Previously, most of CLK_DIV/SRC register accessing mask and shift values were used at arch/arm/mach-s5pv210/clock.c only; thus we had not been using macros for these. However, as CPUFREQ uses those shift and mask values as well, we'd better define them at a single location, whose proper location would be regs-clock.h. Note that only the information about registers used by CPUFREQ are defined. However, we may need to define other registers later if we add other parts. Signed-off-by: MyungJoo Ham <myungjoo.ham@xxxxxxxxxxx> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx> --- arch/arm/mach-s5pv210/include/mach/regs-clock.h | 45 +++++++++++++++++++++-- 1 files changed, 42 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 2a25ab4..a117ecc 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -66,11 +66,30 @@ #define S5P_CLKGATE_BUS0 S5P_CLKREG(0x484) #define S5P_CLKGATE_BUS1 S5P_CLKREG(0x488) #define S5P_CLK_OUT S5P_CLKREG(0x500) +#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) +#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) +#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) +#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) + +#define S5P_ARM_MCS_CON S5P_CLKREG(0x6100) /* CLKSRC0 */ -#define S5P_CLKSRC0_MUX200_MASK (0x1<<16) -#define S5P_CLKSRC0_MUX166_MASK (0x1<<20) -#define S5P_CLKSRC0_MUX133_MASK (0x1<<24) +#define S5P_CLKSRC0_APLL_MASK (0x1 << 0) +#define S5P_CLKSRC0_APLL_SHIFT (0) +#define S5P_CLKSRC0_MPLL_MASK (0x1 << 4) +#define S5P_CLKSRC0_MPLL_SHIFT (4) +#define S5P_CLKSRC0_EPLL_MASK (0x1 << 8) +#define S5P_CLKSRC0_EPLL_SHIFT (8) +#define S5P_CLKSRC0_VPLL_MASK (0x1 << 12) +#define S5P_CLKSRC0_VPLL_SHIFT (12) +#define S5P_CLKSRC0_MUX200_MASK (0x1 << 16) +#define S5P_CLKSRC0_MUX200_SHIFT (16) +#define S5P_CLKSRC0_MUX166_MASK (0x1 << 20) +#define S5P_CLKSRC0_MUX166_SHIFT (20) +#define S5P_CLKSRC0_MUX133_MASK (0x1 << 24) +#define S5P_CLKSRC0_MUX133_SHIFT (24) +#define S5P_CLKSRC0_ONENAND_MASK (0x1 << 28) +#define S5P_CLKSRC0_ONENAND_SHIFT (28) /* CLKDIV0 */ #define S5P_CLKDIV0_APLL_SHIFT (0) @@ -90,6 +109,26 @@ #define S5P_CLKDIV0_PCLK66_SHIFT (28) #define S5P_CLKDIV0_PCLK66_MASK (0x7 << S5P_CLKDIV0_PCLK66_SHIFT) +/* CLKSRC2 */ +#define S5P_CLKSRC2_G3D_MASK (0x3 << 0) +#define S5P_CLKSRC2_G3D_SHIFT (0) +#define S5P_CLKSRC2_MFC_MASK (0x3 << 4) +#define S5P_CLKSRC2_MFC_SHIFT (4) +#define S5P_CLKSRC2_G2D_MASK (0x3 << 8) +#define S5P_CLKSRC2_G2D_SHIFT (8) + +/* CLKDIV2 */ +#define S5P_CLKDIV2_G3D_MASK (0xF << 0) +#define S5P_CLKDIV2_G3D_SHIFT (0) +#define S5P_CLKDIV2_MFC_MASK (0xF << 4) +#define S5P_CLKDIV2_MFC_SHIFT (4) +#define S5P_CLKDIV2_G2D_MASK (0xF << 8) +#define S5P_CLKDIV2_G2D_SHIFT (8) + +/* CLKDIV6 */ +#define S5P_CLKDIV6_ONEDRAM_MASK (0xf<<28) +#define S5P_CLKDIV6_ONEDRAM_SHIFT (28) + /* Registers related to power management */ #define S5P_PWR_CFG S5P_CLKREG(0xC000) #define S5P_EINT_WAKEUP_MASK S5P_CLKREG(0xC004) -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |