Remove the last s3c2410_gpio_pullup() users in arch/arm/mach-s3c2410 Note, since mach-h1940.c is setting output and a pull-up, the call has vbeen chanerd to S3C_GPIO_PULL_NONE instead of S3C_GPIO_PULL_UP. Signed-off-by: Ben Dooks <ben-linux@xxxxxxxxx> --- arch/arm/mach-s3c2410/mach-amlm5900.c | 2 +- arch/arm/mach-s3c2410/mach-h1940.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index b42a760..34fc05a 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -227,7 +227,7 @@ static void amlm5900_init_pm(void) enable_irq_wake(IRQ_EINT9); /* configure the suspend/resume status pin */ s3c_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); - s3c2410_gpio_pullup(S3C2410_GPF(2), 0); + s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_UP); } } static void __init amlm5900_init(void) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index e2f7e64..9531b4c 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -209,7 +209,7 @@ static int h1940_backlight_init(struct device *dev) gpio_request(S3C2410_GPB(0), "Backlight"); gpio_direction_output(S3C2410_GPB(0), 0); - s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + s3c_gpio_setpull(S3C2410_GPB(0), S3C_GPIO_PULL_NONE); s3c_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0); return 0; -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |