On Mon, 2011-07-25 at 10:28 +0900, Boojin Kim wrote:
> This patch adds support DMA_SLAVE_CONFIG command.
>
> Signed-off-by: Boojin Kim <boojin.kim@xxxxxxxxxxx>
> ---
> drivers/dma/pl330.c | 53 +++++++++++++++++++++++++++++++++++++-------------
> 1 files changed, 39 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
> index 586ab39..880f010 100644
> --- a/drivers/dma/pl330.c
> +++ b/drivers/dma/pl330.c
> @@ -256,25 +256,50 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan)
> static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg)
> {
> struct dma_pl330_chan *pch = to_pchan(chan);
> - struct dma_pl330_desc *desc;
> + struct dma_pl330_desc *desc, *_dt;
> unsigned long flags;
> + struct dma_pl330_dmac *pdmac = pch->dmac;
> + struct dma_slave_config *slave_config;
> + struct dma_pl330_peri *peri;
> + LIST_HEAD(list);
>
> - /* Only supports DMA_TERMINATE_ALL */
> - if (cmd != DMA_TERMINATE_ALL)
> - return -ENXIO;
> -
> - spin_lock_irqsave(&pch->lock, flags);
> -
> - /* FLUSH the PL330 Channel thread */
> - pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
> + switch (cmd) {
> + case DMA_TERMINATE_ALL:
> + spin_lock_irqsave(&pch->lock, flags);
>
> - /* Mark all desc done */
> - list_for_each_entry(desc, &pch->work_list, node)
> - desc->status = DONE;
> + /* FLUSH the PL330 Channel thread */
> + pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH);
>
> - spin_unlock_irqrestore(&pch->lock, flags);
> + /* Mark all desc done */
> + list_for_each_entry_safe(desc, _dt, &pch->work_list , node) {
> + desc->status = DONE;
> + pch->completed = desc->txd.cookie;
> + list_move_tail(&desc->node, &list);
> + }
>
> - pl330_tasklet((unsigned long) pch);
> + list_splice_tail_init(&list, &pdmac->desc_pool);
> + spin_unlock_irqrestore(&pch->lock, flags);
> + break;
> + case DMA_SLAVE_CONFIG:
> + slave_config = (struct dma_slave_config *)arg;
> + peri = pch->chan.private;
> +
> + if (slave_config->direction == DMA_TO_DEVICE) {
> + if (slave_config->dst_addr)
> + peri->fifo_addr = slave_config->dst_addr;
> + if (slave_config->dst_addr_width)
> + peri->burst_sz = __ffs(slave_config->dst_addr_width);
This doesn't sound right, why can't you use xxx_maxburst field instead?
> + } else if (slave_config->direction == DMA_FROM_DEVICE) {
> + if (slave_config->src_addr)
> + peri->fifo_addr = slave_config->src_addr;
> + if (slave_config->src_addr_width)
> + peri->burst_sz = __ffs(slave_config->src_addr_width);
ditto...
> + }
> + break;
> + default:
> + dev_err(pch->dmac->pif.dev, "Not supported command.\n");
> + return -ENXIO;
> + }
>
> return 0;
> }
--
~Vinod Koul
Intel Corp.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
