On Tue, Mar 09, 2010 at 07:09:57PM +0530, Thomas Abraham wrote:
> This patch adds support for SDHCI interface on SMDK6440 board.
>
> Signed-off-by: Thomas Abraham <thomas.ab@xxxxxxxxxxx>
> ---
> arch/arm/mach-s5p6440/mach-smdk6440.c | 69 +++++++++++++++++++++++++++++++++
> 1 files changed, 69 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5p6440/mach-smdk6440.c b/arch/arm/mach-s5p6440/mach-smdk6440.c
> index 3ae88f2..e039128 100644
> --- a/arch/arm/mach-s5p6440/mach-smdk6440.c
> +++ b/arch/arm/mach-s5p6440/mach-smdk6440.c
> @@ -20,6 +20,7 @@
> #include <linux/io.h>
> #include <linux/module.h>
> #include <linux/clk.h>
> +#include <linux/irq.h>
>
> #include <asm/mach/arch.h>
> #include <asm/mach/map.h>
> @@ -38,6 +39,12 @@
> #include <plat/devs.h>
> #include <plat/cpu.h>
> #include <plat/pll.h>
> +#include <plat/sdhci.h>
> +#include <plat/s5p-clock.h>
> +
> +#include <mach/gpio.h>
> +#include <plat/gpio-core.h>
> +#include <plat/gpio-cfg.h>
>
> #define S5P6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
> S3C2410_UCON_RXILEVEL | \
> @@ -84,6 +91,10 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = {
> };
>
> static struct platform_device *smdk6440_devices[] __initdata = {
> +#ifdef CONFIG_MMC_SDHCI_S3C
> + &s3c_device_hsmmc0,
> + &s3c_device_hsmmc1,
> +#endif
> };
>
> static void __init smdk6440_map_io(void)
> @@ -93,9 +104,67 @@ static void __init smdk6440_map_io(void)
> s3c24xx_init_uarts(smdk6440_uartcfgs, ARRAY_SIZE(smdk6440_uartcfgs));
> }
>
> +#ifdef CONFIG_MMC_SDHCI_S3C
> +static void smdk6440_sdhci0_cfg_ext_cd(void)
> +{
> + s3c_gpio_cfgpin(S5P6440_GPN(8), S3C_GPIO_SFN(2));
> + s3c_gpio_setpull(S5P6440_GPN(8), S3C_GPIO_PULL_NONE);
> + set_irq_type(IRQ_EINT(8), IRQ_TYPE_EDGE_BOTH);
> +}
set_irq_type() is not recommended, please use the relevant flags
to request_irq().
> +static u32 smdk6440_sdhci0_card_detect(void)
> +{
> + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(S5P6440_GPN(8));
> + struct gpio_chip *gc = &chip->chip;
> + u32 present;
> + int offset;
> +
> + offset = S5P6440_GPN(8) - chip->chip.base;
> + present = gc->get(gc, offset);
> + return !present;
> +}
argh, much abuse of the gpio layer here.
gpio_get_value() is what you want here.
> +static void smdk6440_sdhci_setup_clocks(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct clk *parent;
> +
> + parent = clk_get(NULL, "dout_mpll");
> + if (IS_ERR(parent)) {
> + dev_err(dev, "failed to get parent clock of mmc_bus clock\n");
> + return;
> + }
> +
> + if (!s5p_setup_sdhci_sclk(pdev, parent))
> + clk_put(parent);
> +}
> +
> +static void __init smdk6440_sdhci_setup_platdata(void)
> +{
> + struct s3c_sdhci_platdata *pdata;
> +
> + /* SDHCI Slot 0 platform data */
> + /* SMDK6440 uses EINT(8) for SD/MMC card detection for slot 0 */
> + pdata = &s3c_hsmmc0_def_platdata;
> + pdata->cfg_ext_cd = smdk6440_sdhci0_cfg_ext_cd;
> + pdata->is_card_present = smdk6440_sdhci0_card_detect;
> + pdata->ext_cd = S5P_EINT(8);
> + pdata->cfg_clocks = smdk6440_sdhci_setup_clocks;
> + pdata->sclk_mmc_freq = 50 * MHZ;
> +
> + /* SDHCI Slot 1 platform data */
> + pdata = &s3c_hsmmc1_def_platdata;
> + s3c_hsmmc1_def_platdata.cfg_clocks = smdk6440_sdhci_setup_clocks;
> + s3c_hsmmc1_def_platdata.sclk_mmc_freq = 50 * MHZ;
> +}
> +#endif /* CONFIG_MMC_SDHCI_S3C */
> +
> static void __init smdk6440_machine_init(void)
> {
> platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
> +#ifdef CONFIG_MMC_SDHCI_S3C
> + smdk6440_sdhci_setup_platdata();
> +#endif
> }
>
> MACHINE_START(SMDK6440, "SMDK6440")
> --
> 1.6.6.rc2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
