Thomas Abraham wrote:
>
> On SMDKV310 board, a card detect gpio pin is available that is directly
> connected to the io pad of the sdhci controller. Fix incorrect value
> of cd_type field in platform data for sdhci instance 0 and 2.
>
> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> ---
> arch/arm/mach-exynos4/mach-smdkv310.c | 8 ++------
> 1 files changed, 2 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-
> exynos4/mach-smdkv310.c
> index 1526764..edd8141 100644
> --- a/arch/arm/mach-exynos4/mach-smdkv310.c
> +++ b/arch/arm/mach-exynos4/mach-smdkv310.c
> @@ -78,9 +78,7 @@ static struct s3c2410_uartcfg smdkv310_uartcfgs[]
__initdata
> = {
> };
>
> static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
> - .cd_type = S3C_SDHCI_CD_GPIO,
> - .ext_cd_gpio = EXYNOS4_GPK0(2),
> - .ext_cd_gpio_invert = 1,
> + .cd_type = S3C_SDHCI_CD_INTERNAL,
> .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
> #ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
> .max_width = 8,
> @@ -96,9 +94,7 @@ static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata
> __initdata = {
> };
>
> static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
> - .cd_type = S3C_SDHCI_CD_GPIO,
> - .ext_cd_gpio = EXYNOS4_GPK2(2),
> - .ext_cd_gpio_invert = 1,
> + .cd_type = S3C_SDHCI_CD_INTERNAL,
> .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
> #ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
> .max_width = 8,
> --
Applied, thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
