2010/7/28 Ben Dooks <ben-linux@xxxxxxxxx>: > On Wed, Jul 28, 2010 at 08:51:06AM +0530, nitin vishnoi wrote: >> Hi >> >> I am porting the 2.6.33.6 kernel,which i took from kernel.org.I am trying to >> port it on samsung-s3c2451 board. >> But i am not getting the shell prompt,due to getting the following error.Any >> body can tell due to what this error i am getting? >> >> Starting kernel ... >> >> >> Uncompressing Linux... done, booting the kernel. >> Linux version 2.6.33.6 (root@ubntu-desktop) (gcc version 4.2.2) #12 Mon Jul >> 26 18:39:19 IST 2010 >> CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 >> CPU: VIVT data cache, VIVT instruction cache >> Machine: SMDK2450 >> Ignoring unrecognised tag 0x00000000 >> Memory policy: ECC disabled, Data cache writeback >> CPU S3C2450 EVT3 (id 0x32450003) >> SPA epll 80200102 Mpll 80640061 clkdiv0 557 >> S3C24XX Clocks, (c) 2004 Simtec Electronics >> S3C2450: mpll on 800.000 MHz, cpu 400.000 MHz, mem 133.333 MHz, pclk 66.666 >> MHz >> S3C2450: epll on 96.000 MHz, usb-bus 48.000 MHz >> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 >> Kernel command line: root=/dev/ram0 initrd=0x30800000,16M ramdisk=32768 >> init=/bin/sh console=ttySAC3,115200 mem=64M >> PID hash table entries: 256 (order: -2, 1024 bytes) >> Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) >> Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) >> Memory: 64MB = 64MB total >> Memory: 45432KB available (2588K code, 271K data, 116K init, 0K highmem) >> Hierarchical RCU implementation. >> NR_IRQS:109 >> irq: clearing subpending status 02000006 >> irq: clearing subpending status 02000002 >> timer tcon=00000000, tcnt 28af, tcfg 00000f00,00000000, usec 00007ae2 >> Console: colour dummy device 80x30 >> console [ttySAC3] enabled >> Calibrating delay loop... 398.95 BogoMIPS (lpj=997376) >> Mount-cache hash table entries: 512 >> CPU: Testing write buffer coherency: ok >> NET: Registered protocol family 16 >> whats up blady >> hello >> entered machine init >> S3C Power Management, Copyright 2004 Simtec Electronics >> S3C2450: Initialising architecture >> SPA s3c2450_init >> S3C2450: IRQ Support >> bio: create slab <bio-0> at 0 >> SCSI subsystem initialized >> NET: Registered protocol family 2 >> IP route cache hash table entries: 1024 (order: 0, 4096 bytes) >> TCP established hash table entries: 2048 (order: 2, 16384 bytes) >> TCP bind hash table entries: 2048 (order: 1, 8192 bytes) >> TCP: Hash tables configured (established 2048 bind 2048) >> TCP reno registered >> UDP hash table entries: 256 (order: 0, 4096 bytes) >> UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) >> NET: Registered protocol family 1 >> Trying to unpack rootfs image as initramfs... >> rootfs image is not initramfs (no cpio magic); looks like an initrd >> Freeing initrd memory: 16384K >> NetWinder Floating Point Emulator V0.97 (double precision) >> JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. >> ROMFS MTD (C) 2007 Red Hat, Inc. >> msgmni has been set to 120 >> alg: No test for stdrng (krng) >> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) >> io scheduler noop registered >> io scheduler deadline registered >> io scheduler cfq registered (default) >> brd: module loaded >> loop: module loaded >> Uniform Multi-Platform E-IDE driver >> ide-gd driver 1.18 >> ide-cd driver 5.00 >> PPP generic driver version 2.4.2 >> PPP Deflate Compression module registered >> PPP BSD Compression module registered >> PPP MPPE Compression module registered >> NET: Registered protocol family 24 >> SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). >> CSLIP: code copyright 1989 Regents of the University of California. >> mice: PS/2 mouse device common for all mice >> TCP cubic registered >> RAMDISK: gzip image found at block 0 >> EXT2-fs (ram0): warning: maximal mount count reached, running e2fsck is >> recommended >> VFS: Mounted root (ext2 filesystem) on device 1:0. >> Freeing init memory: 116K >> Warning: unable to open an initial console. >> Kernel panic - not syncing: Attempted to kill init! >> [<c002b900>] (unwind_backtrace+0x0/0xe0) from [<c003fe9c>] >> (panic+0x40/0x12c) >> [<c003fe9c>] (panic+0x40/0x12c) from [<c0042cac>] (do_exit+0x58/0x57c) >> [<c0042cac>] (do_exit+0x58/0x57c) from [<c0043254>] >> (do_group_exit+0x84/0xb8) >> [<c0043254>] (do_group_exit+0x84/0xb8) from [<c004329c>] >> (sys_exit_group+0x14/0x20) >> [<c004329c>] (sys_exit_group+0x14/0x20) from [<c0025e80>] >> (ret_fast_syscall+0x0/0x28) > > looks like whatever you're trying to run as init doesn't have /dev/console > available. Ben, I make sure there is /dev/console in his rootfs directory. nitin vishnoi, do you confirm you need the ext to mount the ramdisk? maybe you can decrease 'ramdisk=32768' to 'ramdisk=8192'. >there seems to be no evidence of UARTs being added in the > setup, are they being registered with the serial driver properly? > > -- > Ben > > Q: What's a light-year? > A: One-third less calories than a regular year. > > -- *linux-arm-kernel mailing list mail addr:linux-arm-kernel@xxxxxxxxxxxxxxxxxxx you can subscribe by: http://lists.infradead.org/mailman/listinfo/linux-arm-kernel * linux-arm-NUC900 mailing list mail addr:NUC900@xxxxxxxxxxxxxxxx main web: https://groups.google.com/group/NUC900 you can subscribe it by sending me mail: mcuos.com@xxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |