From: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
This patch adds the members of platdata which is wp_gpio.
The wp_gpio is a gpio_number which is connected with WP pin of SD Slot.
Signed-off-by: Hyuk Lee <hyuk1.lee@xxxxxxxxxxx>
Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
---
arch/arm/plat-samsung/dev-hsmmc.c | 2 ++
arch/arm/plat-samsung/dev-hsmmc1.c | 2 ++
arch/arm/plat-samsung/dev-hsmmc2.c | 2 ++
arch/arm/plat-samsung/dev-hsmmc3.c | 2 ++
arch/arm/plat-samsung/include/plat/sdhci.h | 2 ++
5 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c
index 4c05b39..a9e02b4 100644
--- a/arch/arm/plat-samsung/dev-hsmmc.c
+++ b/arch/arm/plat-samsung/dev-hsmmc.c
@@ -61,6 +61,8 @@ void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
+ if (pd->wp_gpio)
+ set->wp_gpio = pd->wp_gpio;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c
index e49bc4c..5c05ada 100644
--- a/arch/arm/plat-samsung/dev-hsmmc1.c
+++ b/arch/arm/plat-samsung/dev-hsmmc1.c
@@ -61,6 +61,8 @@ void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
+ if (pd->wp_gpio)
+ set->wp_gpio = pd->wp_gpio;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c
index 824580b..b724800 100644
--- a/arch/arm/plat-samsung/dev-hsmmc2.c
+++ b/arch/arm/plat-samsung/dev-hsmmc2.c
@@ -62,6 +62,8 @@ void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
+ if (pd->wp_gpio)
+ set->wp_gpio = pd->wp_gpio;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c
index 57bd394..e9b23dc 100644
--- a/arch/arm/plat-samsung/dev-hsmmc3.c
+++ b/arch/arm/plat-samsung/dev-hsmmc3.c
@@ -65,6 +65,8 @@ void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd)
set->max_width = pd->max_width;
+ if (pd->wp_gpio)
+ set->wp_gpio = pd->wp_gpio;
if (pd->cfg_gpio)
set->cfg_gpio = pd->cfg_gpio;
if (pd->cfg_card)
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 1314ffa..3491e18 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -24,6 +24,7 @@ struct mmc_ios;
* struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI
* @max_width: The maximum number of data bits supported.
* @host_caps: Standard MMC host capabilities bit field.
+ * @wp_gpio: The gpio number using for WP.
* @cfg_gpio: Configure the GPIO for a specific card bit-width
* @cfg_card: Configure the interface for a specific card and speed. This
* is necessary the controllers and/or GPIO blocks require the
@@ -37,6 +38,7 @@ struct mmc_ios;
struct s3c_sdhci_platdata {
unsigned int max_width;
unsigned int host_caps;
+ unsigned int wp_gpio;
char **clocks; /* set of clock sources */
--
1.6.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
