Kamil Debski wrote:
>
Would be better if you could keep the subject style...
> Add platform support for Multi Format Codec 5.1 is a module available
> on S5PC110 and S5PC210 Samsung SoCs. Hardware is capable of handling
> a range of video codecs and this driver provides V4L2 interface for
> video decoding.
>
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> arch/arm/mach-s5pv210/clock.c | 6 ++++
> arch/arm/mach-s5pv210/include/mach/map.h | 4 ++
> arch/arm/plat-s5p/Kconfig | 5 +++
> arch/arm/plat-s5p/Makefile | 1 +
> arch/arm/plat-s5p/dev-mfc5.c | 37
> +++++++++++++++++++++++
> arch/arm/plat-samsung/include/plat/devs.h | 2 +
> 9 files changed, 104 insertions(+), 1 deletions(-)
> create mode 100644 arch/arm/plat-s5p/dev-mfc5.c
>
> diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
> index 5014b62..f7d742d 100644
> --- a/arch/arm/mach-s5pv210/clock.c
> +++ b/arch/arm/mach-s5pv210/clock.c
> @@ -364,6 +364,12 @@ static struct clk init_clocks_disable[] = {
> .enable = s5pv210_clk_ip0_ctrl,
> .ctrlbit = (1 << 26),
> }, {
> + .name = "mfc",
> + .id = -1,
> + .parent = &clk_pclk_psys.clk,
> + .enable = s5pv210_clk_ip0_ctrl,
> + .ctrlbit = (1 << 16),
> + }, {
> .name = "nfcon",
> .id = -1,
> .parent = &clk_hclk_psys.clk,
> diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-
> s5pv210/include/mach/map.h
> index 0982443..8f887c4 100644
> --- a/arch/arm/mach-s5pv210/include/mach/map.h
> +++ b/arch/arm/mach-s5pv210/include/mach/map.h
> @@ -107,6 +107,9 @@
> #define S5PV210_PA_DMC0 (0xF0000000)
> #define S5PV210_PA_DMC1 (0xF1400000)
>
> +/* MFC */
No need useless comment.
> +#define S5PV210_PA_MFC (0xF1700000)
> +
> /* compatibiltiy defines. */
> #define S3C_PA_UART S5PV210_PA_UART
> #define S3C_PA_HSMMC0 S5PV210_PA_HSMMC(0)
> @@ -123,6 +126,7 @@
> #define S5P_PA_FIMC0 S5PV210_PA_FIMC0
> #define S5P_PA_FIMC1 S5PV210_PA_FIMC1
> #define S5P_PA_FIMC2 S5PV210_PA_FIMC2
> +#define S5P_PA_MFC S5PV210_PA_MFC
>
> #define SAMSUNG_PA_ADC S5PV210_PA_ADC
> #define SAMSUNG_PA_CFCON S5PV210_PA_CFCON
> diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
> index 9755df9..c7a048e 100644
> --- a/arch/arm/plat-s5p/Kconfig
> +++ b/arch/arm/plat-s5p/Kconfig
> @@ -5,6 +5,11 @@
> #
> # Licensed under GPLv2
>
> +config S5P_DEV_MFC
> + bool
> + help
> + Compile in platform device definitions for MFC
> +
> config PLAT_S5P
> bool
> depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 ||
> ARCH_S5PV210 || ARCH_S5PV310)
> diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
> index df65cb7..ed0f33d 100644
> --- a/arch/arm/plat-s5p/Makefile
> +++ b/arch/arm/plat-s5p/Makefile
> @@ -23,6 +23,7 @@ obj-$(CONFIG_PM) += pm.o
> obj-$(CONFIG_PM) += irq-pm.o
>
> # devices
> +obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc5.o
Do we really need to distinguish mfc version in file name?
So why did you use just CONFIG_S5P_DEV_MFC as config name?
I mean don't use mixed name in there.
+obj-$(CONFIG_S5P_DEV_MFC5) += dev-mfc5.o
Or
+obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
I prefer the latter...because no need to separate the hardware version in
platform data now.
>
> obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o
> obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o
> diff --git a/arch/arm/plat-s5p/dev-mfc5.c b/arch/arm/plat-s5p/dev-mfc5.c
> new file mode 100644
> index 0000000..c06ea97
> --- /dev/null
> +++ b/arch/arm/plat-s5p/dev-mfc5.c
> @@ -0,0 +1,37 @@
> +/* Base S3C64XX mfc resource and device definitions */
> +
> +
Where is the GPL license?
This is very important...
> +#include <linux/kernel.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/ioport.h>
> +
> +#include <mach/map.h>
> +#include <plat/map-base.h>
Do we _really_ need <plat/map-base.h> inclusion?
NO.
> +#include <plat/devs.h>
> +#include <plat/irqs.h>
> +
> +/* MFC controller */
No need above comment.
> +static struct resource s5p_mfc_resource[] = {
> + [0] = {
> + .start = S5P_PA_MFC,
> + .end = S5P_PA_MFC + SZ_64K - 1,
> + .flags = IORESOURCE_MEM,
> + },
> + [1] = {
> + .start = IRQ_MFC,
> + .end = IRQ_MFC,
> + .flags = IORESOURCE_IRQ,
> + }
> +};
> +
> +struct platform_device s5p_device_mfc5 = {
> + .name = "s5p-mfc5",
> + .id = -1,
> + .num_resources = ARRAY_SIZE(s5p_mfc_resource),
> + .resource = s5p_mfc_resource,
> +};
> +
> +EXPORT_SYMBOL(s5p_device_mfc5);
> +
> +
No need useless 2 empty lines here.
> diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-
> samsung/include/plat/devs.h
> index 628b331..fc169da 100644
> --- a/arch/arm/plat-samsung/include/plat/devs.h
> +++ b/arch/arm/plat-samsung/include/plat/devs.h
> @@ -124,6 +124,8 @@ extern struct platform_device s5p_device_fimc2;
> extern struct platform_device s5p_device_fimc3;
> extern struct platform_device s5pv310_device_fb0;
>
> +extern struct platform_device s5p_device_mfc5;
> +
> /* s3c2440 specific devices */
>
> #ifdef CONFIG_CPU_S3C2440
> --
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
