Marek Szyprowski wrote:
>
> This patch adds required platform definitions for MAX8998 PMIC driver.
Power
> regulators for LDO and BUCK outputs has been defined as well as a simple
> gpio-keys button for power key (to enable wakeup functionality with
> external interrupt).
Almost same with previous patch...except ldo7_data, ldo17_data and
name...Hmm...
See the previous comments...
>
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
> ---
> arch/arm/mach-s5pv210/mach-goni.c | 323
> +++++++++++++++++++++++++++++++++++++
> 1 files changed, 323 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/mach-goni.c
b/arch/arm/mach-s5pv210/mach-
> goni.c
> index 05b4a1a..f0eaf86 100644
> --- a/arch/arm/mach-s5pv210/mach-goni.c
> +++ b/arch/arm/mach-s5pv210/mach-goni.c
> @@ -13,8 +13,13 @@
> #include <linux/init.h>
> #include <linux/serial_core.h>
> #include <linux/fb.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c-gpio.h>
> +#include <linux/mfd/max8998.h>
> #include <linux/delay.h>
> #include <linux/clk.h>
> +#include <linux/gpio_keys.h>
> +#include <linux/input.h>
>
No need inclusion linux/gpio.h and plat/gpio-cfg.h?
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
> @@ -107,9 +112,323 @@ static struct s3c_fb_platdata goni_lcd_pdata
__initdata
> = {
> .setup_gpio = s5pv210_fb_gpio_setup_24bpp,
> };
>
(snip)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@xxxxxxxxxxx>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
