On Fri, 2 Aug 2024 09:03:47 +0300
Baruch Siach <baruch@xxxxxxxxxx> wrote:
> From: Catalin Marinas <catalin.marinas@xxxxxxx>
>
> Hardware DMA limit might not be power of 2. When RAM range starts above
> 0, say 4GB, DMA limit of 30 bits should end at 5GB. A single high bit
> can not encode this limit.
>
> Use plain address for DMA zone limit.
>
> Since DMA zone can now potentially span beyond 4GB physical limit of
> DMA32, make sure to use DMA zone for GFP_DMA32 allocations in that case.
>
> Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>
> Co-developed-by: Baruch Siach <baruch@xxxxxxxxxx>
> Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx>
> ---
> arch/arm64/mm/init.c | 30 +++++++++++++++---------------
> arch/powerpc/mm/mem.c | 9 ++++-----
> arch/s390/mm/init.c | 2 +-
> include/linux/dma-direct.h | 2 +-
> kernel/dma/direct.c | 4 ++--
> kernel/dma/pool.c | 4 ++--
> kernel/dma/swiotlb.c | 4 ++--
> 7 files changed, 27 insertions(+), 28 deletions(-)
>
> diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
> index 9b5ab6818f7f..c45e2152ca9e 100644
> --- a/arch/arm64/mm/init.c
> +++ b/arch/arm64/mm/init.c
> @@ -115,35 +115,35 @@ static void __init arch_reserve_crashkernel(void)
> }
>
> /*
> - * Return the maximum physical address for a zone accessible by the given bits
> - * limit. If DRAM starts above 32-bit, expand the zone to the maximum
> + * Return the maximum physical address for a zone given its limit.
> + * If DRAM starts above 32-bit, expand the zone to the maximum
> * available memory, otherwise cap it at 32-bit.
> */
> -static phys_addr_t __init max_zone_phys(unsigned int zone_bits)
> +static phys_addr_t __init max_zone_phys(phys_addr_t zone_limit)
> {
> - phys_addr_t zone_mask = DMA_BIT_MASK(zone_bits);
> phys_addr_t phys_start = memblock_start_of_DRAM();
>
> if (phys_start > U32_MAX)
> - zone_mask = PHYS_ADDR_MAX;
> - else if (phys_start > zone_mask)
> - zone_mask = U32_MAX;
> + zone_limit = PHYS_ADDR_MAX;
> + else if (phys_start > zone_limit)
> + zone_limit = U32_MAX;
>
> - return min(zone_mask, memblock_end_of_DRAM() - 1) + 1;
> + return min(zone_limit, memblock_end_of_DRAM() - 1) + 1;
> }
>
> static void __init zone_sizes_init(void)
> {
> unsigned long max_zone_pfns[MAX_NR_ZONES] = {0};
> - unsigned int __maybe_unused acpi_zone_dma_bits;
> - unsigned int __maybe_unused dt_zone_dma_bits;
> - phys_addr_t __maybe_unused dma32_phys_limit = max_zone_phys(32);
> + phys_addr_t __maybe_unused acpi_zone_dma_limit;
> + phys_addr_t __maybe_unused dt_zone_dma_limit;
> + phys_addr_t __maybe_unused dma32_phys_limit =
> + max_zone_phys(DMA_BIT_MASK(32));
>
> #ifdef CONFIG_ZONE_DMA
> - acpi_zone_dma_bits = fls64(acpi_iort_dma_get_max_cpu_address());
> - dt_zone_dma_bits = fls64(of_dma_get_max_cpu_address(NULL));
> - zone_dma_bits = min3(32U, dt_zone_dma_bits, acpi_zone_dma_bits);
> - arm64_dma_phys_limit = max_zone_phys(zone_dma_bits);
> + acpi_zone_dma_limit = acpi_iort_dma_get_max_cpu_address();
> + dt_zone_dma_limit = of_dma_get_max_cpu_address(NULL);
> + zone_dma_limit = min(dt_zone_dma_limit, acpi_zone_dma_limit);
> + arm64_dma_phys_limit = max_zone_phys(zone_dma_limit);
> max_zone_pfns[ZONE_DMA] = PFN_DOWN(arm64_dma_phys_limit);
> #endif
> #ifdef CONFIG_ZONE_DMA32
> diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
> index d325217ab201..342c006cc1b8 100644
> --- a/arch/powerpc/mm/mem.c
> +++ b/arch/powerpc/mm/mem.c
> @@ -216,7 +216,7 @@ static int __init mark_nonram_nosave(void)
> * everything else. GFP_DMA32 page allocations automatically fall back to
> * ZONE_DMA.
> *
> - * By using 31-bit unconditionally, we can exploit zone_dma_bits to inform the
> + * By using 31-bit unconditionally, we can exploit zone_dma_limit to inform the
> * generic DMA mapping code. 32-bit only devices (if not handled by an IOMMU
> * anyway) will take a first dip into ZONE_NORMAL and get otherwise served by
> * ZONE_DMA.
> @@ -252,13 +252,12 @@ void __init paging_init(void)
> * powerbooks.
> */
> if (IS_ENABLED(CONFIG_PPC32))
> - zone_dma_bits = 30;
> + zone_dma_limit = DMA_BIT_MASK(30);
> else
> - zone_dma_bits = 31;
> + zone_dma_limit = DMA_BIT_MASK(31);
>
> #ifdef CONFIG_ZONE_DMA
> - max_zone_pfns[ZONE_DMA] = min(max_low_pfn,
> - 1UL << (zone_dma_bits - PAGE_SHIFT));
> + max_zone_pfns[ZONE_DMA] = min(max_low_pfn, zone_dma_limit >> PAGE_SHIFT);
No big deal, but this is off by one. DMA_BIT_MASK() returns the highest
address that can be represented with the given number of bits, whereas
max_zone_pfns[] contains the lowest PFN that is NOT contained in the
zone.
Rest of the patch looks perfect.
Petr T
