On Mon, Jul 25, 2011 at 6:58 AM, Boojin Kim <boojin.kim@xxxxxxxxxxx> wrote:
> diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c
> index 564bb53..e1c00cf 100644
> --- a/arch/arm/mach-exynos4/dma.c
> +++ b/arch/arm/mach-exynos4/dma.c
> @@ -21,151 +21,250 @@
> * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
> */
>
> -#include <linux/platform_device.h>
> #include <linux/dma-mapping.h>
> +#include <linux/amba/bus.h>
> +#include <linux/amba/pl330.h>
>
> +#include <asm/irq.h>
> #include <plat/devs.h>
> #include <plat/irqs.h>
>
> #include <mach/map.h>
> #include <mach/irqs.h>
> -
> -#include <plat/s3c-pl330-pdata.h>
> +#include <mach/dma.h>
>
> static u64 dma_dmamask = DMA_BIT_MASK(32);
>
> -static struct resource exynos4_pdma0_resource[] = {
> - [0] = {
> - .start = EXYNOS4_PA_PDMA0,
> - .end = EXYNOS4_PA_PDMA0 + SZ_4K,
> - .flags = IORESOURCE_MEM,
> - },
> - [1] = {
> - .start = IRQ_PDMA0,
> - .end = IRQ_PDMA0,
> - .flags = IORESOURCE_IRQ,
> +struct dma_pl330_peri pdma0_peri[32] = {
Please remove 32 from the list (it seems you don't always pass 32 elements)
Also for completeness, please explicitly write element indices below because
it's not some array of randomly placed elements.
Same for every other such occurance.
> + {
> + .peri_id = (u8)DMACH_PCM0_RX,
> + .rqtype = DEVTOMEM,
> + }, {
> + .peri_id = (u8)DMACH_PCM0_TX,
> + .rqtype = MEMTODEV,
> + }, {
> + .peri_id = (u8)DMACH_PCM2_RX,
> + .rqtype = DEVTOMEM,
> + }, {
> + .peri_id = (u8)DMACH_PCM2_TX,
> + .rqtype = MEMTODEV,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_MSM_REQ0,
> + }, {
> + .peri_id = (u8)DMACH_MSM_REQ2,
> + }, {
> + .peri_id = (u8)DMACH_SPI0_RX,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 1,
> + }, {
> + .peri_id = (u8)DMACH_SPI0_TX,
> + .rqtype = MEMTODEV,
> + .burst_sz = 1,
> + }, {
> + .peri_id = (u8)DMACH_SPI2_RX,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 1,
> + }, {
> + .peri_id = (u8)DMACH_SPI2_TX,
> + .rqtype = MEMTODEV,
> + .burst_sz = 1,
> + }, {
> + .peri_id = (u8)DMACH_I2S0S_TX,
> + .rqtype = MEMTODEV,
> + }, {
> + .peri_id = (u8)DMACH_I2S0_RX,
> + .rqtype = DEVTOMEM,
> + }, {
> + .peri_id = (u8)DMACH_I2S0_TX,
> + .rqtype = MEMTODEV,
> + }, {
> + .peri_id = (u8)DMACH_UART0_RX,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_UART0_TX,
> + .rqtype = MEMTODEV,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_UART2_RX,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_UART2_TX,
> + .rqtype = MEMTODEV,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_UART4_RX,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_UART4_TX,
> + .rqtype = MEMTODEV,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_SLIMBUS0_RX,
> + .rqtype = DEVTOMEM,
> + }, {
> + .peri_id = (u8)DMACH_SLIMBUS0_TX,
> + .rqtype = MEMTODEV,
> + }, {
> + .peri_id = (u8)DMACH_SLIMBUS2_RX,
> + .rqtype = DEVTOMEM,
> + }, {
> + .peri_id = (u8)DMACH_SLIMBUS2_TX,
> + .rqtype = MEMTODEV,
> + }, {
> + .peri_id = (u8)DMACH_SLIMBUS4_RX,
> + .rqtype = DEVTOMEM,
> + }, {
> + .peri_id = (u8)DMACH_SLIMBUS4_TX,
> + .rqtype = MEMTODEV,
> + }, {
> + .peri_id = (u8)DMACH_AC97_MICIN,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_AC97_PCMIN,
> + .rqtype = DEVTOMEM,
> + .burst_sz = 4,
> + }, {
> + .peri_id = (u8)DMACH_AC97_PCMOUT,
> + .rqtype = MEMTODEV,
> + .burst_sz = 4,
> },
> };
>
> -static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
> - .peri = {
> - [0] = DMACH_PCM0_RX,
> - [1] = DMACH_PCM0_TX,
> - [2] = DMACH_PCM2_RX,
> - [3] = DMACH_PCM2_TX,
> - [4] = DMACH_MSM_REQ0,
> - [5] = DMACH_MSM_REQ2,
> - [6] = DMACH_SPI0_RX,
> - [7] = DMACH_SPI0_TX,
> - [8] = DMACH_SPI2_RX,
> - [9] = DMACH_SPI2_TX,
> - [10] = DMACH_I2S0S_TX,
> - [11] = DMACH_I2S0_RX,
> - [12] = DMACH_I2S0_TX,
> - [13] = DMACH_I2S2_RX,
> - [14] = DMACH_I2S2_TX,
> - [15] = DMACH_UART0_RX,
> - [16] = DMACH_UART0_TX,
> - [17] = DMACH_UART2_RX,
> - [18] = DMACH_UART2_TX,
> - [19] = DMACH_UART4_RX,
> - [20] = DMACH_UART4_TX,
> - [21] = DMACH_SLIMBUS0_RX,
> - [22] = DMACH_SLIMBUS0_TX,
> - [23] = DMACH_SLIMBUS2_RX,
> - [24] = DMACH_SLIMBUS2_TX,
> - [25] = DMACH_SLIMBUS4_RX,
> - [26] = DMACH_SLIMBUS4_TX,
> - [27] = DMACH_AC97_MICIN,
> - [28] = DMACH_AC97_PCMIN,
> - [29] = DMACH_AC97_PCMOUT,
> - [30] = DMACH_MAX,
> - [31] = DMACH_MAX,
> - },
> +struct dma_pl330_platdata exynos4_pdma0_pdata = {
> + .nr_valid_peri = 32,
Perhaps, this is why you had to add the NULL peri check.
Please use ARRAY_SIZE here.
Same for every other such occurance.
��.n��������+%������w��{.n�����{��Ʀ����)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
