From: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
This patch adds DM9000 Ethernet Controller device support for SMDKV210.
Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
arch/arm/mach-s5pv210/include/mach/map.h | 2 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 57 ++++++++++++++++++++++++++++++
2 files changed, 59 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index f1ff7cb..b2e0a62 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -16,6 +16,8 @@
#include <plat/map-base.h>
#include <plat/map-s5p.h>
+#define S5PV210_PA_SROM_BANK5 (0xA8000000)
+
#define S5PC110_PA_ONENAND (0xB0000000)
#define S5P_PA_ONENAND S5PC110_PA_ONENAND
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 1fbc45b..30eec11 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -14,6 +14,8 @@
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/sysdev.h>
+#include <linux/dm9000.h>
+#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -24,6 +26,8 @@
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
+#include <plat/regs-srom.h>
+#include <plat/gpio-cfg.h>
#include <plat/s5pv210.h>
#include <plat/devs.h>
#include <plat/cpu.h>
@@ -102,6 +106,39 @@ static struct samsung_keypad_platdata smdkv210_keypad_data __initdata = {
.cols = 8,
};
+static struct resource smdkv210_dm9000_resources[] = {
+ [0] = {
+ .start = S5PV210_PA_SROM_BANK5,
+ .end = S5PV210_PA_SROM_BANK5,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S5PV210_PA_SROM_BANK5 + 2,
+ .end = S5PV210_PA_SROM_BANK5 + 2,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT(9),
+ .end = IRQ_EINT(9),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+ },
+};
+
+static struct dm9000_plat_data smdkv210_dm9000_platdata = {
+ .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
+ .dev_addr = { 0x00, 0x09, 0xc0, 0xff, 0xec, 0x48 },
+};
+
+struct platform_device smdkv210_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdkv210_dm9000_resources),
+ .resource = smdkv210_dm9000_resources,
+ .dev = {
+ .platform_data = &smdkv210_dm9000_platdata,
+ },
+};
+
static struct platform_device *smdkv210_devices[] __initdata = {
&s5pv210_device_iis0,
&s5pv210_device_ac97,
@@ -119,8 +156,26 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
+ &smdkv210_dm9000,
};
+static void __init smdkv210_dm9000_init(void)
+{
+ unsigned int tmp;
+
+ gpio_request(S5PV210_MP01(5), "nCS5");
+ s3c_gpio_cfgpin(S5PV210_MP01(5), S3C_GPIO_SFN(2));
+ gpio_free(S5PV210_MP01(5));
+
+ tmp = (5 << S5P_SROM_BCX__TACC__SHIFT);
+ __raw_writel(tmp, S5P_SROM_BC5);
+
+ tmp = __raw_readl(S5P_SROM_BW);
+ tmp &= (S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS5__SHIFT);
+ tmp |= (1 << S5P_SROM_BW__NCS5__SHIFT);
+ __raw_writel(tmp, S5P_SROM_BW);
+}
+
static struct i2c_board_info smdkv210_i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), }, /* Samsung S524AD0XD1 */
};
@@ -150,6 +205,8 @@ static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
+ smdkv210_dm9000_init();
+
samsung_keypad_set_platdata(&smdkv210_keypad_data);
s3c24xx_ts_set_platdata(&s3c_ts_platform);
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
