Hello,
On Wednesday, June 22, 2011 8:42 AM Jingoo Han wrote:
> From: Jonghun Han <jonghun.han@xxxxxxxxxxx>
>
> This patch adds support EXYNOS4 FIMD0 and LTE480WV LCD pannel.
>
> Signed-off-by: Jonghun Han <jonghun.han@xxxxxxxxxxx>
> Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> ---
> arch/arm/mach-exynos4/mach-smdkc210.c | 114
> +++++++++++++++++++++++++++++++++
> arch/arm/mach-exynos4/mach-smdkv310.c | 114
> +++++++++++++++++++++++++++++++++
> 2 files changed, 228 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-
> exynos4/mach-smdkc210.c
> index e645f7a..360a50a 100644
> --- a/arch/arm/mach-exynos4/mach-smdkc210.c
> +++ b/arch/arm/mach-exynos4/mach-smdkc210.c
> @@ -9,26 +9,33 @@
> */
>
> #include <linux/serial_core.h>
> +#include <linux/delay.h>
> #include <linux/gpio.h>
> +#include <linux/lcd.h>
> #include <linux/mmc/host.h>
> #include <linux/platform_device.h>
> #include <linux/smsc911x.h>
> #include <linux/io.h>
> #include <linux/i2c.h>
> +#include <linux/clk.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach-types.h>
>
> +#include <video/platform_lcd.h>
> +
> #include <plat/regs-serial.h>
> #include <plat/regs-srom.h>
> #include <plat/exynos4.h>
> #include <plat/cpu.h>
> #include <plat/devs.h>
> +#include <plat/fb.h>
> #include <plat/sdhci.h>
> #include <plat/iic.h>
> #include <plat/pd.h>
>
> #include <mach/map.h>
> +#include <mach/regs-fb.h>
>
> /* Following are default values for UCON, ULCON and UFCON UART registers
> */
> #define SMDKC210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> @@ -111,6 +118,69 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata
> __initdata = {
> .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
> };
>
> +static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
> + unsigned int power)
> +{
> + if (power) {
> +#if !defined(CONFIG_BACKLIGHT_PWM)
> + gpio_request(EXYNOS4_GPD0(1), "GPD0");
> + gpio_direction_output(EXYNOS4_GPD0(1), 1);
> + gpio_free(EXYNOS4_GPD0(1));
> +#endif
> + /* fire nRESET on power up */
> + gpio_request(EXYNOS4_GPX0(6), "GPX0");
> +
> + gpio_direction_output(EXYNOS4_GPX0(6), 1);
> + mdelay(100);
> +
> + gpio_set_value(EXYNOS4_GPX0(6), 0);
> + mdelay(10);
> +
> + gpio_set_value(EXYNOS4_GPX0(6), 1);
> + mdelay(10);
> +
> + gpio_free(EXYNOS4_GPX0(6));
> + } else {
> +#if !defined(CONFIG_BACKLIGHT_PWM)
> + gpio_request(EXYNOS4_GPD0(1), "GPD0");
> + gpio_direction_output(EXYNOS4_GPD0(1), 0);
> + gpio_free(EXYNOS4_GPD0(1));
> +#endif
> + }
> +}
> +
> +static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
> + .set_power = lcd_lte480wv_set_power,
> +};
> +
> +static struct platform_device smdkc210_lcd_lte480wv = {
> + .name = "platform-lcd",
> + .dev.parent = &s5p_device_fimd0.dev,
> + .dev.platform_data = &smdkc210_lcd_lte480wv_data,
> +};
> +
> +static struct s3c_fb_pd_win smdkc210_fb_win0 = {
> + .win_mode = {
> + .left_margin = 13,
> + .right_margin = 8,
> + .upper_margin = 7,
> + .lower_margin = 5,
> + .hsync_len = 3,
> + .vsync_len = 1,
> + .xres = 800,
> + .yres = 480,
> + },
> + .max_bpp = 32,
> + .default_bpp = 24,
> +};
> +
> +static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
> + .win[0] = &smdkc210_fb_win0,
> + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
> + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
> + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
> +};
> +
> static struct resource smdkc210_smsc911x_resources[] = {
> [0] = {
> .start = EXYNOS4_PA_SROM_BANK(1),
> @@ -165,6 +235,8 @@ static struct platform_device *smdkc210_devices[]
> __initdata = {
> &exynos4_device_pd[PD_GPS],
> &exynos4_device_sysmmu,
> &samsung_asoc_dma,
> + &s5p_device_fimd0,
> + &smdkc210_lcd_lte480wv,
> &smdkc210_smsc911x,
> };
>
> @@ -191,6 +263,44 @@ static void __init smdkc210_smsc911x_init(void)
> (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
> }
>
> +static int __init smdkc210_fimd0_setup_clock(void)
> +{
> + struct clk *sclk = NULL;
> + struct clk *mout_mpll = NULL;
> +
> + u32 rate = 0;
> +
> + sclk = clk_get(&s5p_device_fimd0.dev, "sclk_fimd");
> + if (IS_ERR(sclk)) {
> + printk(KERN_ERR "failed to get sclk for fimd\n");
> + goto err_clk2;
> + }
> +
> + mout_mpll = clk_get(NULL, "mout_mpll");
> + if (IS_ERR(mout_mpll)) {
> + printk(KERN_ERR "failed to get mout_mpll\n");
> + goto err_clk1;
> + }
> +
> + clk_set_parent(sclk, mout_mpll);
> + if (!rate)
> + rate = 134000000;
> +
> + clk_set_rate(sclk, rate);
> +
> + clk_put(sclk);
> + clk_put(mout_mpll);
> +
> + return 0;
> +
> +err_clk1:
> + clk_put(mout_mpll);
> +err_clk2:
> + clk_put(sclk);
> +
> + return -EINVAL;
> +}
> +
I'm not sure if mach-smdk*.c is the right place for the above code.
IMHO all the code that configures very low level, board specific parameters
(like clocks and their relations) should be performed in boot loarder.
(snipped)
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
