On 06/06/11 23:45, Marek Szyprowski wrote:
s5p_timer requires PWM device to be compiled in. Add aproperiate Kconfig
select directive for GONI machine, so compilation won't fail if GONI is
the only machine compiled into the kernel.
Signed-off-by: Marek Szyprowski<m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park<kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 37b5a97..aceafb4 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -92,6 +92,7 @@ config MACH_GONI
select S3C_DEV_I2C2
select S3C_DEV_USB_HSOTG
select S5P_DEV_ONENAND
+ select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_KEYPAD
select S5PV210_SETUP_FB_24BPP
select S5PV210_SETUP_I2C1
Yeah, SAMSUNG_DEV_PWM is required to use s5p-time.c for HRT.
So I think following is better.
Marek, if you don't mind, I'd like to apply below...
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index e98f5c5..7f9ff2a 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -39,6 +39,7 @@ config S5P_GPIO_INT
config S5P_HRT
bool
+ select SAMSUNG_DEV_PWM
help
Use the High Resolution timer support
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
