files changed, 42 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> > index d5829c7..59943ec 100644
> > --- a/drivers/dma/pl330.c
> > +++ b/drivers/dma/pl330.c
> > @@ -73,6 +73,7 @@ struct dma_pl330_chan {
> >
> > /* For D-to-M and M-to-D channels */
> > int burst_sz; /* the peripheral fifo width */
> > + int burst_len; /* the number of burst */
> > dma_addr_t fifo_addr;
> > };
> >
> > @@ -261,25 +262,52 @@ static int pl330_alloc_chan_resources(struct
> dma_chan *chan)
> > static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd
> cmd, unsigned long arg)
> > {
> > struct dma_pl330_chan *pch = to_pchan(chan);
> > - struct dma_pl330_desc *desc;
> > + struct dma_pl330_desc *desc, *_dt;
> > unsigned long flags;
> > + struct dma_pl330_dmac *pdmac = pch->dmac;
> > + struct dma_slave_config *slave_config;
> > + LIST_HEAD(list);
> >
> > - /* Only supports DMA_TERMINATE_ALL */
> > - if (cmd != DMA_TERMINATE_ALL)
> > - return -ENXIO;
> > -
> > - spin_lock_irqsave(&pch->lock, flags);
> > -
> > - /* FLUSH the PL330 Channel thread */
> > - pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
> > + switch (cmd) {
> > + case DMA_TERMINATE_ALL:
> > + spin_lock_irqsave(&pch->lock, flags);
> >
> > - /* Mark all desc done */
> > - list_for_each_entry(desc, &pch->work_list, node)
> > - desc->status = DONE;
> > + /* FLUSH the PL330 Channel thread */
> > + pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
> >
> > - spin_unlock_irqrestore(&pch->lock, flags);
> > + /* Mark all desc done */
> > + list_for_each_entry_safe(desc, _dt, &pch->work_list ,
> node) {
> > + desc->status = DONE;
> > + pch->completed = desc->txd.cookie;
> > + list_move_tail(&desc->node, &list);
> > + }
> >
> > - pl330_tasklet((unsigned long) pch);
> > + list_splice_tail_init(&list, &pdmac->desc_pool);
> > + spin_unlock_irqrestore(&pch->lock, flags);
> > + break;
> > + case DMA_SLAVE_CONFIG:
> > + slave_config = (struct dma_slave_config *)arg;
> > +
> > + if (slave_config->direction == DMA_TO_DEVICE) {
> > + if (slave_config->dst_addr)
> > + pch->fifo_addr = slave_config->dst_addr;
> > + if (slave_config->dst_addr_width)
> > + pch->burst_sz = __ffs(slave_config-
> >dst_addr_width);
> > + if (slave_config->dst_maxburst)
> > + pch->burst_len = slave_config-
> >dst_maxburst;
> > + } else if (slave_config->direction == DMA_FROM_DEVICE)
> {
> > + if (slave_config->src_addr)
> > + pch->fifo_addr = slave_config->src_addr;
> > + if (slave_config->src_addr_width)
> > + pch->burst_sz = __ffs(slave_config-
> >src_addr_width);
> > + if (slave_config->src_maxburst)
> > + pch->burst_len = slave_config-
> >src_maxburst;
> > + }
> > + break;
> > + default:
> > + dev_err(pch->dmac->pif.dev, "Not supported
> command.\n");
> > + return -ENXIO;
> > + }
>
> Apart from the alleged purpose "Support DMA_SLAVE_CONFIG command"
> this patch also modifies the behavior of DMA_TERMINATE_ALL.
> If the change is intended, please split it into two patches and
> explain the reason.
> Otherwise, restore the behavior.
I will address your comment.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
