Chanwoo Choi wrote: > > Dear Ben, > > Don't you have any comment this patch? > Please give your commont for this patch. > > Chanwoo Choi > > Chanwoo Choi wrote: > > This patch the I2C board information for the WM8994 used in the Goni/Aquila > > as audio codec and adds the I2C/I2S platform drivers. Additionlly, to > > control power consumption have registerd the voltage consumer of WM8994 > > to the regulator framework. > > > > Additionally, I explain the constraints of the regulator of WM8994 codec. > > All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V) > > on a circuit diagram. "VCC_1.8V" regulator is always enabled, because it is > > used to many devices on Goni/Aquila board. This is required especially > > when there are many devices physically attached to "VCC_1.8V" and some of > > they did not "register" as consumers to "VCC_1.8V". "VCC_1.8V" might be > > turned off by those who are registered while "unregistered" are still active. > > > > Signed-off-by : Chanwoo Choi <cw00.choi@xxxxxxxxxxx> > > Signed-off-by : Joonyoung Shim <jy0922.shim@xxxxxxxxxxx> > > Signed-off-by : Kyungmin Park <kyungmin.park@xxxxxxxxxxx> > > --- Hmm... Please add my e-mail for S5P series later... I found this patch just now :-( Will check soon. Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |