On Fri, Jul 30, 2010 at 7:48 AM, Ben Dooks <ben@xxxxxxxxxxxx> wrote:
> On 28/07/10 04:04, Chanwoo Choi wrote:
>
> [snip]
>
>
>> +/* GPIO I2C AP 1.8V */
>> +#define AP_I2C_GPIO_BUS_5 5
>> +static struct i2c_gpio_platform_data i2c_gpio5_data = {
>> + .sda_pin = S5PV210_MP05(3), /* XM0ADDR_11 */
>> + .scl_pin = S5PV210_MP05(2), /* XM0ADDR_10 */
>> +};
>> +
>> +static struct platform_device i2c_gpio5 = {
>> + .name = "i2c-gpio",
>> + .id = AP_I2C_GPIO_BUS_5,
>> + .dev = {
>> + .platform_data = &i2c_gpio5_data,
>> + },
>> +};
>> +
>> +static struct i2c_board_info i2c_gpio5_devs[] __initdata = {
>> + {
>> + /* CS/ADDR = low 0x34 (FYI: high = 0x36) */
>> + I2C_BOARD_INFO("wm8994", 0x34 >> 1),
>> + .platform_data = &wm8994_platform_data,
>> + },
>> +};
>> +
>> +static void __init aquila_sound_init(void)
>> +{
>> + unsigned int gpio;
>> +
>> + /* CODEC_XTAL_EN */
>> + gpio = S5PV210_GPH3(2); /* XEINT_26 */
>> + gpio_request(gpio, "CODEC_XTAL_EN");
>> + s3c_gpio_cfgpin(gpio, S3C_GPIO_OUTPUT);
>> + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
>> + gpio_direction_output(gpio, 1);
>
> gpio_direction_output() should have done the cfgpin()
> call.
Good catch. Thanks.
I think we required that extend the current gpiolib to support the
setpull like functions. also sleep gpio pin configuration.
Marek or shim? do you have any ideas?
>
>> + /* CLKOUT[9:8] set to 0x3(XUSBXTI) of 0xE010E000(OTHERS)
>> + * for 24MHZ
>> + */
>> + writel(readl(S5P_OTHERS) | (0x3 << 8), S5P_OTHERS);
>
> Not sure if this should be being done directly? will it affect
> the current clock tree?
It's almost done by bootloader. but we make sure it's really routed
the CLKOUT to XUSBXTI.
Thank you,
Kyungmin Park
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
