Kyungmin Park wrote: > > I don't see the Samsung SoCs don't have RTC feature. > Yes, you're right... But it doesn't mean the RTC driver can support every Samsung SoCs now. > I think S3C_RTC only depends on PLAT_SAMSUNG so PLAT_SAMSUNG select > HAVE_S3C_RTC is enough. So I think, this is not bad. > > Thank you, > Kyungmin Park > > On Wed, Jul 21, 2010 at 6:00 PM, Kukjin Kim <kgene.kim@xxxxxxxxxxx> wrote: > > From: Atul Dahiya <atul.dahiya@xxxxxxxxxxx> > > > > This patch moves the dependency of RTC driver from MACH_XXX(board) to > > ARCH_XXX(SoC). This will enable all machines using Samsung S5P6440, > S5PC100 > > and S5PV210 SoCs to use RTC driver by default. > > > > Signed-off-by: Atul Dahiya <atul.dahiya@xxxxxxxxxxx> > > Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> > > --- > > arch/arm/Kconfig | 3 +++ > > arch/arm/mach-s5p6440/Kconfig | 1 - > > arch/arm/mach-s5pc100/Kconfig | 1 - > > arch/arm/mach-s5pv210/Kconfig | 2 -- > > 4 files changed, 3 insertions(+), 4 deletions(-) > > > > diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig > > index 98922f7..ea668a4 100644 > > --- a/arch/arm/Kconfig > > +++ b/arch/arm/Kconfig > > @@ -672,6 +672,7 @@ config ARCH_S5P6440 > > select GENERIC_GPIO > > select HAVE_CLK > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C_RTC > > help > > Samsung S5P6440 CPU based systems > > > > @@ -691,6 +692,7 @@ config ARCH_S5PC100 > > select CPU_V7 > > select ARM_L1_CACHE_SHIFT_6 > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C_RTC > > help > > Samsung S5PC100 series based systems > > > > @@ -701,6 +703,7 @@ config ARCH_S5PV210 > > select HAVE_CLK > > select ARM_L1_CACHE_SHIFT_6 > > select ARCH_USES_GETTIMEOFFSET > > + select HAVE_S3C_RTC > > help > > Samsung S5PV210/S5PC110 series based systems > > > > diff --git a/arch/arm/mach-s5p6440/Kconfig b/arch/arm/mach-s5p6440/Kconfig > > index b2d4716..de8f08d 100644 > > --- a/arch/arm/mach-s5p6440/Kconfig > > +++ b/arch/arm/mach-s5p6440/Kconfig > > @@ -20,7 +20,6 @@ config MACH_SMDK6440 > > select SAMSUNG_DEV_ADC > > select S3C_DEV_RTC > > select S3C_DEV_WDT > > - select HAVE_S3C_RTC > > select HAVE_S3C2410_WATCHDOG > > help > > Machine support for the Samsung SMDK6440 > > diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig > > index 2602895..e9c3d98 100644 > > --- a/arch/arm/mach-s5pc100/Kconfig > > +++ b/arch/arm/mach-s5pc100/Kconfig > > @@ -48,7 +48,6 @@ config MACH_SMDKC100 > > select S5PC100_SETUP_FB_24BPP > > select S5PC100_SETUP_I2C1 > > select S5PC100_SETUP_SDHCI > > - select HAVE_S3C_RTC > > help > > Machine support for the Samsung SMDKC100 > > > > diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig > > index 04597cc..7f029d1 100644 > > --- a/arch/arm/mach-s5pv210/Kconfig > > +++ b/arch/arm/mach-s5pv210/Kconfig > > @@ -75,7 +75,6 @@ config MACH_SMDKV210 > > select SAMSUNG_DEV_TS > > select S3C_DEV_RTC > > select S3C_DEV_WDT > > - select HAVE_S3C_RTC > > select HAVE_S3C2410_WATCHDOG > > help > > Machine support for Samsung SMDKV210 > > @@ -86,7 +85,6 @@ config MACH_SMDKC110 > > select ARCH_SPARSEMEM_ENABLE > > select S3C_DEV_RTC > > select S3C_DEV_WDT > > - select HAVE_S3C_RTC > > select HAVE_S3C2410_WATCHDOG > > help > > Machine support for Samsung SMDKC110 > > -- Thanks. Best regards, Kgene. -- Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |