Seungwhan Youn wrote: > > This patch fix wrong EPLL getting on setup clocks on S5PV210. > > Signed-off-by: Seungwhan Youn <sw.youn@xxxxxxxxxxx> > --- > arch/arm/mach-s5pv210/clock.c | 3 ++- > arch/arm/mach-s5pv210/include/mach/regs-clock.h | 3 ++- > 2 files changed, 4 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c > index 3f3b7ba..bcbe7e9 100644 > --- a/arch/arm/mach-s5pv210/clock.c > +++ b/arch/arm/mach-s5pv210/clock.c > @@ -1040,7 +1040,8 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) > > apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); > mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); > - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); > + epll = s5p_get_pll90xx(xtal, __raw_readl(S5P_EPLL_CON0), > + __raw_readl(S5P_EPLL_CON1)); Maybe you wanted to implement fractional PLL 4600B...not used 90xx in there. So need to update plat/pll.h to epll of s5pv210. > vpllsrc = clk_get_rate(&clk_vpllsrc.clk); > vpll = s5p_get_pll45xx(vpllsrc, __raw_readl(S5P_VPLL_CON), pll_4502); > > diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach- > s5pv210/include/mach/regs-clock.h > index 499aef7..5968535 100644 > --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h > +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h > @@ -24,7 +24,8 @@ > > #define S5P_APLL_CON S5P_CLKREG(0x100) > #define S5P_MPLL_CON S5P_CLKREG(0x108) > -#define S5P_EPLL_CON S5P_CLKREG(0x110) > +#define S5P_EPLL_CON0 S5P_CLKREG(0x110) > +#define S5P_EPLL_CON1 S5P_CLKREG(0x114) > #define S5P_VPLL_CON S5P_CLKREG(0x120) > > #define S5P_CLK_SRC0 S5P_CLKREG(0x200) > -- Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |