RE: [PATCH 2/7] ARM: Samsung: update/rewrite Samsung SYSMMU (IOMMU) driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello,

On Thursday, April 21, 2011 2:00 PM Arnd Bergmann wrote:

> On Thursday 21 April 2011, Marek Szyprowski wrote:
> > On Wednesday, April 20, 2011 6:07 PM Arnd Bergmann wrote:
> > > On Wednesday 20 April 2011, Marek Szyprowski wrote:
> > > > The only question is how a device can allocate a buffer that will be
> most
> > > > convenient for IOMMU mapping (i.e. will require least entries to
> map)?
> > > >
> > > > IOMMU can create a contiguous mapping for ANY set of pages, but it
> performs
> > > > much better if the pages are grouped into 64KiB or 1MiB areas.
> > > >
> > > > Can device allocate a buffer without mapping it into kernel space?
> > >
> > > Not today as far as I know. You can register coherent memory per device
> > > using dma_declare_coherent_memory(), which will be used to back
> > > dma_alloc_coherent(), but I believe it is always mapped right now.
> >
> > This is not exactly what I meant.
> >
> > As we have IOMMU, the device driver can access any system memory. However
> > the performance will be better if the buffer is composed of larger
> contiguous
> > parts (like 64KiB or 1MiB). I would like to avoid putting logic that
> manages
> > buffer allocation into the device drivers. It would be best if such
> buffers
> > could be allocated by a single call to dma-mapping API.
> >
> > Right now there is dma_alloc_coherent() function, which is used by the
> > drivers to allocate a contiguous block of memory and map it to DMA
> addresses.
> > With IOMMU implementation it is quite easy to provide a replacement for
> it
> > that will allocate some set of pages and map into device virtual address
> > space as a contiguous buffer.
> >
> > This will have the advantage that the same multimedia device driver
> > will work on both systems - Samsung S5PC110 (without IOMMU) and Exynos4
> > (with IOMMU).
> 
> Right.
> 
> > However dma_alloc_coherent() besides allocating memory also implies some
> > particular type of memory mapping for it. IMHO it might be a good idea to
> > separate these 2 things (allocation and mapping) somewhere in the future.
> >
> > On systems with IOMMU the dma_map_sg() can be also used to create a
> mapping
> > in device virtual address space, but the driver will still need to
> allocate
> > the memory by itself.
> 
> Note that dma_map_sg() is the "streaming mapping", which provides a
> cacheable
> buffer all the time, while dma_alloc_coherent() and is the "coherent
> mapping".

Ok. 

> There is also dma_alloc_noncoherent(), which you can use to allocate a
> buffer
> for the streaming mapping. This is currently not implemented on ARM, but if
> I understand you correctly, adding this would do what you want.

Ok, I got it. Implementing dma_alloc_noncoherent() as well as dma_map_sg()
for non-IOMMU cases also makes some sense and will simplify the drivers imho.

> > > Ok, I see. Having one device per channel as you suggested could
> probably
> > > work around this, and it's at least consistent with how you'd represent
> > > IOMMUs in the device tree. It is not ideal because it makes the video
> > > driver more complex when it now has to deal with multiple struct device
> > > that it binds to, but I can't think of any nicer way either.
> >
> > Well, this will definitely complicate the codec driver. I wonder if
> allowing
> > the driver to kmalloc(sizeof(struct device))) and copy the relevant data
> > from the 'proper' struct device will be better idea. It is still hack but
> > definitely less intrusive for the driver.
> 
> No, I think that would be much worse, it definitely destroys all kinds of
> assumptions that the core code makes about devices. However, I don't think
> it's much of a problem to just create two child devices and use them
> from the main driver, you don't really need to create a device_driver
> to bind to each of them.

I must have missed something. Video codec is a platform device and struct
device pointer is gathered from it (&pdev->dev). How can I define child
devices and attach them to the platform device?

Best regards
-- 
Marek Szyprowski
Samsung Poland R&D Center

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux