Kyungmin Park wrote:
>
> Hi,
>
> MCT is only possible from EVT1.0 or later. The current universal_c210
> used the EVT0 version.
> So can you remove the ifdef and board can select which timer is used?
> Please refer the omap implementation and how to use it.
>
Basically, "CONFIG_EXYNOS4_MCT" can be selected in kernel menuconfig.
It means default one is using local timer which is included in every
Exynos4210.
> If we use the same configuration, It will be boot failed at
> universal_c210 board.
>
No, see as above.
One more basically, each machine specific CONFIGs should be selected in
kernel menuconfig after "make exynos4_defconfig". Because each machine
supports different components on each one now.
As a note, however, I don't want to add each machine's defconfig. Maybe
Russell also.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> Thank you,
> Kyungmin Park
>
> On Mon, Feb 28, 2011 at 2:16 PM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote:
> > From: Changhwan Youn <chaos.youn@xxxxxxxxxxx>
> >
> > The Multi-Core Timer(MCT) of EXYNOS4 is designed for implementing
> > clock source timer and clock event timers. This patch implements
> > 1 clock source timer with 64 bit free running counter of MCT and
> > 2 clock event timers with two of 31-bit tick counters.
> >
> > Signed-off-by: Changhwan Youn <chaos.youn@xxxxxxxxxxx>
> > Cc: Ben Dooks <ben-linux@xxxxxxxxx>
> > Cc: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
> > Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
> > ---
> > Changes since v3:
> > - Re-worked based on exynos4
> > - Changed member of clock_evetn_device like following
> > struct mct_clock_event_device {
> > struct clock_event_device *evt;
> > ...
> > - Address comments from Russell King
> > Added static into "irqreturn_t exynos4_mct_comp_isr()"
> > Added .dev_id member into "struct irqaction mct_comp_event_irq"
> >
> > Changes since v2:
> > - Addressed comments from Russell King
> > Added mct_clock_event_device structure
> > - Removed suspend()/resume() which are not used now
> >
> > Changes since v1:
> > - Addressed comments from Russell King
> > (implemented global timer, used local timer and so on)
> > - Fixed small things
> >
> > arch/arm/Kconfig | 2 +-
> > arch/arm/mach-exynos4/Kconfig | 5 +
> > arch/arm/mach-exynos4/Makefile | 11 +-
> > arch/arm/mach-exynos4/include/mach/regs-mct.h | 52 +++
> > arch/arm/mach-exynos4/mct.c | 421
> +++++++++++++++++++++++++
> > 5 files changed, 488 insertions(+), 3 deletions(-)
> > create mode 100644 arch/arm/mach-exynos4/include/mach/regs-mct.h
> > create mode 100644 arch/arm/mach-exynos4/mct.c
> >
> > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> > index ec3bf98..b4db99b 100644
> > --- a/arch/arm/Kconfig
> > +++ b/arch/arm/Kconfig
> > @@ -1366,7 +1366,7 @@ config LOCAL_TIMERS
> > bool "Use local timer interrupts"
> > depends on SMP
> > default y
> > - select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
> > + select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
> > help
> > Enable support for local timers on SMP platforms, rather then
the
> > legacy IPI broadcast method. Local timers allows the system
> > diff --git a/arch/arm/mach-exynos4/Kconfig
b/arch/arm/mach-exynos4/Kconfig
> > index ad03840..77b5d93 100644
> > --- a/arch/arm/mach-exynos4/Kconfig
> > +++ b/arch/arm/mach-exynos4/Kconfig
> > @@ -15,6 +15,11 @@ config CPU_EXYNOS4210
> > help
> > Enable EXYNOS4210 CPU support
> >
> > +config EXYNOS4_MCT
> > + bool "Kernel timer support by MCT"
> > + help
> > + Use MCT (Multi Core Timer) as kernel timers
> > +
> > config EXYNOS4_DEV_PD
> > bool
> > help
> > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-
> exynos4/Makefile
> > index 0558235..de20b91 100644
> > --- a/arch/arm/mach-exynos4/Makefile
> > +++ b/arch/arm/mach-exynos4/Makefile
> > @@ -13,11 +13,18 @@ obj- :=
> > # Core support for EXYNOS4 system
> >
> > obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
> > -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o time.o gpiolib.o
irq-eint.o
> dma.o
> > +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o
dma.o
> > obj-$(CONFIG_CPU_FREQ) += cpufreq.o
> >
> > obj-$(CONFIG_SMP) += platsmp.o headsmp.o
> > -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
> > +
> > +ifeq ($(CONFIG_EXYNOS4_MCT),y)
> > +obj-y += mct.o
> > +else
> > +obj-y += time.o
> > +obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
> > +endif
> > +
> > obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
> >
> > # machine support
(snip)
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
