RE: [PATCHv3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Chanwoo Choi wrote:
> 
> Use the generic power domains support to implement support for
> power domain on EXYNOS4210.
> 
> I refer to the following patch to implement what configure
> the clock-gating control register for block to turn off/on:
> http://git.infradead.org/users/kmpark/linux-2.6-
> samsung/commit/39a81876d034dcbdc2a4c4c4b847b3b49e38870c
> 
I think, this should be moved under "---"

> This patch is based on following "pm-domains" branch.
> http://git.kernel.org/?p=linux/kernel/git/rafael/suspend-
> 2.6.git;a=shortlog;h=refs/heads/pm-domains
> 
Same as above.

> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
> Signed-off-by: Myungjoo Ham <myungjoo.ham@xxxxxxxxxxx>
> Signed-off-by: Kyungmin.park <kyungmin.park@xxxxxxxxxxx>

Kyungmin Park?

> ---
>  arch/arm/mach-exynos4/Kconfig                      |    1 +
>  arch/arm/mach-exynos4/Makefile                     |    1 +
>  arch/arm/mach-exynos4/include/mach/pm-exynos4210.h |   53 ++++++
>  arch/arm/mach-exynos4/include/mach/regs-clock.h    |    8 +
>  arch/arm/mach-exynos4/mach-nuri.c                  |   18 ++
>  arch/arm/mach-exynos4/pm-exynos4210.c              |  184
> ++++++++++++++++++++
>  6 files changed, 265 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
>  create mode 100644 arch/arm/mach-exynos4/pm-exynos4210.c
> 
> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
> index 1435fc3..c5357b5 100644
> --- a/arch/arm/mach-exynos4/Kconfig
> +++ b/arch/arm/mach-exynos4/Kconfig
> @@ -183,6 +183,7 @@ config MACH_NURI
>  	select EXYNOS4_SETUP_SDHCI
>  	select EXYNOS4_SETUP_USB_PHY
>  	select SAMSUNG_DEV_PWM
> +	select PM_GENERIC_DOMAINS if PM

Do you _really_ think this should be under MACH_NURI?

>  	help
>  	  Machine support for Samsung Mobile NURI Board.
> 
> diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
> index 60fe5ec..0e9461f 100644
> --- a/arch/arm/mach-exynos4/Makefile
> +++ b/arch/arm/mach-exynos4/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-
> eint.o dma.o
>  obj-$(CONFIG_PM)		+= pm.o sleep.o
>  obj-$(CONFIG_CPU_FREQ)		+= cpufreq.o
>  obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
> +obj-$(CONFIG_CPU_EXYNOS4210)	+= pm-exynos4210.o
> 
>  obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
> 
> diff --git a/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> b/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> new file mode 100644
> index 0000000..ab09034
> --- /dev/null
> +++ b/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h
> @@ -0,0 +1,53 @@
> +/* linux/arch/arm/mach-exynos4/include/mach/pm-exynos4.h

According to your file name, should be linux/arch/arm/mach-exynos4/include/mach/pm-exynos4210.h ?

> + *
> + * Exynos4 Power management support

Is this for EXYNOS4 or only EXYNOS4210?

> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef PM_EXYNOS4210_H
> +#define PM_EXYNOS4210_H
> +
> +#include <linux/pm_domain.h>
> +#include <plat/pd.h>
> +
> +struct platform_device;
> +
> +struct exynos4210_pm_domain {
> +	struct generic_pm_domain genpd;
> +
> +	const char *name;
> +	void __iomem *base;
> +	u32 mask;
> +	int boot_on;
> +};
> +
> +static inline struct exynos4210_pm_domain *to_exynos4210_pd(
> +		struct generic_pm_domain *pd)
> +{
> +	return container_of(pd, struct exynos4210_pm_domain, genpd);
> +}
> +
> +#ifdef CONFIG_PM
> +extern struct exynos4210_pm_domain exynos4210_pd_mfc;
> +extern struct exynos4210_pm_domain exynos4210_pd_g3d;
> +extern struct exynos4210_pm_domain exynos4210_pd_lcd0;
> +extern struct exynos4210_pm_domain exynos4210_pd_lcd1;
> +extern struct exynos4210_pm_domain exynos4210_pd_tv;
> +extern struct exynos4210_pm_domain exynos4210_pd_cam;
> +extern struct exynos4210_pm_domain exynos4210_pd_gps;
> +
> +extern void exynos4210_init_pm_domain(struct exynos4210_pm_domain
> *exynos4210_pd);
> +extern void exynos4210_add_device_to_domain(struct exynos4210_pm_domain
> *exynos4210_pd,
> +				struct platform_device *pdev);
> +#else
> +#define exynos4210_init_pm_domain(pd) do { } while(0)
> +#define exynos4_add_device_to_domain(pd, pdev) do { } while(0)
> +#endif /* CONFIG_PM */
> +
> +#endif /* PM_EXYNOS4210_H */
> diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-
> exynos4/include/mach/regs-clock.h
> index 6e311c1..bc0fda9 100644
> --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
> +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
> @@ -171,6 +171,14 @@
>  #define S5P_CLKDIV_BUS_GPLR_SHIFT	(4)
>  #define S5P_CLKDIV_BUS_GPLR_MASK	(0x7 <<
> S5P_CLKDIV_BUS_GPLR_SHIFT)
> 
> +#define S5P_CLKGATE_BLOCK_CAM		(1<<0)

The blank should be added around "<<" like (1 << 0)

> +#define S5P_CLKGATE_BLOCK_TV		(1<<1)
> +#define S5P_CLKGATE_BLOCK_MFC		(1<<2)
> +#define S5P_CLKGATE_BLOCK_G3D		(1<<3)
> +#define S5P_CLKGATE_BLOCK_LCD0		(1<<4)
> +#define S5P_CLKGATE_BLOCK_LCD1		(1<<5)
> +#define S5P_CLKGATE_BLOCK_GPS		(1<<7)

Same...

> +
>  /* Compatibility defines and inclusion */
> 
>  #include <mach/regs-pmu.h>

Hmm...how about if this is required, just add the inclusion in c file?

Actually, you added above in pm-exynos4210.c...

> diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-
> nuri.c
> index 642702b..816c6f4 100644
> --- a/arch/arm/mach-exynos4/mach-nuri.c
> +++ b/arch/arm/mach-exynos4/mach-nuri.c
> @@ -37,6 +37,7 @@
>  #include <plat/iic.h>
> 
>  #include <mach/map.h>
> +#include <mach/pm-exynos4210.h>
> 
>  /* Following are default values for UCON, ULCON and UFCON UART registers */
>  #define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
> @@ -376,6 +377,21 @@ static struct platform_device *nuri_devices[] __initdata = {
>  	&nuri_backlight_device,
>  };
> 
> +static void __init nuri_power_domain_init(void)
> +{
> +	/* Initialize power-domain */
> +	exynos4210_init_pm_domain(&exynos4210_pd_mfc);
> +	exynos4210_init_pm_domain(&exynos4210_pd_g3d);
> +	exynos4210_init_pm_domain(&exynos4210_pd_lcd0);
> +	exynos4210_init_pm_domain(&exynos4210_pd_lcd1);
> +	exynos4210_init_pm_domain(&exynos4210_pd_tv);
> +	exynos4210_init_pm_domain(&exynos4210_pd_cam);
> +	exynos4210_init_pm_domain(&exynos4210_pd_gps);

Hmm, is this needed only on NURI?

> +
> +	/* Add device to power-domain */
> +	exynos4210_add_device_to_domain(&exynos4210_pd_lcd0,
> &nuri_lcd_device);
> +}
> +
>  static void __init nuri_map_io(void)
>  {
>  	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
> @@ -398,6 +414,8 @@ static void __init nuri_machine_init(void)
> 
>  	/* Last */
>  	platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
> +
> +	nuri_power_domain_init();
>  }
> 
>  MACHINE_START(NURI, "NURI")
> diff --git a/arch/arm/mach-exynos4/pm-exynos4210.c b/arch/arm/mach-
> exynos4/pm-exynos4210.c
> new file mode 100644
> index 0000000..f44dcef
> --- /dev/null
> +++ b/arch/arm/mach-exynos4/pm-exynos4210.c
> @@ -0,0 +1,184 @@
> +/* linux/arch/arm/mach-exynos4/pm-exynos4210.c
> + *
> + * Exynos4210 Power management support
> + *
> + * Copyright (c) 2011 Samsung Electronics Co., Ltd.
> + *		http://www.samsung.com
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/pm.h>
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/slab.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +#include <linux/io.h>
> +
> +#include <mach/regs-pmu.h>

As I said, so no need to add this inclusion in <mach/regs-clock.h>

> +#include <mach/regs-clock.h>
> +#include <mach/pm-exynos4210.h>
> +
> +#ifdef CONFIG_PM
> +static DEFINE_SPINLOCK(clkgate_block_lock);
> +
> +static int pd_power_down(struct generic_pm_domain *genpd)
> +{
> +	struct exynos4210_pm_domain *exynos4210_pd =
> to_exynos4210_pd(genpd);
> +	u32 timeout;
> +
> +	/* Disable the power of power-domain */
> +	__raw_writel(0, exynos4210_pd->base);
> +
> +	/* Wait max 1ms */
> +	timeout = 10;
> +	while (__raw_readl(exynos4210_pd->base + 0x4) &
> S5P_INT_LOCAL_PWR_EN) {
> +		if (timeout == 0) {
> +			printk(KERN_ERR "Power domain %s disable failed.\n",
> +				exynos4210_pd->name);
> +			return -ETIMEDOUT;
> +		}
> +		timeout--;
> +		udelay(100);
> +	}
> +
> +	/* Configure the clock-gating control register for block to turn off */
> +	if (exynos4210_pd->mask) {
> +		unsigned long flags;
> +		u32 reg;
> +
> +		spin_lock_irqsave(&clkgate_block_lock, flags);
> +		reg = __raw_readl(S5P_CLKGATE_BLOCK);
> +		reg &= ~exynos4210_pd->mask;
> +		__raw_writel(reg, S5P_CLKGATE_BLOCK);
> +		spin_unlock_irqrestore(&clkgate_block_lock, flags);
> +	}
> +
> +	return 0;
> +}
> +
> +static int pd_power_up(struct generic_pm_domain *genpd)
> +{
> +	struct exynos4210_pm_domain *exynos4210_pd =
> to_exynos4210_pd(genpd);
> +	u32 timeout;
> +
> +	/* Enable power domain */
> +	__raw_writel(S5P_INT_LOCAL_PWR_EN, exynos4210_pd->base);
> +
> +	/* Wait max 1ms */
> +	timeout = 10;
> +	while ((__raw_readl(exynos4210_pd->base + 0x4) &
> S5P_INT_LOCAL_PWR_EN)
> +		!= S5P_INT_LOCAL_PWR_EN) {
> +		if (timeout == 0) {
> +			printk(KERN_ERR "Power domain %s enable failed.\n",
> +				exynos4210_pd->name);
> +			return -ETIMEDOUT;
> +		}
> +		timeout--;
> +		udelay(100);
> +	}
> +
> +	/* Configure the clock-gating control register for block to turn on */
> +	if (exynos4210_pd->mask) {
> +		unsigned long flags;
> +		u32 reg;
> +
> +		spin_lock_irqsave(&clkgate_block_lock, flags);
> +		reg = __raw_readl(S5P_CLKGATE_BLOCK);
> +		reg |= exynos4210_pd->mask;
> +		__raw_writel(reg, S5P_CLKGATE_BLOCK);
> +		spin_unlock_irqrestore(&clkgate_block_lock, flags);
> +	}
> +
> +	return 0;
> +}

Would be better if you could add some common function for pd_power_up and _down...

I wonder why we need to add this for handling power domain not update current pd.
As you know, they are having same/similar purpose and functions...

> +
> +static bool pd_active_wakeup(struct device *dev)
> +{
> +	return true;
> +}
> +
> +void exynos4210_init_pm_domain(struct exynos4210_pm_domain
> *exynos4210_pd)
> +{
> +	struct generic_pm_domain *genpd;
> +
> +	if (!exynos4210_pd)
> +		return;
> +
> +	genpd = &exynos4210_pd->genpd;
> +
> +	pm_genpd_init(genpd, NULL, false);
> +	genpd->stop_device = pm_clk_suspend;
> +	genpd->start_device = pm_clk_resume;
> +	genpd->active_wakeup = pd_active_wakeup;
> +	genpd->power_off = pd_power_down;
> +	genpd->power_on = pd_power_up;
> +
> +	if (exynos4210_pd->boot_on)
> +		pd_power_up(&exynos4210_pd->genpd);
> +}
> +
> +void exynos4210_add_device_to_domain(struct exynos4210_pm_domain
> *exynos4210_pd,
> +				struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +
> +	if (exynos4210_pd && pdev)
> +		pm_genpd_add_device(&exynos4210_pd->genpd, dev);
> +}
> +
> +struct exynos4210_pm_domain exynos4210_pd_mfc = {
> +	.name		= "PD_MFC",
> +	.base		= S5P_PMU_MFC_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_MFC,
> +	.boot_on	= 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_g3d = {
> +	.name		= "PD_G3D",
> +	.base		= S5P_PMU_G3D_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_G3D,
> +	.boot_on	= 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_lcd0 = {
> +	.name		= "PD_LCD0",
> +	.base		= S5P_PMU_LCD0_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_LCD0,
> +	.boot_on	= 1,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_lcd1 = {
> +	.name		= "PD_LCD1",
> +	.base		= S5P_PMU_LCD1_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_LCD1,
> +	.boot_on	= 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_tv = {
> +	.name		= "PD_TV",
> +	.base		= S5P_PMU_TV_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_TV,
> +	.boot_on	= 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_cam = {
> +	.name		= "PD_CAM",
> +	.base		= S5P_PMU_CAM_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_CAM,
> +	.boot_on	= 0,
> +};
> +
> +struct exynos4210_pm_domain exynos4210_pd_gps = {
> +	.name		= "PD_GPS",
> +	.base		= S5P_PMU_GPS_CONF,
> +	.mask		= S5P_CLKGATE_BLOCK_GPS,
> +	.boot_on	= 0,
> +};
> +
> +#endif	/* CONFIG_PM */
> --
> 1.7.0.4


Thanks.

Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux