Re: [PATCH v2 3/3] arm: dt: Add device tree support for i2c instance 0 and 1 on exynos4 dt machine

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jul 22, 2011 at 03:48:38PM +0530, Thomas Abraham wrote:
> Add device node for i2c instance 0 and 1 and list all its connected slave
> devices.
> 
> Signed-off-by: Thomas Abraham <thomas.abraham at linaro.org>
> ---
>  arch/arm/boot/dts/exynos4-smdkv310.dts  |   45 +++++++++++++++++++++++++++++++
>  arch/arm/mach-exynos4/Kconfig           |    2 +
>  arch/arm/mach-exynos4/mach-exynos4-dt.c |   23 ++++++++++++++++
>  3 files changed, 70 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/exynos4-smdkv310.dts b/arch/arm/boot/dts/exynos4-smdkv310.dts
> index d65c18c..6fd2032 100644
> --- a/arch/arm/boot/dts/exynos4-smdkv310.dts
> +++ b/arch/arm/boot/dts/exynos4-smdkv310.dts
> @@ -41,6 +41,12 @@
>  			irq-start = <61>;
>  		};
>  
> +		gpd1: gpio-controller@114000C0 {
> +			compatible = "samsung,exynos4-gpio-gpd1","samsung,exynos4-gpio";
> +			#gpio-cells = <2>;
> +			gpio-controller;
> +		};
> +
>  		watchdog@10060000 {
>  			compatible = "samsung,s3c2410-wdt";
>  			reg = <0x10060000 0x400>;
> @@ -64,5 +70,44 @@
>  			samsung,sdhci-cd-type = <0>;
>  			samsung,sdhci-clkdiv-external;
>  		};
> +
> +		i2c@13860000 {
> +			compatible = "samsung,s3c2440-i2c";
> +			reg = <0x13860000 0x100>;
> +			interrupts = <344>;
> +			samsung,i2c-sda-delay = <100>;
> +			samsung,i2c-max-bus-freq = <20000>;
> +			gpios = <&gpd1 0 0 /* SDA */
> +				 &gpd1 1 0 /* SCL */>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			eeprom@50 {
> +				compatible = "samsung,24ad0xd1";
> +				reg = <0x50>;
> +			};
> +
> +			eeprom@52 {
> +				compatible = "samsung,24ad0xd1";
> +				reg = <0x51>;
> +			};
> +		};
> +
> +		i2c@13870000 {
> +			compatible = "samsung,s3c2440-i2c";
> +			reg = <0x13870000 0x100>;
> +			interrupts = <345>;
> +			samsung,i2c-sda-delay = <100>;
> +			samsung,i2c-max-bus-freq = <100000>;
> +			gpios = <&gpd1 2 0 /* SDA */
> +				 &gpd1 3 0 /* SCL */>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			wm8994@1a {
> +				compatible = "wlf,wm8994";
> +				reg = <0x1a>;
> +			};
> +		};
>  	};
>  };
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index bb97b7e..06b43ca 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -193,6 +193,8 @@ config MACH_EXYNOS4_DT
>  	select S3C_DEV_HSMMC
>  	select S3C_DEV_HSMMC2
>  	select EXYNOS4_SETUP_SDHCI
> +	select EXYNOS4_SETUP_I2C0
> +	select EXYNOS4_SETUP_I2C1

Hmmm, there should be a better way do do this; but I don't have any
objections.

Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx>

>  	help
>  	  Machine support for Samsung Exynos4 machine with device tree enabled.
>  
> diff --git a/arch/arm/mach-exynos4/mach-exynos4-dt.c b/arch/arm/mach-exynos4/mach-exynos4-dt.c
> index 120665a..8b0cf8f 100644
> --- a/arch/arm/mach-exynos4/mach-exynos4-dt.c
> +++ b/arch/arm/mach-exynos4/mach-exynos4-dt.c
> @@ -23,7 +23,10 @@
>  #include <plat/regs-serial.h>
>  #include <plat/exynos4.h>
>  #include <plat/cpu.h>
> +#include <plat/devs.h>
>  #include <plat/sdhci.h>
> +#include <plat/iic.h>
> +#include <plat/iic-core.h>
>  
>  #include <mach/map.h>
>  
> @@ -63,6 +66,22 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
>  };
>  
>  /*
> + * The i2c driver does not handle the pinmux settings. Instead, the
> + * platform specific callback function is passed through the platform
> + * data that can handle the pinmux settings for the i2c module.
> + * Eventually, when the new pinmux api is merged, the i2c driver can
> + * be modified to handle the pinmux settings. This is temporary for
> + * now.
> + */
> +static struct s3c2410_platform_i2c exynos4_dt_i2c_data0 __initdata = {
> +	.cfg_gpio	= s3c_i2c0_cfg_gpio,
> +};
> +
> +static struct s3c2410_platform_i2c exynos4_dt_i2c_data1 __initdata = {
> +	.cfg_gpio	= s3c_i2c1_cfg_gpio,
> +};
> +
> +/*
>   * The following lookup table is used to override device names when devices
>   * are registered from device tree. Optionally, the platform data can also
>   * to supplied. The sdhci driver requires the device name to be overridden
> @@ -75,6 +94,10 @@ static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = {
>  				"s3c-sdhci.2", &s3c_hsmmc2_def_platdata),
>  	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", EXYNOS4_PA_HSMMC(0),
>  				"s3c-sdhci.0", &s3c_hsmmc0_def_platdata),
> +	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
> +				"s3c2440-i2c.0", &exynos4_dt_i2c_data0),
> +	OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1),
> +				"s3c2440-i2c.1", &exynos4_dt_i2c_data1),
>  	{},
>  };
>  
> -- 
> 1.6.6.rc2
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux