Hi Rajeshwari,
Please find my comments below:
On 08/08/2011 02:17 PM, Rajeshwari Shinde wrote:
This patch provides pin-mux setup files for HSMMC support on
S5P6440 and S5P6450 platforms.
Signed-off-by: Rajeshwari Shinde<rajeshwari.s@xxxxxxxxxxx>
---
arch/arm/mach-s5p64x0/Makefile | 2 +
arch/arm/mach-s5p64x0/setup-sdhci-gpio.c | 109 ++++++++++++++++++++++++++++++
arch/arm/mach-s5p64x0/setup-sdhci.c | 46 +++++++++++++
3 files changed, 157 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
create mode 100644 arch/arm/mach-s5p64x0/setup-sdhci.c
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index 5f6afdf..6642448 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -28,3 +28,5 @@ obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P64X0_SETUP_SDHCI) += setup-sdhci.o
+obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
new file mode 100644
index 0000000..616b277
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
@@ -0,0 +1,109 @@
+/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include<linux/platform_device.h>
+#include<linux/io.h>
+#include<linux/gpio.h>
+
+#include<mach/regs-gpio.h>
+#include<mach/regs-clock.h>
+
+#include<plat/gpio-cfg.h>
+#include<plat/sdhci.h>
+
+#define S5P6450_ID (0x50000)
+
+void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
You have used struct platform_device *pdev and struct platform_device
*dev alternatively in this patch series. Its better to maintain
consistency. As a practice pdev is used for struct platform_device and
dev is used for struct device for keeping code readable (else it is
confusing as one above)
+ unsigned int id = __raw_readl(S5P64X0_SYS_ID)& 0xFF000;
+
proper indentation of code required.
+ /* Set all the necessary GPG pins to special-function 2 -
+ * CLK, CMD and Data pins
+ */
+ if (id == S5P6450_ID)
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+
+ /* Set GPG[6] pin to special-function 2 - MMC0 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (id == S5P6450_ID) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
+ }
+ }
+}
+
+void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+ unsigned int id = __raw_readl(S5P64X0_SYS_ID)& 0xFF000;
indentation between &
+
+ /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
+ if (id == S5P6450_ID)
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
+
+ switch (width) {
+ case 8:
+ /* Set data pins GPH[6:9] special-function 2 */
+ if (id == S5P6450_ID)
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ case 4:
+ /* set data pins GPH[2:5] special-function 2 */
+ if (id == S5P6450_ID)
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ default:
+ break;
+ }
+
+ /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (id == S5P6450_ID) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
+ }
+ }
+}
+
+void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
+
+ /* Set data pins GPH[6:9] pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
+}
+
+void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci.c b/arch/arm/mach-s5p64x0/setup-sdhci.c
new file mode 100644
index 0000000..4c64db6
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-sdhci.c
@@ -0,0 +1,46 @@
+/* linux/arch/arm/mach-s5p64x0/setup-sdhci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P64X0 - Helper functions for setting up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include<linux/kernel.h>
+#include<linux/types.h>
+#include<linux/interrupt.h>
+#include<linux/platform_device.h>
+#include<linux/io.h>
+
+#include<linux/mmc/card.h>
+#include<linux/mmc/host.h>
+
+#include<plat/regs-sdhci.h>
+#include<plat/sdhci.h>
+
+void s5p64x0_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2;
+
+ /* don't need to alter anything acording to card-type */
Should the comment be -> "no need to alter anything according to card
type" instead?
+ __raw_writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
+ r + S3C64XX_SDHCI_CONTROL4);
+
+ ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2&= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
ctrl &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ __raw_writel(0, r + S3C_SDHCI_CONTROL3);
+}
Regards,
Subash
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
