Marek Szyrowski wrote:
>
> This patch adds missing GPYx gpio banks on Samsung S5PC210 platform.
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> arch/arm/mach-s5pv310/gpiolib.c | 49
> +++++++++++++++++++++++++++++
> arch/arm/mach-s5pv310/include/mach/gpio.h | 23 +++++++++++++-
> 2 files changed, 71 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv310/gpiolib.c b/arch/arm/mach-
> s5pv310/gpiolib.c
> index 55217b8..f417ecd 100644
> --- a/arch/arm/mach-s5pv310/gpiolib.c
> +++ b/arch/arm/mach-s5pv310/gpiolib.c
> @@ -199,6 +199,55 @@ static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[]
=
> {
> .label = "GPL2",
> },
> }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY0(0),
> + .ngpio = S5PV310_GPIO_Y0_NR,
> + .label = "GPY0",
> + },
> + }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY1(0),
> + .ngpio = S5PV310_GPIO_Y1_NR,
> + .label = "GPY1",
> + },
> + }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY2(0),
> + .ngpio = S5PV310_GPIO_Y2_NR,
> + .label = "GPY2",
> + },
> + }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY3(0),
> + .ngpio = S5PV310_GPIO_Y3_NR,
> + .label = "GPY3",
> + },
> + }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY4(0),
> + .ngpio = S5PV310_GPIO_Y4_NR,
> + .label = "GPY4",
> + },
> + }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY5(0),
> + .ngpio = S5PV310_GPIO_Y5_NR,
> + .label = "GPY5",
> + },
> + }, {
> + .config = &gpio_cfg_noint,
> + .chip = {
> + .base = S5PV310_GPY6(0),
> + .ngpio = S5PV310_GPIO_Y6_NR,
> + .label = "GPY6",
> + },
> + }, {
> .base = (S5P_VA_GPIO2 + 0xC00),
> .config = &gpio_cfg_noint,
> .irq_base = IRQ_EINT(0),
> diff --git a/arch/arm/mach-s5pv310/include/mach/gpio.h b/arch/arm/mach-
> s5pv310/include/mach/gpio.h
> index 20cb80c..4b44463 100644
> --- a/arch/arm/mach-s5pv310/include/mach/gpio.h
> +++ b/arch/arm/mach-s5pv310/include/mach/gpio.h
> @@ -50,6 +50,13 @@
> #define S5PV310_GPIO_X1_NR (8)
> #define S5PV310_GPIO_X2_NR (8)
> #define S5PV310_GPIO_X3_NR (8)
> +#define S5PV310_GPIO_Y0_NR (6)
> +#define S5PV310_GPIO_Y1_NR (4)
> +#define S5PV310_GPIO_Y2_NR (6)
> +#define S5PV310_GPIO_Y3_NR (8)
> +#define S5PV310_GPIO_Y4_NR (8)
> +#define S5PV310_GPIO_Y5_NR (8)
> +#define S5PV310_GPIO_Y6_NR (8)
> #define S5PV310_GPIO_Z_NR (7)
>
> /* GPIO bank numbers */
> @@ -87,7 +94,14 @@ enum s5p_gpio_number {
> S5PV310_GPIO_X1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X0),
> S5PV310_GPIO_X2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X1),
> S5PV310_GPIO_X3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X2),
> - S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
> + S5PV310_GPIO_Y0_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_X3),
> + S5PV310_GPIO_Y1_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y0),
> + S5PV310_GPIO_Y2_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y1),
> + S5PV310_GPIO_Y3_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y2),
> + S5PV310_GPIO_Y4_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y3),
> + S5PV310_GPIO_Y5_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y4),
> + S5PV310_GPIO_Y6_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y5),
> + S5PV310_GPIO_Z_START = S5PV310_GPIO_NEXT(S5PV310_GPIO_Y6),
> };
>
> /* S5PV310 GPIO number definitions */
> @@ -120,6 +134,13 @@ enum s5p_gpio_number {
> #define S5PV310_GPX1(_nr) (S5PV310_GPIO_X1_START + (_nr))
> #define S5PV310_GPX2(_nr) (S5PV310_GPIO_X2_START + (_nr))
> #define S5PV310_GPX3(_nr) (S5PV310_GPIO_X3_START + (_nr))
> +#define S5PV310_GPY0(_nr) (S5PV310_GPIO_Y0_START + (_nr))
> +#define S5PV310_GPY1(_nr) (S5PV310_GPIO_Y1_START + (_nr))
> +#define S5PV310_GPY2(_nr) (S5PV310_GPIO_Y2_START + (_nr))
> +#define S5PV310_GPY3(_nr) (S5PV310_GPIO_Y3_START + (_nr))
> +#define S5PV310_GPY4(_nr) (S5PV310_GPIO_Y4_START + (_nr))
> +#define S5PV310_GPY5(_nr) (S5PV310_GPIO_Y5_START + (_nr))
> +#define S5PV310_GPY6(_nr) (S5PV310_GPIO_Y6_START + (_nr))
> #define S5PV310_GPZ(_nr) (S5PV310_GPIO_Z_START + (_nr))
>
> /* the end of the S5PV310 specific gpios */
> --
Ok...but as you know, need to re-work based on latest.
Could you re-submit this based on my for-next which includes Exynos4?
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
