The S3C6400 serial glue driver(used by S5P64X0) needs the clock name to be
pclk or uclk1. Correct the clock name in init.c to pclk and source pclk
from pclk_low to get the correct rate.
Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx>
---
arch/arm/mach-s5p64x0/clock-s5p6440.c | 2 +-
arch/arm/mach-s5p64x0/clock-s5p6450.c | 2 +-
arch/arm/mach-s5p64x0/init.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 0e9cd30..4b594a4 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -554,7 +554,7 @@ void __init_or_cpufreq s5p6440_setup_clocks(void)
clk_f.rate = fclk;
clk_h.rate = hclk;
- clk_p.rate = pclk;
+ clk_p.rate = pclk_low;
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index d9dc16c..eca9a57 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -613,7 +613,7 @@ void __init_or_cpufreq s5p6450_setup_clocks(void)
clk_f.rate = fclk;
clk_h.rate = hclk;
- clk_p.rate = pclk;
+ clk_p.rate = pclk_low;
for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
s3c_set_clksrc(&clksrcs[ptr], true);
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
index 79833ca..ee25e28 100644
--- a/arch/arm/mach-s5p64x0/init.c
+++ b/arch/arm/mach-s5p64x0/init.c
@@ -25,7 +25,7 @@
static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
[0] = {
- .name = "pclk_low",
+ .name = "pclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0,
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
