The gpio-bank-X header files of S3C64XX have defines which can be
substituted by more common API, so they can be removed. This is compile
tested only.
Signed-off-by: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
arch/arm/mach-s3c64xx/dev-spi.c | 20 ++----
arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h | 48 --------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h | 60 -----------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h | 53 ---------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h | 49 --------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h | 44 -------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h | 71 ---------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h | 42 ------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h | 74 ----------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h | 40 ------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h | 36 -----------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h | 54 ----------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h | 70 --------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h | 69 --------------------
arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h | 46 -------------
arch/arm/mach-s3c64xx/mach-smdk6410.c | 1 -
arch/arm/mach-s3c64xx/pm.c | 34 ++++++-----
arch/arm/mach-s3c64xx/setup-i2c0.c | 7 +--
arch/arm/mach-s3c64xx/setup-i2c1.c | 7 +--
arch/arm/mach-s3c64xx/sleep.S | 8 ++-
20 files changed, 37 insertions(+), 796 deletions(-)
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
delete mode 100644 arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
index 405e621..82db072 100644
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ b/arch/arm/mach-s3c64xx/dev-spi.c
@@ -16,7 +16,6 @@
#include <mach/dma.h>
#include <mach/map.h>
-#include <mach/gpio-bank-c.h>
#include <mach/spi-clocks.h>
#include <mach/irqs.h>
@@ -40,23 +39,15 @@ static char *spi_src_clks[] = {
*/
static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
{
+ unsigned int base;
+
switch (pdev->id) {
case 0:
- s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0);
- s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO);
- s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO);
- s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP);
+ base = S3C64XX_GPC(0);
break;
case 1:
- s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1);
- s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1);
- s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1);
- s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP);
+ base = S3C64XX_GPC(4);
break;
default:
@@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
return -EINVAL;
}
+ s3c_gpio_cfgall_range(base, 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+
return 0;
}
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
deleted file mode 100644
index 34212e1..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank A register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00)
-#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04)
-#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08)
-#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c)
-#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10)
-
-#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0)
-#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0)
-
-#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4)
-#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4)
-
-#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8)
-#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8)
-
-#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12)
-#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12)
-
-#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16)
-#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16)
-
-#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20)
-#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20)
-
-#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24)
-#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24)
-
-#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28)
-#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
deleted file mode 100644
index 7232c03..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank B register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00)
-#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04)
-#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08)
-#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c)
-#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10)
-
-#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0)
-#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0)
-#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0)
-#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0)
-#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0)
-
-#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4)
-#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4)
-#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4)
-#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4)
-#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4)
-
-#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8)
-#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8)
-#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8)
-#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8)
-#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8)
-#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8)
-
-#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12)
-#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12)
-#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12)
-#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12)
-#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12)
-
-#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16)
-#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16)
-#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16)
-#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16)
-
-#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20)
-#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20)
-
-#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24)
-#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
deleted file mode 100644
index db189ab..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank C register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00)
-#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04)
-#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08)
-#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c)
-#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10)
-
-#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0)
-#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0)
-
-#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4)
-#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4)
-
-#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8)
-#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8)
-
-#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12)
-#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12)
-
-#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16)
-#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16)
-#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16)
-#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16)
-
-#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20)
-#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20)
-#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20)
-#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20)
-
-#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24)
-#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24)
-
-#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28)
-#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28)
-#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
deleted file mode 100644
index 1a01cee..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank D register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00)
-#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04)
-#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08)
-#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c)
-#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10)
-
-#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0)
-#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0)
-#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0)
-#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0)
-
-#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4)
-#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4)
-#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4)
-#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4)
-
-#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8)
-#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8)
-#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8)
-#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8)
-
-#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12)
-#define S3C64XX_GPD3_I2S0_DI (0x03 << 12)
-#define S3C64XX_GPD3_AC97_SDI (0x04 << 12)
-#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12)
-
-#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16)
-#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16)
-#define S3C64XX_GPD4_AC97_SDO (0x04 << 16)
-#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
deleted file mode 100644
index f057adb..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank E register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00)
-#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04)
-#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08)
-#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c)
-#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10)
-
-#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0)
-#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0)
-#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0)
-
-#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4)
-#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4)
-#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4)
-
-#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8)
-#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8)
-#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8)
-
-#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12)
-#define S3C64XX_GPE3_I2S1_DI (0x03 << 12)
-#define S3C64XX_GPE3_AC97_SDI (0x04 << 12)
-
-#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16)
-#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16)
-#define S3C64XX_GPE4_AC97_SDO (0x04 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
deleted file mode 100644
index 62ab8f5..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank F register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00)
-#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04)
-#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08)
-#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c)
-#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10)
-
-#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0)
-#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0)
-
-#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2)
-#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2)
-
-#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4)
-#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4)
-
-#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6)
-#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6)
-
-#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8)
-#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8)
-
-#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10)
-#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10)
-
-#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12)
-#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12)
-
-#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14)
-#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14)
-
-#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16)
-#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16)
-
-#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18)
-#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18)
-
-#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20)
-#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20)
-
-#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22)
-#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22)
-
-#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24)
-#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24)
-
-#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26)
-#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26)
-
-#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28)
-#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28)
-
-#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
deleted file mode 100644
index b94954a..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank G register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00)
-#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04)
-#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08)
-#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c)
-#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10)
-
-#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0)
-#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0)
-
-#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4)
-#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4)
-
-#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8)
-#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8)
-
-#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12)
-#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12)
-
-#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16)
-#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16)
-
-#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20)
-#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
deleted file mode 100644
index 5d75aaa..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank H register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00)
-#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04)
-#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08)
-#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c)
-#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10)
-#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14)
-
-#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4))
-#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4))
-#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4))
-
-#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0)
-#define S3C64XX_GPH0_KP_COL0 (0x04 << 0)
-#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0)
-
-#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4)
-#define S3C64XX_GPH1_KP_COL1 (0x04 << 4)
-#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4)
-
-#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8)
-#define S3C64XX_GPH2_KP_COL2 (0x04 << 8)
-#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8)
-
-#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12)
-#define S3C64XX_GPH3_KP_COL3 (0x04 << 12)
-#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12)
-
-#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16)
-#define S3C64XX_GPH4_KP_COL4 (0x04 << 16)
-#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16)
-
-#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20)
-#define S3C64XX_GPH5_KP_COL5 (0x04 << 20)
-#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20)
-
-#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24)
-#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24)
-#define S3C64XX_GPH6_KP_COL6 (0x04 << 24)
-#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24)
-#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24)
-#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24)
-
-#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28)
-#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28)
-#define S3C64XX_GPH7_KP_COL7 (0x04 << 28)
-#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28)
-#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
-#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
-
-#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
-#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
-#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
-#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
-#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
-
-#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
-#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
-#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
-#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
-#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
deleted file mode 100644
index 4ceaa60..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank I register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00)
-#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04)
-#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08)
-#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c)
-#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10)
-
-#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPI0_VD0 (0x02 << 0)
-#define S3C64XX_GPI1_VD1 (0x02 << 2)
-#define S3C64XX_GPI2_VD2 (0x02 << 4)
-#define S3C64XX_GPI3_VD3 (0x02 << 6)
-#define S3C64XX_GPI4_VD4 (0x02 << 8)
-#define S3C64XX_GPI5_VD5 (0x02 << 10)
-#define S3C64XX_GPI6_VD6 (0x02 << 12)
-#define S3C64XX_GPI7_VD7 (0x02 << 14)
-#define S3C64XX_GPI8_VD8 (0x02 << 16)
-#define S3C64XX_GPI9_VD9 (0x02 << 18)
-#define S3C64XX_GPI10_VD10 (0x02 << 20)
-#define S3C64XX_GPI11_VD11 (0x02 << 22)
-#define S3C64XX_GPI12_VD12 (0x02 << 24)
-#define S3C64XX_GPI13_VD13 (0x02 << 26)
-#define S3C64XX_GPI14_VD14 (0x02 << 28)
-#define S3C64XX_GPI15_VD15 (0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
deleted file mode 100644
index 6f25cd0..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank J register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00)
-#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04)
-#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08)
-#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c)
-#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10)
-
-#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPJ0_VD16 (0x02 << 0)
-#define S3C64XX_GPJ1_VD17 (0x02 << 2)
-#define S3C64XX_GPJ2_VD18 (0x02 << 4)
-#define S3C64XX_GPJ3_VD19 (0x02 << 6)
-#define S3C64XX_GPJ4_VD20 (0x02 << 8)
-#define S3C64XX_GPJ5_VD21 (0x02 << 10)
-#define S3C64XX_GPJ6_VD22 (0x02 << 12)
-#define S3C64XX_GPJ7_VD23 (0x02 << 14)
-#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16)
-#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18)
-#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20)
-#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
deleted file mode 100644
index d0aeda1..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank N register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
-#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
-#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08)
-
-#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPN0_EINT0 (0x02 << 0)
-#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0)
-
-#define S3C64XX_GPN1_EINT1 (0x02 << 2)
-#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2)
-
-#define S3C64XX_GPN2_EINT2 (0x02 << 4)
-#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4)
-
-#define S3C64XX_GPN3_EINT3 (0x02 << 6)
-#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6)
-
-#define S3C64XX_GPN4_EINT4 (0x02 << 8)
-#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8)
-
-#define S3C64XX_GPN5_EINT5 (0x02 << 10)
-#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10)
-
-#define S3C64XX_GPN6_EINT6 (0x02 << 12)
-#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12)
-
-#define S3C64XX_GPN7_EINT7 (0x02 << 14)
-#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14)
-
-#define S3C64XX_GPN8_EINT8 (0x02 << 16)
-#define S3C64XX_GPN9_EINT9 (0x02 << 18)
-#define S3C64XX_GPN10_EINT10 (0x02 << 20)
-#define S3C64XX_GPN11_EINT11 (0x02 << 22)
-#define S3C64XX_GPN12_EINT12 (0x02 << 24)
-#define S3C64XX_GPN13_EINT13 (0x02 << 26)
-#define S3C64XX_GPN14_EINT14 (0x02 << 28)
-#define S3C64XX_GPN15_EINT15 (0x02 << 30)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
deleted file mode 100644
index 21868fa..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank O register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00)
-#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04)
-#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08)
-#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c)
-#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10)
-
-#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0)
-#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0)
-
-#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2)
-#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2)
-
-#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4)
-#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4)
-
-#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6)
-#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6)
-
-#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8)
-
-#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10)
-
-#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12)
-#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12)
-
-#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14)
-#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14)
-
-#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16)
-#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16)
-
-#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18)
-#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18)
-
-#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20)
-#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20)
-
-#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22)
-#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22)
-
-#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24)
-#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24)
-
-#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26)
-#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26)
-
-#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28)
-#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28)
-
-#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30)
-#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
deleted file mode 100644
index 46bcfb6..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank P register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00)
-#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04)
-#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08)
-#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c)
-#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10)
-
-#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0)
-#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0)
-
-#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2)
-#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2)
-
-#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4)
-#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4)
-
-#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6)
-#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6)
-
-#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8)
-#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8)
-
-#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10)
-#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10)
-
-#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12)
-#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12)
-
-#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14)
-#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14)
-
-#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16)
-#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16)
-
-#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18)
-#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18)
-
-#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20)
-#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20)
-
-#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22)
-#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22)
-
-#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24)
-#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24)
-
-#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26)
-#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26)
-
-#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28)
-#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28)
-
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
deleted file mode 100644
index 1712223..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@xxxxxxxxxxxx>
- * http://armlinux.simtec.co.uk/
- *
- * GPIO Bank Q register and configuration definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00)
-#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04)
-#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08)
-#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c)
-#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10)
-
-#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
-#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2))
-#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
-
-#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0)
-#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0)
-
-#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2)
-#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2)
-
-#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4)
-
-#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6)
-
-#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8)
-
-#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10)
-
-#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12)
-
-#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14)
-#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14)
-
-#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16)
-#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16)
-
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 686a4f2..2c0353a 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -50,7 +50,6 @@
#include <mach/hardware.h>
#include <mach/regs-fb.h>
#include <mach/map.h>
-#include <mach/gpio-bank-f.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index 79412f7..bc1c470 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -30,26 +30,18 @@
#include <mach/regs-gpio-memport.h>
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
-#include <mach/gpio-bank-n.h>
-
void s3c_pm_debug_smdkled(u32 set, u32 clear)
{
unsigned long flags;
- u32 reg;
+ int i;
local_irq_save(flags);
- reg = __raw_readl(S3C64XX_GPNCON);
- reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
- S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
- reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
- S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
- __raw_writel(reg, S3C64XX_GPNCON);
-
- reg = __raw_readl(S3C64XX_GPNDAT);
- reg &= ~(clear << 12);
- reg |= set << 12;
- __raw_writel(reg, S3C64XX_GPNDAT);
-
+ for (i = 0; i < 4; i++) {
+ if (clear & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 0);
+ if (set & (1 << i))
+ gpio_set_value(S3C64XX_GPN(12 + i), 1);
+ }
local_irq_restore(flags);
}
#endif
@@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void)
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+ gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");
+ gpio_request(S3C64XX_GPN(13), "DEBUG_LED1");
+ gpio_request(S3C64XX_GPN(14), "DEBUG_LED2");
+ gpio_request(S3C64XX_GPN(15), "DEBUG_LED3");
+ gpio_direction_output(S3C64XX_GPN(12), 0);
+ gpio_direction_output(S3C64XX_GPN(13), 0);
+ gpio_direction_output(S3C64XX_GPN(14), 0);
+ gpio_direction_output(S3C64XX_GPN(15), 0);
+#endif
+
return 0;
}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c
index 406192a..241af94 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c0.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c0.c
@@ -18,14 +18,11 @@
struct platform_device; /* don't need the contents */
-#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0);
- s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0);
- s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c
index 1ee62c9..3d13a96 100644
--- a/arch/arm/mach-s3c64xx/setup-i2c1.c
+++ b/arch/arm/mach-s3c64xx/setup-i2c1.c
@@ -18,14 +18,11 @@
struct platform_device; /* don't need the contents */
-#include <mach/gpio-bank-b.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
void s3c_i2c1_cfg_gpio(struct platform_device *dev)
{
- s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1);
- s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1);
- s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP);
- s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2,
+ S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP);
}
diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index afe5a76..1f87732 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -20,7 +20,6 @@
#define S3C64XX_VA_GPIO (0x0)
#include <mach/regs-gpio.h>
-#include <mach/gpio-bank-n.h>
#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
@@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume)
ldr r2, =LL_UART /* for debug */
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+
+#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00)
+#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04)
+
+#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2))
+#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2))
+
/* Initialise the GPIO state if we are debugging via the SMDK LEDs,
* as the uboot version supplied resets these to inputs during the
* resume checks.
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
