Jeongbae Seo wrote:
>
> From: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
>
> This patch adds to support no internal clock divider in SDHCI.
> The external clock divider can be used to make a proper clock
> because SDHCI doesn't support internal clock divider by itself.
>
Hi,
Please add Chris Ball <cjb@xxxxxxxxxx> who is a maintainer of MMC subsystem
in Cc later.
> Signed-off-by: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
> Signed-off-by: Jeongbae Seo <jeongbae.seo@xxxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci-s3c.c | 63
> ++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 63 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
> index 71ad416..6160960 100644
> --- a/drivers/mmc/host/sdhci-s3c.c
> +++ b/drivers/mmc/host/sdhci-s3c.c
> @@ -96,6 +96,13 @@ static unsigned int sdhci_s3c_get_max_clk(struct
> sdhci_host *host)
> unsigned int rate, max;
> int clk;
>
> + /*
> + * There is only one clock source(sclk) if there is no clock divider
> + * in the host controller
> + */
> + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
> + return clk_round_rate(ourhost->clk_bus[2], UINT_MAX);
> +
> /* note, a reset will reset the clock source */
>
> sdhci_s3c_check_sclk(host);
> @@ -130,6 +137,15 @@ static unsigned int sdhci_s3c_consider_clock(struct
> sdhci_s3c *ourhost,
> if (!clksrc)
> return UINT_MAX;
>
> + /*
> + * There is only one clock source(sclk) if there is no clock divider
> + * in the host controller
> + */
> + if (ourhost->host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
> + rate = clk_round_rate(clksrc, wanted);
> + return wanted - rate;
> + }
> +
> rate = clk_get_rate(clksrc);
>
> for (div = 1; div < 256; div *= 2) {
> @@ -159,6 +175,7 @@ static void sdhci_s3c_set_clock(struct sdhci_host
*host,
> unsigned int clock)
> int best_src = 0;
> int src;
> u32 ctrl;
> + unsigned int timeout;
>
> /* don't bother if the clock is going off. */
> if (clock == 0)
> @@ -204,6 +221,35 @@ static void sdhci_s3c_set_clock(struct sdhci_host
*host,
> unsigned int clock)
> (ourhost->pdata->cfg_card)(ourhost->pdev, host-
> >ioaddr,
> &ios, NULL);
> }
> +
> + /*
> + * There is only one clock source(sclk) if there is no clock divider
> + * in the host controller
> + */
> + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK) {
> + writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
> + clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
> +
> + writew(SDHCI_CLOCK_INT_EN, host->ioaddr +
> SDHCI_CLOCK_CONTROL);
> +
> + /* Wait max 20 ms */
> + timeout = 20;
> + while (!((sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> + & SDHCI_CLOCK_INT_STABLE)) {
> + if (timeout == 0) {
> + printk(KERN_ERR "%s: clock never
> stabilised.\n"
> + , mmc_hostname(host-
> >mmc));
> + return;
> + }
> + timeout--;
> + mdelay(1);
> + }
> +
> + writew(SDHCI_CLOCK_INT_EN | SDHCI_CLOCK_CARD_EN,
> + host->ioaddr + SDHCI_CLOCK_CONTROL);
> +
> + host->clock = clock;
> + }
> }
>
> /**
> @@ -221,6 +267,13 @@ static unsigned int sdhci_s3c_get_min_clock(struct
> sdhci_host *host)
> unsigned int delta, min = UINT_MAX;
> int src;
>
> + /*
> + * There is only one clock source(sclk) if there is no clock divider
> + * in the host controller
> + */
> + if (host->quirks & SDHCI_QUIRK_NONSTANDARD_CLOCK)
> + return clk_round_rate(ourhost->clk_bus[2], 400000);
> +
> for (src = 0; src < MAX_BUS_CLK; src++) {
> delta = sdhci_s3c_consider_clock(ourhost, src, 0);
> if (delta == UINT_MAX)
> @@ -425,6 +478,16 @@ static int __devinit sdhci_s3c_probe(struct
> platform_device *pdev)
> /* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
> host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
>
> + /*
> + * If controller does not have internal clock divider,
> + * we need to use another method with setup a quirk.
> + */
> + if (pdata->clk_type)
> + host->quirks |= SDHCI_QUIRK_NONSTANDARD_CLOCK;
> +
> + if (pdata->host_caps)
> + host->mmc->caps |= pdata->host_caps;
> +
If you want to add above feature, please separate it...
(snip)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
