For S5P platforms, the end address in memory resource information for UART
devices is one byte more than the intended value. Fix this by reducing the
end address by one byte.
Signed-off-by: Thomas Abraham <thomas.abraham@xxxxxxxxxx>
---
arch/arm/plat-s5p/dev-uart.c | 12 ++++++------
1 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/plat-s5p/dev-uart.c b/arch/arm/plat-s5p/dev-uart.c
index 6a73428..afaf87f 100644
--- a/arch/arm/plat-s5p/dev-uart.c
+++ b/arch/arm/plat-s5p/dev-uart.c
@@ -28,7 +28,7 @@
static struct resource s5p_uart0_resource[] = {
[0] = {
.start = S5P_PA_UART0,
- .end = S5P_PA_UART0 + S5P_SZ_UART,
+ .end = S5P_PA_UART0 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -51,7 +51,7 @@ static struct resource s5p_uart0_resource[] = {
static struct resource s5p_uart1_resource[] = {
[0] = {
.start = S5P_PA_UART1,
- .end = S5P_PA_UART1 + S5P_SZ_UART,
+ .end = S5P_PA_UART1 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -74,7 +74,7 @@ static struct resource s5p_uart1_resource[] = {
static struct resource s5p_uart2_resource[] = {
[0] = {
.start = S5P_PA_UART2,
- .end = S5P_PA_UART2 + S5P_SZ_UART,
+ .end = S5P_PA_UART2 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -98,7 +98,7 @@ static struct resource s5p_uart3_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
[0] = {
.start = S5P_PA_UART3,
- .end = S5P_PA_UART3 + S5P_SZ_UART,
+ .end = S5P_PA_UART3 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -123,7 +123,7 @@ static struct resource s5p_uart4_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 4
[0] = {
.start = S5P_PA_UART4,
- .end = S5P_PA_UART4 + S5P_SZ_UART,
+ .end = S5P_PA_UART4 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -148,7 +148,7 @@ static struct resource s5p_uart5_resource[] = {
#if CONFIG_SERIAL_SAMSUNG_UARTS > 5
[0] = {
.start = S5P_PA_UART5,
- .end = S5P_PA_UART5 + S5P_SZ_UART,
+ .end = S5P_PA_UART5 + S5P_SZ_UART - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
--
1.6.6.rc2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
