[PATCH v2 2/3] s390/pci: store DMA offset in bus_dma_region

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



PCI devices on s390 have a DMA offset that is reported via CLP.  In
preparation for allowing identity domains, setup the bus_dma_region
for all PCI devices using the reported CLP value.

Signed-off-by: Matthew Rosato <mjrosato@xxxxxxxxxxxxx>
---
 arch/s390/pci/pci_bus.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/s390/pci/pci_bus.c b/arch/s390/pci/pci_bus.c
index d5ace00d10f0..14527687d0f2 100644
--- a/arch/s390/pci/pci_bus.c
+++ b/arch/s390/pci/pci_bus.c
@@ -19,6 +19,7 @@
 #include <linux/jump_label.h>
 #include <linux/pci.h>
 #include <linux/printk.h>
+#include <linux/dma-direct.h>
 
 #include <asm/pci_clp.h>
 #include <asm/pci_dma.h>
@@ -284,10 +285,27 @@ static struct zpci_bus *zpci_bus_alloc(int topo, bool topo_is_tid)
 	return zbus;
 }
 
+static void pci_dma_range_setup(struct pci_dev *pdev)
+{
+	struct zpci_dev *zdev = to_zpci(pdev);
+	struct bus_dma_region *map;
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return;
+
+	map->cpu_start = 0;
+	map->dma_start = PAGE_ALIGN(zdev->start_dma);
+	map->size = (u64)virt_to_phys(high_memory);
+	pdev->dev.dma_range_map = map;
+}
+
 void pcibios_bus_add_device(struct pci_dev *pdev)
 {
 	struct zpci_dev *zdev = to_zpci(pdev);
 
+	pci_dma_range_setup(pdev);
+
 	/*
 	 * With pdev->no_vf_scan the common PCI probing code does not
 	 * perform PF/VF linking.
-- 
2.47.1





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux