Add platform data for CIF camera sensor and FIMC platform data
entries for it. Add platform device for s5p-fimc media device
driver and the camera port A I/O pins initialization.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/mach-goni.c | 52 +++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 37b5a97..43d6dd8 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -98,6 +98,7 @@ config MACH_GONI
select S5PV210_SETUP_I2C2
select S5PV210_SETUP_KEYPAD
select S5PV210_SETUP_SDHCI
+ select S5PV210_SETUP_FIMC
help
Machine support for Samsung GONI board
S5PC110(MCP) is one of package option of S5PV210
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 31d5aa7..78de63b 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -47,6 +47,10 @@
#include <plat/sdhci.h>
#include <plat/clock.h>
#include <plat/s5p-time.h>
+#include <plat/camport.h>
+
+#include <media/s5p_fimc.h>
+#include <media/noon010pc30.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -271,6 +275,14 @@ static void __init goni_tsp_init(void)
i2c2_devs[0].irq = gpio_to_irq(gpio);
}
+static void goni_camera_init(void)
+{
+ s5pv210_fimc_setup_gpio(S5P_CAMPORT_A);
+
+ /* Set max driver strength on CAM_A_CLKOUT pin. */
+ s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4);
+}
+
/* MAX8998 regulators */
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
@@ -800,6 +812,39 @@ static void goni_setup_sdhci(void)
s3c_sdhci2_set_platdata(&goni_hsmmc2_data);
};
+struct platform_device s5p_device_fimc_md = {
+ .name = "s5p-fimc-md",
+ .id = -1,
+};
+
+static struct noon010pc30_platform_data noon010pc30_pldata = {
+ .clk_rate = 16000000UL,
+ .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */
+ .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */
+};
+
+static struct i2c_board_info noon010pc30_board_info = {
+ I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1),
+ .platform_data = &noon010pc30_pldata,
+};
+
+
+static struct s5p_fimc_isp_info goni_camera_sensors[] = {
+ {
+ .mux_id = 0,
+ .flags = FIMC_CLK_INV_PCLK | FIMC_CLK_INV_VSYNC,
+ .bus_type = FIMC_ITU_601,
+ .board_info = &noon010pc30_board_info,
+ .i2c_bus_num = 0,
+ .clk_frequency = 16000000UL,
+ },
+};
+
+struct s5p_platform_fimc goni_fimc_md_platdata __initdata = {
+ .isp_info = goni_camera_sensors,
+ .num_clients = ARRAY_SIZE(goni_camera_sensors),
+};
+
static struct platform_device *goni_devices[] __initdata = {
&s3c_device_fb,
&s5p_device_onenand,
@@ -812,6 +857,7 @@ static struct platform_device *goni_devices[] __initdata = {
&s5p_device_fimc0,
&s5p_device_fimc1,
&s5p_device_fimc2,
+ &s5p_device_fimc_md,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_hsmmc2,
@@ -875,6 +921,12 @@ static void __init goni_machine_init(void)
/* FB */
s3c_fb_set_platdata(&goni_lcd_pdata);
+ /* FIMC */
+ s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata),
+ &s5p_device_fimc_md);
+
+ goni_camera_init();
+
/* SPI */
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
