Re: [PATCH 4/4] ARM: S3C64XX: Add s3c64xx support to touchscreen driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Op 25-01-10 10:46, Arnaud Patard (Rtp) schreef:
Maurus Cuelenaere<mcuelenaere@xxxxxxxxx>  writes:

Hi,

ARM: S3C64XX: Add s3c64xx support to touchscreen driver

This ack's the extra interrupt s3c64xx platforms have in the touchscreen driver.

Signed-off-by: Maurus Cuelenaere<mcuelenaere@xxxxxxxxx>
---
  drivers/input/touchscreen/Kconfig      |    6 +++---
  drivers/input/touchscreen/s3c2410_ts.c |   28 ++++++++++++++++++++++++----
  2 files changed, 27 insertions(+), 7 deletions(-)

diff --git a/drivers/input/touchscreen/Kconfig
b/drivers/input/touchscreen/Kconfig
index dfafc76..0378b3d 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -146,11 +146,11 @@ config TOUCHSCREEN_FUJITSU
  	  module will be called fujitsu-ts.

  config TOUCHSCREEN_S3C2410
-	tristate "Samsung S3C2410 touchscreen input driver"
-	depends on ARCH_S3C2410
+	tristate "Samsung S3C touchscreen input driver"
+	depends on ARCH_S3C2410 || ARCH_S3C64XX
  	select S3C24XX_ADC
  	help
-	  Say Y here if you have the s3c2410 touchscreen.
+	  Say Y here if you have the s3c touchscreen.

  	  If unsure, say N.

diff --git a/drivers/input/touchscreen/s3c2410_ts.c
b/drivers/input/touchscreen/s3c2410_ts.c
index 3debbc2..7dfbc38 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -40,7 +40,9 @@
  #include<plat/regs-adc.h>
  #include<plat/ts.h>

+#ifdef PLAT_S3C24XX
  #include<mach/regs-gpio.h>
+#endif

  #define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))

@@ -88,6 +90,12 @@ struct s3c2410ts {

  static struct s3c2410ts ts;

+enum s3c_cpu_type {
+	TYPE_S3C2410,
+	TYPE_S3C2440,
+	TYPE_S3C64XX,
+};
+
  /**
   * s3c2410_ts_connect - configure gpio for s3c2410 systems
   *
@@ -95,6 +103,7 @@ static struct s3c2410ts ts;
   * connected to the device (later systems such as the S3C2440 integrate
   * these into the device).
  */
+#ifdef PLAT_S3C24XX
  static inline void s3c2410_ts_connect(void)
  {
  	s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
@@ -102,6 +111,7 @@ static inline void s3c2410_ts_connect(void)
  	s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
  	s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
  }
+#endif
Please, remove all theses #ifdef. I don't see the point of them as it's
only few lines of C code and they don't get executed when running on
other platforms than 2410.

Arnaud

The problem is that s3c2410_gpio_cfgpin() and S3C2410_* isn't defined on S3C64XX builds so this gives implicit declaration errors.

Regards,
Maurus Cuelenaere
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux