This patch changes the definition name of default UCON, ULCON, and
UFCON UART registers from ARCH(SoC) to Machine(Board). Because it
is board specific UART configuration.
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
arch/arm/mach-s5p6440/mach-smdk6440.c | 30 +++++++++++-----------
arch/arm/mach-s5p6442/mach-smdk6442.c | 24 +++++++++---------
arch/arm/mach-s5pc100/mach-smdkc100.c | 30 +++++++++++-----------
arch/arm/mach-s5pv210/mach-aquila.c | 42 ++++++++++++++++++---------------
arch/arm/mach-s5pv210/mach-goni.c | 42 ++++++++++++++++++---------------
arch/arm/mach-s5pv210/mach-smdkc110.c | 30 +++++++++++-----------
arch/arm/mach-s5pv210/mach-smdkv210.c | 30 +++++++++++-----------
7 files changed, 118 insertions(+), 110 deletions(-)
diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
index 8291fec..fedc142 100644
--- a/arch/arm/mach-s5p6440/mach-smdk6440.c
+++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
@@ -41,16 +41,16 @@
#include <plat/adc.h>
#include <plat/ts.h>
-#define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5P6440_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDK6440_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5P6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDK6440_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_TXTRIG16 | \
S3C2410_UFCON_RXTRIG8)
@@ -58,30 +58,30 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5P6440_UCON_DEFAULT,
- .ulcon = S5P6440_ULCON_DEFAULT,
- .ufcon = S5P6440_UFCON_DEFAULT,
+ .ucon = SMDK6440_UCON_DEFAULT,
+ .ulcon = SMDK6440_ULCON_DEFAULT,
+ .ufcon = SMDK6440_UFCON_DEFAULT,
},
};
diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c
index 6e061be..8d8d042 100644
--- a/arch/arm/mach-s5p6442/mach-smdk6442.c
+++ b/arch/arm/mach-s5p6442/mach-smdk6442.c
@@ -27,16 +27,16 @@
#include <plat/cpu.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5P6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5P6442_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5P6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
@@ -44,23 +44,23 @@ static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5P6442_UCON_DEFAULT,
- .ulcon = S5P6442_ULCON_DEFAULT,
- .ufcon = S5P6442_UFCON_DEFAULT,
+ .ucon = SMDK6442_UCON_DEFAULT,
+ .ulcon = SMDK6442_ULCON_DEFAULT,
+ .ufcon = SMDK6442_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5P6442_UCON_DEFAULT,
- .ulcon = S5P6442_ULCON_DEFAULT,
- .ufcon = S5P6442_UFCON_DEFAULT,
+ .ucon = SMDK6442_UCON_DEFAULT,
+ .ulcon = SMDK6442_ULCON_DEFAULT,
+ .ufcon = SMDK6442_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5P6442_UCON_DEFAULT,
- .ulcon = S5P6442_ULCON_DEFAULT,
- .ufcon = S5P6442_UFCON_DEFAULT,
+ .ucon = SMDK6442_UCON_DEFAULT,
+ .ulcon = SMDK6442_ULCON_DEFAULT,
+ .ufcon = SMDK6442_UFCON_DEFAULT,
},
};
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index bf1b927..9afe9f7 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -47,16 +47,16 @@
#include <plat/ts.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PC100_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDKC100_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDKC100_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S3C2440_UFCON_RXTRIG8 | \
S3C2440_UFCON_TXTRIG16)
@@ -64,30 +64,30 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PC100_UCON_DEFAULT,
- .ulcon = S5PC100_ULCON_DEFAULT,
- .ufcon = S5PC100_UFCON_DEFAULT,
+ .ucon = SMDKC100_UCON_DEFAULT,
+ .ulcon = SMDKC100_ULCON_DEFAULT,
+ .ufcon = SMDKC100_UFCON_DEFAULT,
},
};
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 0992618..a7762e6 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -37,53 +37,57 @@
#include <plat/fb.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
+#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
/*
* Actually UART0 can support 256 bytes fifo, but aquila board
* supports 128 bytes fifo because of initial chip bug
*/
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
+ .ufcon = (AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG128 |
+ S5PV210_UFCON_RXTRIG128),
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = (AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG64 |
+ S5PV210_UFCON_RXTRIG64),
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = (AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 |
+ S5PV210_UFCON_RXTRIG16),
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
+ .ucon = AQUILA_UCON_DEFAULT,
+ .ulcon = AQUILA_ULCON_DEFAULT,
+ .ufcon = (AQUILA_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 |
+ S5PV210_UFCON_RXTRIG16),
},
};
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 7b18505..e11df1a 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -37,49 +37,53 @@
#include <plat/fb.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define GONI_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
+#define GONI_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg goni_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG256 | S5PV210_UFCON_RXTRIG256,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = (GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG256 |
+ S5PV210_UFCON_RXTRIG256),
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = (GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG64 |
+ S5PV210_UFCON_RXTRIG64),
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = (GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 |
+ S5PV210_UFCON_RXTRIG16),
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT |
- S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
+ .ucon = GONI_UCON_DEFAULT,
+ .ulcon = GONI_ULCON_DEFAULT,
+ .ufcon = (GONI_UFCON_DEFAULT |
+ S5PV210_UFCON_TXTRIG16 |
+ S5PV210_UFCON_RXTRIG16),
},
};
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 723e607..5f35b2a 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -28,16 +28,16 @@
#include <plat/ata.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDKC110_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDKC110_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
@@ -45,30 +45,30 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKC110_UCON_DEFAULT,
+ .ulcon = SMDKC110_ULCON_DEFAULT,
+ .ufcon = SMDKC110_UFCON_DEFAULT,
},
};
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index cc902c1..64330b7 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -30,16 +30,16 @@
#include <plat/ata.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
-#define S5PV210_ULCON_DEFAULT S3C2410_LCON_CS8
+#define SMDKV210_ULCON_DEFAULT S3C2410_LCON_CS8
-#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+#define SMDKV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
@@ -47,30 +47,30 @@ static struct s3c2410_uartcfg smdkv210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
- .ucon = S5PV210_UCON_DEFAULT,
- .ulcon = S5PV210_ULCON_DEFAULT,
- .ufcon = S5PV210_UFCON_DEFAULT,
+ .ucon = SMDKV210_UCON_DEFAULT,
+ .ulcon = SMDKV210_ULCON_DEFAULT,
+ .ufcon = SMDKV210_UFCON_DEFAULT,
},
};
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
