Sylwester Nawrocki wrote:
>
> Add support for FIMC on Samsung Aquila board.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
> arch/arm/mach-s5pv210/Kconfig | 4 ++++
> arch/arm/mach-s5pv210/mach-aquila.c | 7 +++++++
> 2 files changed, 11 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index 039ba8c..b81b91b 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -58,9 +58,13 @@ menu "S5PC110 Machines"
> config MACH_AQUILA
> bool "Aquila"
> select CPU_S5PV210
> + select COMMON_AQUILA_GONI
...
> select ARCH_SPARSEMEM_ENABLE
> select S5PV210_SETUP_FB_24BPP
> select S3C_DEV_FB
> + select S5P_DEV_FIMC0
> + select S5P_DEV_FIMC1
> + select S5P_DEV_FIMC2
> select S5PC110_DEV_ONENAND
> help
> Machine support for the Samsung Aquila target based on S5PC110
> SoC
> diff --git a/arch/arm/mach-s5pv210/mach-aquila.c
b/arch/arm/mach-s5pv210/mach-
> aquila.c
> index 0992618..7528514 100644
> --- a/arch/arm/mach-s5pv210/mach-aquila.c
> +++ b/arch/arm/mach-s5pv210/mach-aquila.c
> @@ -35,6 +35,9 @@
> #include <plat/devs.h>
> #include <plat/cpu.h>
> #include <plat/fb.h>
> +#include <plat/fimc.h>
> +
> +#include "common-aquila-goni.h"
Hmm...please refer to my another comment.
>
> /* Following are default values for UCON, ULCON and UFCON UART registers
*/
> #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> @@ -445,6 +448,9 @@ static struct platform_device *aquila_devices[]
__initdata =
> {
> &aquila_device_gpiokeys,
> &s3c_device_fb,
> &s5pc110_device_onenand,
> + &s5p_device_fimc0,
> + &s5p_device_fimc1,
> + &s5p_device_fimc2,
> };
>
> static void __init aquila_map_io(void)
> @@ -465,6 +471,7 @@ static void __init aquila_machine_init(void)
> s3c_fb_set_platdata(&aquila_lcd_pdata);
>
> platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
> + s5pv210_common_fimc_clk_init();
Hmm...really need this fimc_clk_init here not driver?
> }
>
> MACHINE_START(AQUILA, "Aquila")
> --
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
