On Sat, Feb 26, 2011 at 11:45 AM, Sangbeom Kim <sbkim73@xxxxxxxxxxx> wrote: > This patch adds support HR-Timer(High Resolution Timer) and dynamic > tick system for S5P SoCs. There are many clock sources for HR-Timer > on S5P SoCs. The PWM timer, RTC, System Timer, and MCT can be used > for clock source. > This patch can only support PWM timer for clocksource of > S5P64x0 and S5PV210. > > Signed-off-by: Sangbeom Kim <sbkim73@xxxxxxxxxxx> > --- > arch/arm/plat-s5p/Makefile | 1 + > arch/arm/plat-s5p/include/plat/s5p-time.h | 37 +++ > arch/arm/plat-s5p/s5p-time.c | 395 +++++++++++++++++++++++++++++ > 3 files changed, 433 insertions(+), 0 deletions(-) > create mode 100644 arch/arm/plat-s5p/include/plat/s5p-time.h > create mode 100644 arch/arm/plat-s5p/s5p-time.c > > diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile > index 4bd5cf9..3b8cc2f 100644 > --- a/arch/arm/plat-s5p/Makefile > +++ b/arch/arm/plat-s5p/Makefile > @@ -22,6 +22,7 @@ obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o > obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o > obj-$(CONFIG_PM) += pm.o > obj-$(CONFIG_PM) += irq-pm.o > +obj-$(CONFIG_GENERIC_CLOCKEVENTS) += s5p-time.o > > # devices > > diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-s5p/include/plat/s5p-time.h > new file mode 100644 > index 0000000..e478f0c > --- /dev/null > +++ b/arch/arm/plat-s5p/include/plat/s5p-time.h > @@ -0,0 +1,37 @@ > +/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h > + * > + * Copyright 2011 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * Header file for s5p time support > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#ifndef __ASM_PLAT_S5P_TIME_H > +#define __ASM_PLAT_S5P_TIME_H __FILE__ > + > +/* S5P HR-Timer Clock mode */ > +enum s5p_timer_mode { > + S5P_PWM0, > + S5P_PWM1, > + S5P_PWM2, > + S5P_PWM3, > + S5P_PWM4, > +}; > + > +struct s5p_timer_source { > + unsigned int event_id; > + unsigned int source_id; > +}; > + > +#define TCNT_MAX 0xffffffff > +#define NON_PERIODIC 0 > +#define PERIODIC 1 > + > +extern void __init s5p_set_timer_source(enum s5p_timer_mode event, > + enum s5p_timer_mode source); > +extern struct sys_timer s5p_timer; > +#endif /* __ASM_PLAT_S5P_TIME_H */ > diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c > new file mode 100644 > index 0000000..4691728 > --- /dev/null > +++ b/arch/arm/plat-s5p/s5p-time.c > @@ -0,0 +1,395 @@ > +/* linux/arch/arm/plat-s5p/s5p-time.c > + * > + * Copyright (c) 2011 Samsung Electronics Co., Ltd. > + * http://www.samsung.com/ > + * > + * S5P - Common hr-timer support > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > +*/ > + > +#include <linux/sched.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/err.h> > +#include <linux/clk.h> > +#include <linux/clockchips.h> > +#include <linux/platform_device.h> > + > +#include <asm/smp_twd.h> > +#include <asm/mach/time.h> > +#include <asm/mach/arch.h> > +#include <asm/mach/map.h> > + > +#include <mach/map.h> > +#include <plat/regs-timer.h> > +#include <plat/s5p-time.h> > + > +static struct clk *tin_event; > +static struct clk *tin_source; > +static struct clk *tdiv_event; > +static struct clk *tdiv_source; > +static struct clk *timerclk; > +static struct s5p_timer_source timer_source; > +static unsigned long clock_count_per_tick; > +static void s5p_timer_resume(void); > + > +static void s5p_time_stop(enum s5p_timer_mode mode) > +{ > + unsigned long tcon; > + > + tcon = __raw_readl(S3C2410_TCON); > + > + switch (mode) { > + case S5P_PWM0: > + tcon &= ~S3C2410_TCON_T0START; > + break; > + > + case S5P_PWM1: > + tcon &= ~S3C2410_TCON_T1START; > + break; > + > + case S5P_PWM2: > + tcon &= ~S3C2410_TCON_T2START; > + break; > + > + case S5P_PWM3: > + tcon &= ~S3C2410_TCON_T3START; > + break; > + > + case S5P_PWM4: > + tcon &= ~S3C2410_TCON_T4START; > + break; > + > + default: > + printk(KERN_ERR "Invalid Timer %d\n", mode); > + break; > + } > + __raw_writel(tcon, S3C2410_TCON); > +} > + > +static void s5p_time_setup(enum s5p_timer_mode mode, unsigned long tcnt) > +{ > + unsigned long tcon; > + > + tcon = __raw_readl(S3C2410_TCON); > + > + tcnt--; > + > + switch (mode) { > + case S5P_PWM0: > + tcon &= ~(0x0f << 0); > + tcon |= S3C2410_TCON_T0MANUALUPD; > + break; > + > + case S5P_PWM1: > + tcon &= ~(0x0f << 8); > + tcon |= S3C2410_TCON_T1MANUALUPD; > + break; > + > + case S5P_PWM2: > + tcon &= ~(0x0f << 0x0c); > + tcon |= S3C2410_TCON_T2MANUALUPD; > + break; > + > + case S5P_PWM3: > + tcon &= ~(0xf << 0x10); > + tcon |= S3C2410_TCON_T3MANUALUPD; > + break; > + > + case S5P_PWM4: > + tcon &= ~(7 << 0x14); > + tcon |= S3C2410_TCON_T4MANUALUPD; > + break; > + > + default: > + printk(KERN_ERR "Invalid Timer %d\n", mode); > + break; > + } > + > + __raw_writel(tcnt, S3C2410_TCNTB(mode)); > + __raw_writel(tcnt, S3C2410_TCMPB(mode)); > + __raw_writel(tcon, S3C2410_TCON); > +} > + > +static void s5p_time_start(enum s5p_timer_mode mode, bool periodic) > +{ > + unsigned long tcon; > + > + tcon = __raw_readl(S3C2410_TCON); > + > + switch (mode) { > + case S5P_PWM0: > + tcon |= S3C2410_TCON_T0START; > + tcon &= ~S3C2410_TCON_T0MANUALUPD; > + > + if (periodic) > + tcon |= S3C2410_TCON_T0RELOAD; > + else > + tcon &= ~S3C2410_TCON_T0RELOAD; > + break; > + > + case S5P_PWM1: > + tcon |= S3C2410_TCON_T1START; > + tcon &= ~S3C2410_TCON_T1MANUALUPD; > + > + if (periodic) > + tcon |= S3C2410_TCON_T1RELOAD; > + else > + tcon &= ~S3C2410_TCON_T1RELOAD; > + break; > + > + case S5P_PWM2: > + tcon |= S3C2410_TCON_T2START; > + tcon &= ~S3C2410_TCON_T2MANUALUPD; > + > + if (periodic) > + tcon |= S3C2410_TCON_T2RELOAD; > + else > + tcon &= ~S3C2410_TCON_T2RELOAD; > + break; > + > + case S5P_PWM3: > + tcon |= S3C2410_TCON_T3START; > + tcon &= ~S3C2410_TCON_T3MANUALUPD; > + > + if (periodic) > + tcon |= S3C2410_TCON_T3RELOAD; > + else > + tcon &= ~S3C2410_TCON_T3RELOAD; > + break; > + > + case S5P_PWM4: > + tcon |= S3C2410_TCON_T4START; > + tcon &= ~S3C2410_TCON_T4MANUALUPD; > + > + if (periodic) > + tcon |= S3C2410_TCON_T4RELOAD; > + else > + tcon &= ~S3C2410_TCON_T4RELOAD; > + break; > + > + default: > + printk(KERN_ERR "Invalid Timer %d\n", mode); > + break; > + } > + __raw_writel(tcon, S3C2410_TCON); > +} > + > +static int s5p_set_next_event(unsigned long cycles, > + struct clock_event_device *evt) > +{ > + s5p_time_setup(timer_source.event_id, cycles); > + s5p_time_start(timer_source.event_id, NON_PERIODIC); > + > + return 0; > +} > + > +static void s5p_set_mode(enum clock_event_mode mode, > + struct clock_event_device *evt) > +{ > + > + s5p_time_stop(timer_source.event_id); > + > + switch (mode) { > + case CLOCK_EVT_MODE_PERIODIC: > + s5p_time_setup(timer_source.event_id, clock_count_per_tick); > + s5p_time_start(timer_source.event_id, PERIODIC); > + break; > + > + case CLOCK_EVT_MODE_ONESHOT: > + break; > + > + case CLOCK_EVT_MODE_UNUSED: > + case CLOCK_EVT_MODE_SHUTDOWN: > + break; > + > + case CLOCK_EVT_MODE_RESUME: > + s5p_timer_resume(); > + break; > + } > +} > + > +static void s5p_timer_resume(void) > +{ > + /* event timer restart */ > + s5p_time_setup(timer_source.event_id, clock_count_per_tick); > + s5p_time_start(timer_source.event_id, PERIODIC); > + > + /* source timer restart */ > + s5p_time_setup(timer_source.source_id, TCNT_MAX); > + s5p_time_start(timer_source.source_id, PERIODIC); > +} > + > +void __init s5p_set_timer_source(enum s5p_timer_mode event, > + enum s5p_timer_mode source) > +{ > + timer_source.event_id = event; > + timer_source.source_id = source; > +} > + > +static struct clock_event_device time_event_device = { > + .name = "s5p_event_timer", > + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, > + .rating = 200, > + .shift = 32, Please use the new clock event function. I can't remember the exact function name, but there's function set the proper shift value instead of hard-coded. > + .set_next_event = s5p_set_next_event, > + .set_mode = s5p_set_mode, > +}; > + > +static irqreturn_t s5p_clock_event_isr(int irq, void *dev_id) > +{ > + struct clock_event_device *evt = &time_event_device; > + > + evt->event_handler(evt); > + > + return IRQ_HANDLED; > +} > + > +static struct irqaction s5p_clock_event_irq = { > + .name = "s5p_time_irq", > + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, > + .handler = s5p_clock_event_isr, > +}; > + > +static void s5p_clockevent_init(void) Please add __init since it's only used at __init function. > +{ > + unsigned long pclk; > + unsigned long clock_rate; > + unsigned int irq_number; > + struct clk *tscaler; > + > + pclk = clk_get_rate(timerclk); > + > + tscaler = clk_get_parent(tdiv_event); > + > + clk_set_rate(tscaler, pclk / 2); > + clk_set_rate(tdiv_event, pclk / 2); > + clk_set_parent(tin_event, tdiv_event); > + > + clock_rate = clk_get_rate(tin_event); > + clock_count_per_tick = clock_rate / HZ; > + > + time_event_device.mult = > + div_sc(clock_rate, NSEC_PER_SEC, time_event_device.shift); > + time_event_device.max_delta_ns = > + clockevent_delta2ns(-1, &time_event_device); > + time_event_device.min_delta_ns = > + clockevent_delta2ns(1, &time_event_device); > + > + time_event_device.cpumask = cpumask_of(0); > + clockevents_register_device(&time_event_device); > + > + irq_number = timer_source.event_id + IRQ_TIMER0; > + > + setup_irq(irq_number, &s5p_clock_event_irq); > +} > + > +static cycle_t s5p_timer_read(struct clocksource *cs) > +{ > + unsigned long offset = 0; > + > + switch (timer_source.source_id) { > + case S5P_PWM0: > + case S5P_PWM1: > + case S5P_PWM2: > + case S5P_PWM3: > + offset = (timer_source.source_id * 0x0c) + 0x14; > + case S5P_PWM4: > + offset = 0x40; > + break; > + > + default: > + printk(KERN_ERR "Invalid Timer %d\n", timer_source.source_id); > + return 0; > + } > + > + return (cycle_t) ~__raw_readl(S3C_TIMERREG(offset)); > +} > + > +struct clocksource time_clocksource = { > + .name = "s5p_clocksource_timer", > + .rating = 250, > + .read = s5p_timer_read, > + .mask = CLOCKSOURCE_MASK(32), > + .flags = CLOCK_SOURCE_IS_CONTINUOUS, > +}; > + > +static void s5p_clocksource_init(void) ditto. > +{ > + unsigned long pclk; > + unsigned long clock_rate; > + > + pclk = clk_get_rate(timerclk); > + > + clk_set_rate(tdiv_source, pclk / 2); > + clk_set_parent(tin_source, tdiv_source); > + > + clock_rate = clk_get_rate(tin_source); > + > + s5p_time_setup(timer_source.source_id, TCNT_MAX); > + s5p_time_start(timer_source.source_id, PERIODIC); > + > + if (clocksource_register_hz(&time_clocksource, clock_rate)) > + panic("%s: can't register clocksource\n", time_clocksource.name); > +} > + > +static void __init s5p_timer_resources(void) > +{ > + struct platform_device tmpdev; > + > + tmpdev.dev.bus = &platform_bus_type; > + > + timerclk = clk_get(NULL, "timers"); > + if (IS_ERR(timerclk)) > + panic("failed to get timers clock for system timer"); > + > + clk_enable(timerclk); > + > + tmpdev.id = timer_source.event_id; > + tin_event = clk_get(&tmpdev.dev, "pwm-tin"); > + if (IS_ERR(tin_event)) { > + clk_put(tin_event); > + panic("failed to get pwm-tin2 clock for system timer"); > + } > + > + tdiv_event = clk_get(&tmpdev.dev, "pwm-tdiv"); > + if (IS_ERR(tdiv_event)) { > + clk_put(tdiv_event); > + panic("failed to get pwm-tdiv2 clock for system timer"); > + } > + > + clk_enable(tin_event); > + > + tmpdev.id = timer_source.source_id; > + tin_source = clk_get(&tmpdev.dev, "pwm-tin"); > + if (IS_ERR(tin_source)) { > + clk_put(tin_source); > + panic("failed to get pwm-tin4 clock for system timer"); > + } > + > + tdiv_source = clk_get(&tmpdev.dev, "pwm-tdiv"); > + if (IS_ERR(tdiv_source)) { > + clk_put(tdiv_source); > + panic("failed to get pwm-tdiv4 clock for system timer"); > + } > + > + clk_enable(tin_source); > +} > + > +static void __init s5p_timer_init(void) > +{ > +#ifdef CONFIG_LOCAL_TIMERS > + twd_base = S5P_VA_TWD; > +#endif > + > + s5p_timer_resources(); > + s5p_clockevent_init(); > + s5p_clocksource_init(); > +} > + > +struct sys_timer s5p_timer = { > + .init = s5p_timer_init, > +}; > -- > 1.7.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |