Re: [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jun 21, 2011 at 4:03 PM,  <p.paneri@xxxxxxxxxxx> wrote:
> From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
>
> A generic method to initialize and exit OTG PHY which can be
> used for all the samsung SoCs.
> OTG platdata structure added in platform to pass required
> platform specific functions and data to the driver.
>
> Signed-off-by: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> ---
>  arch/arm/mach-s5p64x0/Makefile           |    1 +
>  arch/arm/mach-s5p64x0/include/mach/map.h |    4 +
>  arch/arm/mach-s5p64x0/setup-otg-phy.c    |   89 ++++++++++++++++++++++++++++++
>  arch/arm/plat-s5p/include/plat/otg.h     |   29 ++++++++++
>  4 files changed, 123 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-s5p64x0/setup-otg-phy.c
>  create mode 100644 arch/arm/plat-s5p/include/plat/otg.h
>
> diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
> index ae6bf6f..611fb3a 100644
> --- a/arch/arm/mach-s5p64x0/Makefile
> +++ b/arch/arm/mach-s5p64x0/Makefile
> @@ -28,3 +28,4 @@ obj-y                         += dev-audio.o
>  obj-$(CONFIG_S3C64XX_DEV_SPI)  += dev-spi.o
>
>  obj-$(CONFIG_S5P64X0_SETUP_I2C1)       += setup-i2c1.o
> +obj-$(CONFIG_S3C_DEV_DWC_OTG)  += setup-otg-phy.o
> diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
> index 95c9125..717c279 100644
> --- a/arch/arm/mach-s5p64x0/include/mach/map.h
> +++ b/arch/arm/mach-s5p64x0/include/mach/map.h
> @@ -44,6 +44,8 @@
>  #define S5P64X0_PA_SPI1                0xEC500000
>
>  #define S5P64X0_PA_HSOTG       0xED100000
> +#define S5P64X0_PA_USB_HSPHY   0xED200000
> +#define S5P64X0_VA_USB_HSPHY   S3C_ADDR_CPU(0x00100000)
>
>  #define S5P64X0_PA_HSMMC(x)    (0xED800000 + ((x) * 0x100000))
>
> @@ -71,6 +73,8 @@
>  #define S5P_PA_TIMER           S5P64X0_PA_TIMER
>
>  #define SAMSUNG_PA_ADC         S5P64X0_PA_ADC
> +#define S3C_PA_USB_HSOTG       S5P64X0_PA_HSOTG
> +#define S3C_VA_USB_HSPHY        S5P64X0_VA_USB_HSPHY
>
>  /* UART */
>
> diff --git a/arch/arm/mach-s5p64x0/setup-otg-phy.c b/arch/arm/mach-s5p64x0/setup-otg-phy.c
> new file mode 100644
> index 0000000..c351554
> --- /dev/null
> +++ b/arch/arm/mach-s5p64x0/setup-otg-phy.c
> @@ -0,0 +1,89 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics Co.Ltd
> + * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> + * based on arch/arm/mach-exynos4/setup-usb-phy.c
> + * written by Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/platform_device.h>
> +#include <mach/regs-clock.h>
> +#include <mach/gpio.h>
> +#include <plat/regs-usb-hsotg-phy.h>
> +#include <plat/usb-phy.h>
> +
> +struct clk *otg_clk;
> +static int s5p64x0_otg_phy_init(struct platform_device *pdev)
> +{
> +       int err;
> +
> +       otg_clk = clk_get(&pdev->dev, "otg");
> +       if (IS_ERR(otg_clk)) {
> +               dev_err(&pdev->dev, "Failed to get otg clock\n");
> +               return PTR_ERR(otg_clk);
> +       }
> +
> +       err = clk_enable(otg_clk);
> +       if (err) {
> +               clk_put(otg_clk);
> +               return err;
> +       }
> +
> +       if (gpio_is_valid(S5P6440_GPN(1))) {
> +               err = gpio_request(S5P6440_GPN(1), "GPN");
> +               if (err)
> +                       printk(KERN_ERR "failed to request GPN1\n");
> +               gpio_direction_output(S5P6440_GPN(1), 1);
> +       }

What's the GPN(1)? I think it's board specific pins. so please replace
it at board file.
> +
> +       writel(readl(S5P64X0_OTHERS)&~S5P64X0_OTHERS_USB_SIG_MASK,
> +                                                       S5P64X0_OTHERS);
> +       writel(0x0, S3C_PHYPWR);         /* Power up */
> +       writel(S3C_PHYCLK_CLKSEL_12M, S3C_PHYCLK);
> +       writel(S3C_RSTCON_PHY, S3C_RSTCON);
> +
> +       udelay(50);
> +       writel(0x0, S3C_RSTCON);
> +       udelay(50);
> +
> +       return 0;
> +}
> +
> +static int s5p64x0_otg_phy_exit(struct platform_device *pdev)
> +{
> +       writel(readl(S3C_PHYPWR)|(0x1F<<1), S3C_PHYPWR);
> +       writel(readl(S5P64X0_OTHERS)&~S5P64X0_OTHERS_USB_SIG_MASK,
> +                                                       S5P64X0_OTHERS);
> +
> +       gpio_free(S5P6440_GPN(1));
ditto
> +
> +       clk_disable(otg_clk);
> +       clk_put(otg_clk);
> +
> +       return 0;
> +}
> +
> +int s5p_usb_phy_init(struct platform_device *pdev, int type)
> +{
> +       if (type == S5P_USB_PHY_DEVICE)
> +               return s5p64x0_otg_phy_init(pdev);
> +
> +       return -EINVAL;
> +}
> +
> +int s5p_usb_phy_exit(struct platform_device *pdev, int type)
> +{
> +       if (type == S5P_USB_PHY_DEVICE)
> +               return s5p64x0_otg_phy_exit(pdev);
> +
> +       return -EINVAL;
> +}
> diff --git a/arch/arm/plat-s5p/include/plat/otg.h b/arch/arm/plat-s5p/include/plat/otg.h
> new file mode 100644
> index 0000000..3111dcc
> --- /dev/null
> +++ b/arch/arm/plat-s5p/include/plat/otg.h
> @@ -0,0 +1,29 @@
> +/*
> + * Copyright (C) 2011 Samsung Electronics Co.Ltd
> + * Author: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> + * based on arch/arm/plat-s5p/include/plat/usb-phy.h
> + * written by Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute  it and/or modify it
> + * under  the terms of  the GNU General  Public License as published by the
> + * Free Software Foundation;  either version 2 of the  License, or (at your
> + * option) any later version.
> + */
> +
> +#ifndef __PLAT_S5P_OTG_H
> +#define __PLAT_S5P_OTG_H
> +
> +struct s5p_otg_platdata {
> +       int (*phy_init)(struct platform_device *pdev, int type);
> +       int (*phy_exit)(struct platform_device *pdev, int type);
> +       u32 dev_rx_fifo_size;
> +       u32 dev_nptx_fifo_size;
> +       u32 host_rx_fifo_size;
> +       u32 host_nptx_fifo_size;
> +       u32 host_ch_num;
> +
> +};
> +
> +extern void s5p_otg_set_platdata(struct s5p_otg_platdata *pd);
> +
> +#endif /* __PLAT_S5P_OTG_H */
> --
> 1.7.0.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux