According to removing ARCH_S5PC100, we don't need to support pata for S5PC100. Cc: Jeff Garzik <jgarzik@xxxxxxxxx> Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> --- drivers/ata/pata_samsung_cf.c | 13 ------------- 1 files changed, 0 insertions(+), 13 deletions(-) diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c index c446ae6..5c35f21 100644 --- a/drivers/ata/pata_samsung_cf.c +++ b/drivers/ata/pata_samsung_cf.c @@ -31,7 +31,6 @@ enum s3c_cpu_type { TYPE_S3C64XX, - TYPE_S5PC100, TYPE_S5PV210, }; @@ -453,10 +452,6 @@ static void pata_s3c_hwinit(struct s3c_ide_info *info, writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK); break; - case TYPE_S5PC100: - pata_s3c_cfg_mode(info->sfr_addr); - /* FALLTHROUGH */ - case TYPE_S5PV210: /* Configure as little endian */ pata_s3c_set_endian(info->ide_addr, 0); @@ -538,11 +533,6 @@ static int __init pata_s3c_probe(struct platform_device *pdev) info->sfr_addr = info->ide_addr + 0x1800; info->ide_addr += 0x1900; info->fifo_status_reg = 0x94; - } else if (cpu_type == TYPE_S5PC100) { - ap->ops = &pata_s5p_port_ops; - info->sfr_addr = info->ide_addr + 0x1800; - info->ide_addr += 0x1900; - info->fifo_status_reg = 0x84; } else { ap->ops = &pata_s5p_port_ops; info->fifo_status_reg = 0x84; @@ -640,9 +630,6 @@ static struct platform_device_id pata_s3c_driver_ids[] = { .name = "s3c64xx-pata", .driver_data = TYPE_S3C64XX, }, { - .name = "s5pc100-pata", - .driver_data = TYPE_S5PC100, - }, { .name = "s5pv210-pata", .driver_data = TYPE_S5PV210, }, -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html