This patch allows kernel codes to use values from NTC LM-Sensor
driver, which allows SYSFS access only.
Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/plat-samsung/dev-adc.c | 62 ++++++++++++++++++++++++++
arch/arm/plat-samsung/include/plat/adc-ntc.h | 19 ++++++++
2 files changed, 81 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/plat-samsung/include/plat/adc-ntc.h
diff --git a/arch/arm/plat-samsung/dev-adc.c b/arch/arm/plat-samsung/dev-adc.c
index 622972c..526097a 100644
--- a/arch/arm/plat-samsung/dev-adc.c
+++ b/arch/arm/plat-samsung/dev-adc.c
@@ -22,6 +22,8 @@
#include <plat/devs.h>
#include <plat/cpu.h>
+#include "../../../fs/sysfs/sysfs.h"
+
static struct resource s3c_adc_resource[] = {
[0] = {
.start = SAMSUNG_PA_ADC,
@@ -101,3 +103,63 @@ struct platform_device s3c_device_adc_ntc_thermistor = {
.platform_data = &ntc_adc_pdata,
},
};
+
+static struct device_attribute *ntc_attr;
+
+static int init_s3c_adc_ntc_read(void)
+{
+ struct kobject *ntc;
+ struct sysfs_dirent *ntc_d;
+
+ ntc = &s3c_device_adc_ntc_thermistor.dev.kobj;
+ ntc_d = sysfs_get_dirent(ntc->sd, get_ktype(ntc)->namespace(ntc),
+ "temp1_input");
+ if (!ntc_d || sysfs_type(ntc_d) != SYSFS_KOBJ_ATTR) {
+ dev_err(&s3c_device_adc_ntc_thermistor.dev,
+ "Cannot initialize thermistor dirent info.\n");
+ if (ntc_d)
+ sysfs_put(ntc_d);
+ return -ENODEV;
+ }
+ ntc_attr = container_of(ntc_d->s_attr.attr, struct device_attribute,
+ attr);
+
+ sysfs_put(ntc_d);
+ if (IS_ERR(ntc_attr)) {
+ dev_err(&s3c_device_adc_ntc_thermistor.dev,
+ "Cannot access NTC thermistor.\n");
+ return PTR_ERR(ntc_attr);
+ }
+
+ return 0;
+}
+
+/* A helper function to read values from NTC, in 1/1000 Centigrade */
+int read_s3c_adc_ntc(int *mC)
+{
+ char buf[32];
+ int ret;
+
+ /* init should be done after ADC and NTC are probed */
+ if (ntc_attr == NULL) {
+ ret = init_s3c_adc_ntc_read();
+ if (ret) {
+ if (ntc_attr == NULL)
+ ntc_attr = ERR_PTR(ret);
+ return ret;
+ }
+ }
+
+ if (IS_ERR(ntc_attr))
+ return -ENODEV;
+
+ if (!ntc_attr->show)
+ return -EINVAL;
+
+ ret = ntc_attr->show(&s3c_device_adc_ntc_thermistor.dev, ntc_attr, buf);
+ if (ret < 0)
+ return ret;
+ sscanf(buf, "%d", mC);
+
+ return 0;
+}
diff --git a/arch/arm/plat-samsung/include/plat/adc-ntc.h b/arch/arm/plat-samsung/include/plat/adc-ntc.h
new file mode 100644
index 0000000..3d74118
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/adc-ntc.h
@@ -0,0 +1,19 @@
+/* linux/arch/arm/plat-samsung/include/plat/adc-ntc.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * NTC Thermistor attached to Samsung ADC Controller driver information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __PLAT_ADC_NTC_H
+#define __PLAT_ADC_NTC_H __FILE__
+
+extern void s3c_adc_ntc_init(int port);
+extern int read_s3c_adc_ntc(int *mC);
+
+#endif /* __PLAT_ADC_NTC_H */
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
