On Mon, Oct 04, 2010 at 09:13:17PM +0900, Seungwhan Youn wrote:
> +static int spdif_set_sysclk(struct snd_soc_dai *cpu_dai,
> + int clk_id, unsigned int freq, int dir)
> +{
If you save the clock rate here...
> + case SND_SOC_SPDIF_MAIN_AUDIO_CLK:
> + switch (div) {
> + case 256:
> + con |= CON_MCLKDIV_256FS;
> + break;
> + case 384:
> + con |= CON_MCLKDIV_384FS;
> + break;
> + case 512:
> + con |= CON_MCLKDIV_512FS;
> + break;
...then you can calculate this dynamically at runtime in hw_params which
makes life easier for users.
> +/**
> + * struct samsung_spdif_info - Samsung S/PDIF Controller information
> + * @lock: Spin lock for S/PDIF.
> + * @dev: The parent device passed to use from the probe.
> + * @regs: The pointer to the device register block.
> + * @pclk: The peri-clock pointer for spdif master operation.
> + * @sclk: The source clock pointer for making sync signals.
> + * @save_clkcon: Backup clkcon reg. in suspend.
> + * @save_con: Backup con reg. in suspend.
> + * @save_cstas: Backup cstas reg. in suspend.
> + * @dma_playback: DMA information for playback channel.
> + */
> +struct samsung_spdif_info {
> + spinlock_t lock;
No need to have this in the headers.
> +/* Registers */
> +#define CLKCON 0x00
> +#define CON 0x04
> +#define BSTAS 0x08
These should all be namespaced or in the driver file to avoid collisoons
with other things - even if only used in this driver things like CON are
risky for collisions with normal kernel headers the driver needs.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
