Hello,
On Tuesday, September 28, 2010 9:44 AM Kukjin Kim wrote:
> Marek Szyprowski wrote:
> >
> > Add required platform definitions for si470x radio device on Samsung
> > Goni board.
> >
> > Signed-off-by: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
> > Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> > Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> > ---
> > arch/arm/mach-s5pv210/Kconfig | 2 ++
> > arch/arm/mach-s5pv210/mach-goni.c | 30
> > ++++++++++++++++++++++++++++++
> > 2 files changed, 32 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> > index b46925b..b1f671d 100644
> > --- a/arch/arm/mach-s5pv210/Kconfig
> > +++ b/arch/arm/mach-s5pv210/Kconfig
> > @@ -83,9 +83,11 @@ config MACH_GONI
> > select S3C_DEV_HSMMC
> > select S3C_DEV_HSMMC1
> > select S3C_DEV_HSMMC2
> > + select S3C_DEV_I2C1
> > select S5P_DEV_ONENAND
> > select SAMSUNG_DEV_KEYPAD
> > select S5PV210_SETUP_FB_24BPP
> > + select S5PV210_SETUP_I2C1
> > select S5PV210_SETUP_KEYPAD
> > select S5PV210_SETUP_SDHCI
> > help
> > diff --git a/arch/arm/mach-s5pv210/mach-goni.c
> b/arch/arm/mach-s5pv210/mach-
> > goni.c
> > index b263f3a..5677c4d 100644
> > --- a/arch/arm/mach-s5pv210/mach-goni.c
> > +++ b/arch/arm/mach-s5pv210/mach-goni.c
> > @@ -38,6 +38,7 @@
> > #include <plat/devs.h>
> > #include <plat/cpu.h>
> > #include <plat/fb.h>
> > +#include <plat/iic.h>
> > #include <plat/keypad.h>
> > #include <plat/sdhci.h>
> >
> > @@ -200,6 +201,27 @@ static struct samsung_keypad_platdata keypad_data
> > __initdata = {
> > .cols = 3,
> > };
> >
> > +/* Radio */
> > +static struct i2c_board_info i2c1_devs[] __initdata = {
> > + {
> > + I2C_BOARD_INFO("si470x", 0x10),
> > + },
> > +};
> > +
> > +static void __init goni_radio_init(void)
> > +{
> > + int gpio;
> > +
> > + gpio = S5PV210_GPJ2(4); /* XMSMDATA_4 */
> > + gpio_request(gpio, "FM_INT");
>
> If returned fail?
Then there is something seriously wrong either with the platform or machine
startup code.
It is quite common to omit a check in the machine init code. Just take a look
at mach-s3c64xx/mach-smdk6410.c, smdk6410_machine_init() function. Lack of
checks here doesn't really have ANY impact on the stability of the kernel imho.
> > + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
> > + i2c1_devs[0].irq = gpio_to_irq(gpio);
>
> Need to sort out gpio interrupt stuff for this.
Right, forgot that this also requires interrupt support for gpio. This
definitely shows how important the gpio interrupt patches are and how much
is blocked because they are still no merged or even commented yet.
> Anyway, will check it soon.
>
>
> > +
> > + gpio = S5PV210_GPJ2(5); /* XMSMDATA_5 */
> > + gpio_request(gpio, "FM_RST");
>
> Same.
>
> > + gpio_direction_output(gpio, 1);
> > +}
> > +
> > /* MAX8998 regulators */
> > #if defined(CONFIG_REGULATOR_MAX8998) ||
> > defined(CONFIG_REGULATOR_MAX8998_MODULE)
> >
> > @@ -556,6 +578,7 @@ static struct platform_device *goni_devices[]
> __initdata = {
> > &s3c_device_hsmmc1,
> > &s3c_device_hsmmc2,
> > &samsung_device_keypad,
> > + &s3c_device_i2c1,
> > };
> >
> > static void __init goni_map_io(void)
> > @@ -567,6 +590,13 @@ static void __init goni_map_io(void)
> >
> > static void __init goni_machine_init(void)
> > {
> > + /* Radio: call before I2C 1 registeration */
> > + goni_radio_init();
> > +
> > + /* I2C1 */
> > + s3c_i2c1_set_platdata(NULL);
> > + i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
> > +
> > /* PMIC */
> > goni_pmic_init();
> > i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4,
> > i2c_gpio_pmic_devs,
> > --
>
> Others, looks ok.
>
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
