From: Jongpill Lee <boyko.lee@xxxxxxxxxxx> This patch adds suspend-to-ram support for S5PV210. Signed-off-by: Jongpill Lee <boyko.lee@xxxxxxxxxxx> Signed-off-by: Kukjin Kim <kgene.kim@xxxxxxxxxxx> --- arch/arm/mach-s5pv210/Kconfig | 6 + arch/arm/mach-s5pv210/Makefile | 1 + arch/arm/mach-s5pv210/include/mach/pm-core.h | 43 ++++++ arch/arm/mach-s5pv210/include/mach/pm.h | 19 +++ arch/arm/mach-s5pv210/mach-smdkc110.c | 8 ++ arch/arm/mach-s5pv210/mach-smdkv210.c | 8 ++ arch/arm/mach-s5pv210/pm.c | 116 +++++++++++++++++ arch/arm/plat-s5p/Makefile | 4 + arch/arm/plat-s5p/include/plat/pm-s5p.h | 23 +++ arch/arm/plat-s5p/irq-pm.c | 113 +++++++++++++++ arch/arm/plat-s5p/pm.c | 149 +++++++++++++++++++++ arch/arm/plat-s5p/sleep.S | 188 ++++++++++++++++++++++++++ arch/arm/plat-samsung/pm-gpio.c | 4 +- 13 files changed, 680 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-s5pv210/include/mach/pm-core.h create mode 100644 arch/arm/mach-s5pv210/include/mach/pm.h create mode 100644 arch/arm/mach-s5pv210/pm.c create mode 100644 arch/arm/plat-s5p/include/plat/pm-s5p.h create mode 100644 arch/arm/plat-s5p/irq-pm.c create mode 100644 arch/arm/plat-s5p/pm.c create mode 100644 arch/arm/plat-s5p/sleep.S diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index f636113..be0a013 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -12,6 +12,7 @@ if ARCH_S5PV210 config CPU_S5PV210 bool select PLAT_S5P + select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -43,4 +44,9 @@ config MACH_VOGUEV210 endchoice +config S5PV210_PM + bool + help + Power Management code common to S5PV210 + endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index f1772ed..f31d6a4 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -13,6 +13,7 @@ obj- := # Core support for S5PV210 system obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o gpio.o irq-eint-group.o +obj-$(CONFIG_S5PV210_PM) += pm.o # machine support diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h new file mode 100644 index 0000000..52050e4 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pm-core.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/mach-s3c2410/include/mach/pm-core.h, + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@xxxxxxxxxxxx> + * http://armlinux.simtec.co.uk/ + * + * S5PV210 - PM core support for arch/arm/plat-s5p/pm.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +static inline void s3c_pm_debug_init_uart(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_prepare_irqs(void) +{ + __raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK); + __raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK); +} + +static inline void s3c_pm_arch_stop_clocks(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_show_resume_irqs(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_arch_update_uart(void __iomem *regs, + struct pm_uart_save *save) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-s5pv210/include/mach/pm.h b/arch/arm/mach-s5pv210/include/mach/pm.h new file mode 100644 index 0000000..897444b --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/pm.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s5pv210/include/mach/pm.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Headers for Power Management + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PM_H +#define __ASM_ARCH_PM_H __FILE__ + +#include <plat/pm.h> +#include <plat/pm-s5p.h> + +#endif /* __ASM_ARCH_PM_H */ diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c index 9c9829c..7c54ba3 100644 --- a/arch/arm/mach-s5pv210/mach-smdkc110.c +++ b/arch/arm/mach-s5pv210/mach-smdkc110.c @@ -26,6 +26,10 @@ #include <plat/devs.h> #include <plat/cpu.h> +#if defined(CONFIG_PM) +#include <mach/pm.h> +#endif + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -83,6 +83,10 @@ static void __init smdkc110_map_io(void) static void __init smdkc110_machine_init(void) { +#if defined(CONFIG_PM) + s3c_pm_init(); +#endif + platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices)); } diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 9c9829c..7c54ba3 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -26,6 +26,10 @@ #include <plat/devs.h> #include <plat/cpu.h> +#if defined(CONFIG_PM) +#include <mach/pm.h> +#endif + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -83,6 +83,10 @@ static void __init smdkv210_map_io(void) static void __init smdkv210_machine_init(void) { +#if defined(CONFIG_PM) + s3c_pm_init(); +#endif + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c new file mode 100644 index 0000000..b446e87 --- /dev/null +++ b/arch/arm/mach-s5pv210/pm.c @@ -0,0 +1,116 @@ +/* linux/arch/arm/mach-s5pv210/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 - Power Management support + * + * Based on arch/arm/mach-s3c2410/pm.c + * Copyright (c) 2006 Simtec Electronics + * Ben Dooks <ben@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> + +#include <asm/mach-types.h> + +#include <mach/regs-gpio.h> +#include <plat/cpu.h> +#include <mach/pm.h> + +#include <mach/regs-irq.h> +#include <mach/regs-clock.h> + +void s5pv210_cpu_suspend(void) +{ + unsigned long tmp; + + /* issue the standby signal into the pm unit. Note, we + * issue a write-buffer drain just in case */ + + tmp = 0; + + asm("b 1f\n\t" + ".align 5\n\t" + "1:\n\t" + "mcr p15, 0, %0, c7, c10, 5\n\t" + "mcr p15, 0, %0, c7, c10, 4\n\t" + ".word 0xe320f003" : : "r" (tmp)); + + /* we should never get past here */ + panic("sleep resumed to originator?"); +} + +static void s5pv210_pm_prepare(void) +{ + unsigned int tmp; + + /* ensure at least INFORM0 has the resume address */ + __raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0); + + tmp = __raw_readl(S5P_SLEEP_CFG); + tmp &= ~(S5P_SLEEP_CFG_OSC_EN | S5P_SLEEP_CFG_USBOSC_EN); + __raw_writel(tmp, S5P_SLEEP_CFG); + + /* WFI for SLEEP mode configuration by SYSCON */ + tmp = __raw_readl(S5P_PWR_CFG); + tmp &= S5P_CFG_WFI_CLEAN; + tmp |= S5P_CFG_WFI_SLEEP; + __raw_writel(tmp, S5P_PWR_CFG); + + /* SYSCON interrupt handling disable */ + tmp = __raw_readl(S5P_OTHERS); + tmp |= S5P_OTHER_SYSC_INTOFF; + __raw_writel(tmp, S5P_OTHERS); + + __raw_writel(0xffffffff, (VA_VIC0 + VIC_INT_ENABLE_CLEAR)); + __raw_writel(0xffffffff, (VA_VIC1 + VIC_INT_ENABLE_CLEAR)); + __raw_writel(0xffffffff, (VA_VIC2 + VIC_INT_ENABLE_CLEAR)); + __raw_writel(0xffffffff, (VA_VIC3 + VIC_INT_ENABLE_CLEAR)); +} + +static int s5pv210_pm_add(struct sys_device *sysdev) +{ + pm_cpu_prep = s5pv210_pm_prepare; + pm_cpu_sleep = s5pv210_cpu_suspend; + + return 0; +} + +static struct sleep_save s5pv210_sleep[] = { + /* nothing here yet */ +}; + +static int s5pv210_pm_resume(struct sys_device *dev) +{ + u32 tmp; + + tmp = __raw_readl(S5P_OTHERS); + tmp |= (S5P_OTHERS_RET_IO | S5P_OTHERS_RET_MMC | S5P_OTHERS_RET_UART); + __raw_writel(tmp , S5P_OTHERS); + + s3c_pm_do_restore(s5pv210_sleep, ARRAY_SIZE(s5pv210_sleep)); + return 0; +} + +static struct sysdev_driver s5pv210_pm_driver = { + .add = s5pv210_pm_add, + .resume = s5pv210_pm_resume, +}; + +static __init int s5pv210_pm_drvinit(void) +{ + return sysdev_driver_register(&s5pv210_sysclass, &s5pv210_pm_driver); +} +arch_initcall(s5pv210_pm_drvinit); diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 00a7966..ac73bb1 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -19,3 +19,7 @@ obj-y += cpu.o obj-y += clock.o obj-y += irq.o irq-eint.o obj-y += setup-i2c0.o + +obj-$(CONFIG_PM) += pm.o +obj-$(CONFIG_PM) += irq-pm.o +obj-$(CONFIG_PM) += sleep.o diff --git a/arch/arm/plat-s5p/include/plat/pm-s5p.h b/arch/arm/plat-s5p/include/plat/pm-s5p.h new file mode 100644 index 0000000..6bba23f --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/pm-s5p.h @@ -0,0 +1,23 @@ +/* linux/arch/arm/plat-s5p/include/plat/pm-s5p.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P - Definitions for Power Management + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* helper functions to save/restore lists of registers. */ + +#ifdef CONFIG_PM +extern int s3c_irq_wake(unsigned int irqno, unsigned int state); +extern int s5p_irq_suspend(struct sys_device *dev, pm_message_t state); +extern int s5p_irq_resume(struct sys_device *dev); +#else +#define s3c_irq_wake NULL +#define s5p_irq_suspend NULL +#define s5p_irq_resume NULL +#endif diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c new file mode 100644 index 0000000..b6839d1 --- /dev/null +++ b/arch/arm/plat-s5p/irq-pm.c @@ -0,0 +1,113 @@ +/* linux/arch/arm/plat-s5p/irq-pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Based on arch/arm/plat-s3c24xx/irq-pm.c, + * Copyright (c) 2003,2004 Simtec Electronics + * Ben Dooks <ben@xxxxxxxxxxxx> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> + +#include <plat/cpu.h> +#include <plat/irqs.h> +#include <mach/pm.h> +#include <mach/map.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-irq.h> + +/* state for IRQs over sleep */ + +/* default is to allow for EINT0..EINT31, and IRQ_RTC_TIC, IRQ_RTC_ALARM, + * as wakeup sources + * + * set bit to 1 in allow bitfield to enable the wakeup settings on it +*/ + +unsigned long s3c_irqwake_intallow = 0x00000006L; +unsigned long s3c_irqwake_eintallow = 0xffffffffL; + +int s3c_irq_wake(unsigned int irqno, unsigned int state) +{ + unsigned long irqbit; + + switch (irqno) { + case IRQ_RTC_TIC: + case IRQ_RTC_ALARM: + irqbit = 1 << (irqno + 1 - IRQ_RTC_ALARM); + if (!state) + s3c_irqwake_intmask |= irqbit; + else + s3c_irqwake_intmask &= ~irqbit; + break; + default: + return -ENOENT; + } + return 0; +} + +/* this lot should be really saved by the IRQ code */ +/* VICXADDRESSXX initilaization to be needed */ +static struct sleep_save irq_save[] = { + SAVE_ITEM(VA_VIC0 + VIC_INT_SELECT), + SAVE_ITEM(VA_VIC1 + VIC_INT_SELECT), + SAVE_ITEM(VA_VIC2 + VIC_INT_SELECT), + SAVE_ITEM(VA_VIC3 + VIC_INT_SELECT), + + SAVE_ITEM(VA_VIC0 + VIC_INT_ENABLE), + SAVE_ITEM(VA_VIC1 + VIC_INT_ENABLE), + SAVE_ITEM(VA_VIC2 + VIC_INT_ENABLE), + SAVE_ITEM(VA_VIC3 + VIC_INT_ENABLE), + + SAVE_ITEM(VA_VIC0 + VIC_INT_SOFT), + SAVE_ITEM(VA_VIC1 + VIC_INT_SOFT), + SAVE_ITEM(VA_VIC2 + VIC_INT_SOFT), + SAVE_ITEM(VA_VIC3 + VIC_INT_SOFT), +}; + +static struct sleep_save eint_save[] = { + SAVE_ITEM(S5P_EINT30CON), + SAVE_ITEM(S5P_EINT31CON), + SAVE_ITEM(S5P_EINT32CON), + SAVE_ITEM(S5P_EINT33CON), + + SAVE_ITEM(S5P_EINT30FLTCON0), + SAVE_ITEM(S5P_EINT30FLTCON1), + SAVE_ITEM(S5P_EINT31FLTCON0), + SAVE_ITEM(S5P_EINT31FLTCON1), + SAVE_ITEM(S5P_EINT32FLTCON0), + SAVE_ITEM(S5P_EINT32FLTCON1), + SAVE_ITEM(S5P_EINT33FLTCON0), + SAVE_ITEM(S5P_EINT33FLTCON1), + + SAVE_ITEM(S5P_EINT30MASK), + SAVE_ITEM(S5P_EINT31MASK), + SAVE_ITEM(S5P_EINT32MASK), + SAVE_ITEM(S5P_EINT33MASK), +}; + +int s5p_irq_suspend(struct sys_device *dev, pm_message_t state) +{ + s3c_pm_do_save(eint_save, ARRAY_SIZE(eint_save)); + s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save)); + + return 0; +} + +int s5p_irq_resume(struct sys_device *dev) +{ + s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save)); + s3c_pm_do_restore(eint_save, ARRAY_SIZE(eint_save)); + + return 0; +} diff --git a/arch/arm/plat-s5p/pm.c b/arch/arm/plat-s5p/pm.c new file mode 100644 index 0000000..397b60a --- /dev/null +++ b/arch/arm/plat-s5p/pm.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/plat-s5p/pm.c + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P Power Manager (Suspend-To-RAM) support + * + * Based on arch/arm/plat-s3c24xx/pm.c + * Copyright (c) 2004,2006 Simtec Electronics + * Ben Dooks <ben@xxxxxxxxxxxx> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/suspend.h> +#include <linux/errno.h> +#include <linux/time.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/serial_core.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +#include <asm/cacheflush.h> +#include <mach/hardware.h> + +#include <mach/map.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-serial.h> +#include <plat/regs-timer.h> +#include <mach/regs-clock.h> +#include <mach/regs-mem.h> +#include <mach/regs-irq.h> + +#include <asm/mach/time.h> + +#include <mach/pm.h> + +#define PFX "s5p pm: " + +static struct sleep_save core_save[] = { + /* Clock source */ + SAVE_ITEM(S5P_CLK_SRC0), + SAVE_ITEM(S5P_CLK_SRC1), + SAVE_ITEM(S5P_CLK_SRC2), + SAVE_ITEM(S5P_CLK_SRC3), + SAVE_ITEM(S5P_CLK_SRC4), + SAVE_ITEM(S5P_CLK_SRC5), + SAVE_ITEM(S5P_CLK_SRC6), + + /* Clock source Mask */ + SAVE_ITEM(S5P_CLK_SRC_MASK0), + SAVE_ITEM(S5P_CLK_SRC_MASK1), + + /* Clock Divider */ + SAVE_ITEM(S5P_CLK_DIV0), + SAVE_ITEM(S5P_CLK_DIV1), + SAVE_ITEM(S5P_CLK_DIV2), + SAVE_ITEM(S5P_CLK_DIV3), + SAVE_ITEM(S5P_CLK_DIV4), + SAVE_ITEM(S5P_CLK_DIV5), + SAVE_ITEM(S5P_CLK_DIV6), + SAVE_ITEM(S5P_CLK_DIV7), + + /* Clock Main Gate */ + SAVE_ITEM(S5P_CLKGATE_MAIN0), + SAVE_ITEM(S5P_CLKGATE_MAIN1), + SAVE_ITEM(S5P_CLKGATE_MAIN2), + + /* Clock source Peri Gate */ + SAVE_ITEM(S5P_CLKGATE_PERI0), + SAVE_ITEM(S5P_CLKGATE_PERI1), + + /* Clock source SCLK Gate */ + SAVE_ITEM(S5P_CLKGATE_SCLK0), + SAVE_ITEM(S5P_CLKGATE_SCLK1), + + /* Clock IP Clock gate */ + SAVE_ITEM(S5P_CLKGATE_IP0), + SAVE_ITEM(S5P_CLKGATE_IP1), + SAVE_ITEM(S5P_CLKGATE_IP2), + SAVE_ITEM(S5P_CLKGATE_IP3), + SAVE_ITEM(S5P_CLKGATE_IP4), + + /* Clock Blcok and Bus gate */ + SAVE_ITEM(S5P_CLKGATE_BLOCK), + SAVE_ITEM(S5P_CLKGATE_BUS0), + + /* Clock ETC */ + SAVE_ITEM(S5P_CLK_OUT), + + /* PWM Register */ + SAVE_ITEM(S3C2410_TCFG0), + SAVE_ITEM(S3C2410_TCFG1), + SAVE_ITEM(S3C64XX_TINT_CSTAT), + SAVE_ITEM(S3C2410_TCON), + SAVE_ITEM(S3C2410_TCNTB(0)), + SAVE_ITEM(S3C2410_TCMPB(0)), + SAVE_ITEM(S3C2410_TCNTO(0)), +}; + +static struct sleep_save sromc_save[] = { + SAVE_ITEM(S5P_SROM_BW), + SAVE_ITEM(S5P_SROM_BC0), + SAVE_ITEM(S5P_SROM_BC1), + SAVE_ITEM(S5P_SROM_BC2), + SAVE_ITEM(S5P_SROM_BC3), + SAVE_ITEM(S5P_SROM_BC4), + SAVE_ITEM(S5P_SROM_BC5), +}; + +/* s3c_pm_check_resume_pin + * + * check to see if the pin is configured correctly for sleep mode, and + * make any necessary adjustments if it is not +*/ + +static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs) +{ + /* nothing here yet */ +} + +/* s3c_pm_configure_extint + * + * configure all external interrupt pins +*/ + +void s3c_pm_configure_extint(void) +{ + /* nothing here yet */ +} + +void s3c_pm_restore_core(void) +{ + s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save)); + s3c_pm_do_restore(sromc_save, ARRAY_SIZE(sromc_save)); +} + +void s3c_pm_save_core(void) +{ + s3c_pm_do_save(sromc_save, ARRAY_SIZE(sromc_save)); + s3c_pm_do_save(core_save, ARRAY_SIZE(core_save)); +} diff --git a/arch/arm/plat-s5p/sleep.S b/arch/arm/plat-s5p/sleep.S new file mode 100644 index 0000000..ca9f08e --- /dev/null +++ b/arch/arm/plat-s5p/sleep.S @@ -0,0 +1,188 @@ +/* linux/arch/arm/plat-s5p/sleep.S + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5PV210 power Manager (Suspend-To-RAM) support + * Based on S3C2410 sleep code by: + * Ben Dooks, (c) 2004 Simtec Electronics + * + * Based on PXA/SA1100 sleep code by: + * Nicolas Pitre, (c) 2002 Monta Vista Software Inc + * Cliff Brake, (c) 2001 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/linkage.h> +#include <asm/assembler.h> +#include <mach/hardware.h> +#include <mach/map.h> +#include <asm/asm-offsets.h> +#include <asm/memory.h> +#include <asm/system.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> +#include <mach/regs-mem.h> +#include <plat/regs-serial.h> + +/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not + * reset the UART configuration, only enable if you really need this! +*/ + .text + + /* s3c_cpu_save + * + * entry: + * r0 = save address (virtual addr of s3c_sleep_save_phys) + */ + +ENTRY(s3c_cpu_save) + + stmfd sp!, { r3 - r12, lr } + + mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID + mrc p15, 0, r5, c3, c0, 0 @ Domain ID + mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control + mrc p15, 0, r9, c1, c0, 0 @ Control register + mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mrc p15, 0, r12, c10, c2, 0 @ Read PRRR + mrc p15, 0, r3, c10, c2, 1 @ READ NMRR + + stmia r0, { r3 - r13 } + + @@ write our state back to RAM + bl s3c_pm_cb_flushcache + + @@ jump to final code to send system to sleep + ldr r0, =pm_cpu_sleep + @@ldr pc, [ r0 ] + ldr r0, [ r0 ] + mov pc, r0 + + @@ return to the caller, after having the MMU + @@ turned on, this restores the last bits from the + @@ stack +resume_with_mmu: + /* delete added mmu table list */ + ldr r9 , =(PAGE_OFFSET - PHYS_OFFSET) + add r4, r4, r9 + str r12, [r4] + + ldmfd sp!, { r3 - r12, pc } + + .ltorg + + @@ the next bits sit in the .data segment, even though they + @@ happen to be code... the s5pv210_sleep_save_phys needs to be + @@ accessed by the resume code before it can restore the MMU. + @@ This means that the variable has to be close enough for the + @@ code to read it... since the .text segment needs to be RO, + @@ the data segment can be the only place to put this code. + + .data + + .global s3c_sleep_save_phys +s3c_sleep_save_phys: + .word 0 + + + /* sleep magic, to allow the bootloader to check for an valid + * image to resume to. Must be the first word before the + * s5pv210_cpu_resume entry. + */ + + .word 0x2bedf00d + + /* s3c_cpu_resume + * + * resume code entry for bootloader to call + * + * we must put this code here in the data segment as we have no + * other way of restoring the stack pointer after sleep, and we + * must not write to the code segment (code is read-only) + */ + +ENTRY(s3c_cpu_resume) + mov r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE + msr cpsr_c, r0 + + @@ load UART to allow us to print the two characters for + @@ resume debug + + mov r1, #0 + mcr p15, 0, r1, c8, c7, 0 @@ invalidate TLBs + mcr p15, 0, r1, c7, c5, 0 @@ invalidate I Cache + + ldr r0, s3c_sleep_save_phys @ address of restore block + ldmia r0, { r3 - r13 } + + mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID + mcr p15, 0, r5, c3, c0, 0 @ Domain ID + + mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control + mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1 + mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0 + + mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + + mov r0, #0 + mcr p15, 0, r0, c8, c7, 0 @ Invalidate I & D TLB + + mov r0, #0 @ restore copro access controls + mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls + mcr p15, 0, r0, c7, c5, 4 + + mcr p15, 0, r12, c10, c2, 0 @ write PRRR + mcr p15, 0, r3, c10, c2, 1 @ write NMRR + + /* calculate first section address into r8 */ + mov r4, r6 + ldr r5, =0x3fff + bic r4, r4, r5 + ldr r11, =0xe010f000 + ldr r10, [r11, #0] + mov r10, r10 ,LSR #18 + bic r10, r10, #0x3 + orr r4, r4, r10 + + /* calculate mmu list value into r9 */ + mov r10, r10, LSL #18 + ldr r5, =0x40e + orr r10, r10, r5 + + /* back up originally data */ + + ldr r12, [r4] + + /* Added list about mmu */ + str r10, [r4] + + ldr r2, =resume_with_mmu + mcr p15, 0, r9, c1, c0, 0 @ turn on MMU, etc + + nop + nop + nop + nop + nop @ second-to-last before mmu + + mov pc, r2 @ go back to virtual address + + .ltorg diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 69a4c7f..88ab73c 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -192,7 +192,7 @@ struct s3c_gpio_pm s3c_gpio_pm_2bit = { .resume = s3c_gpio_pm_2bit_resume, }; -#ifdef CONFIG_ARCH_S3C64XX +#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); @@ -302,7 +302,7 @@ struct s3c_gpio_pm s3c_gpio_pm_4bit = { .save = s3c_gpio_pm_4bit_save, .resume = s3c_gpio_pm_4bit_resume, }; -#endif /* CONFIG_ARCH_S3C64XX */ +#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** * s3c_pm_save_gpio() - save gpio chip data for suspend -- 1.6.2.5 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |