Pave the way for adding PM support on S5P64X0, which is more similar to the S3C64XX series than the S5P series. Hence, the common pm code (containing dummy functions) should not be used for S5P64X0. Signed-off-by: Abhilash Kesavan <a.kesavan@xxxxxxxxxxx> --- arch/arm/mach-exynos4/Kconfig | 1 + arch/arm/mach-s5pv210/Kconfig | 1 + arch/arm/plat-s5p/Kconfig | 6 ++++++ arch/arm/plat-s5p/Makefile | 3 +-- 4 files changed, 9 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 0c77ab9..77362c2 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -12,6 +12,7 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool select S3C_PL330_DMA + select S5P_PM if PM help Enable EXYNOS4210 CPU support diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index aaeb44a..b31e866 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -14,6 +14,7 @@ config CPU_S5PV210 select S3C_PL330_DMA select S5P_EXT_INT select S5P_HRT + select S5P_PM if PM help Enable S5PV210 CPU support diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9843c95..3ca5341 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -43,6 +43,12 @@ config S5P_HRT help Use the High Resolution timer support +config S5P_PM + bool + help + Common code for power management support on S5P and newer SoCs + Note: Do not select this for S5P6440 and S5P6450. + comment "System MMU" config S5P_SYSTEM_MMU diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4b53e04..735c270 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -20,8 +20,7 @@ obj-y += irq.o obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o -obj-$(CONFIG_PM) += pm.o -obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_S5P_PM) += pm.o irq-pm.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |