[kvm-unit-tests PATCH 3/4] s390x: Move SIE assembly into new file

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In contrast to the other functions in cpu.S it's quite lengthy so
let's split it off.

Signed-off-by: Janosch Frank <frankja@xxxxxxxxxxxxx>
---
 s390x/Makefile             |  2 +-
 s390x/{cpu.S => cpu-sie.S} | 59 +----------------------------------
 s390x/cpu.S                | 64 --------------------------------------
 3 files changed, 2 insertions(+), 123 deletions(-)
 copy s390x/{cpu.S => cpu-sie.S} (56%)

diff --git a/s390x/Makefile b/s390x/Makefile
index 457b8455..ecf0bc7e 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -119,7 +119,7 @@ cflatobjs += lib/s390x/fault.o
 
 OBJDIRS += lib/s390x
 
-asmlib = $(TEST_DIR)/cstart64.o $(TEST_DIR)/cpu.o
+asmlib = $(TEST_DIR)/cstart64.o $(TEST_DIR)/cpu.o $(TEST_DIR)/cpu-sie.o
 
 FLATLIBS = $(libcflat)
 
diff --git a/s390x/cpu.S b/s390x/cpu-sie.S
similarity index 56%
copy from s390x/cpu.S
copy to s390x/cpu-sie.S
index 9155b044..9370b5c0 100644
--- a/s390x/cpu.S
+++ b/s390x/cpu-sie.S
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * s390x assembly library
+ * s390x SIE assembly library
  *
  * Copyright (c) 2019 IBM Corp.
  *
@@ -8,59 +8,6 @@
  *    Janosch Frank <frankja@xxxxxxxxxxxxx>
  */
 #include <asm/asm-offsets.h>
-#include <asm/sigp.h>
-
-#include "macros.S"
-
-/*
- * load_reset calling convention:
- * %r2 subcode (0 or 1)
- */
-.globl diag308_load_reset
-diag308_load_reset:
-	SAVE_REGS_STACK
-	/* Backup current PSW mask, as we have to restore it on success */
-	epsw	%r0, %r1
-	st	%r0, GEN_LC_SW_INT_PSW
-	st	%r1, GEN_LC_SW_INT_PSW + 4
-	/* Load reset psw mask (short psw, 64 bit) */
-	lg	%r0, reset_psw
-	/* Load the success label address */
-	larl    %r1, 0f
-	/* Or it to the mask */
-	ogr	%r0, %r1
-	/* Store it at the reset PSW location (real 0x0) */
-	stg	%r0, 0
-	stg     %r15, GEN_LC_SW_INT_GRS + 15 * 8
-	/* Do the reset */
-	diag    %r0,%r2,0x308
-	/* Failure path */
-	xgr	%r2, %r2
-	br	%r14
-	/* Success path */
-	/* load a cr0 that has the AFP control bit which enables all FPRs */
-0:	larl	%r1, initial_cr0
-	lctlg	%c0, %c0, 0(%r1)
-	lg      %r15, GEN_LC_SW_INT_GRS + 15 * 8
-	RESTORE_REGS_STACK
-	lhi	%r2, 1
-	larl	%r0, 1f
-	stg	%r0, GEN_LC_SW_INT_PSW + 8
-	lpswe	GEN_LC_SW_INT_PSW
-1:	br	%r14
-
-/* Sets up general registers and cr0 when a new cpu is brought online. */
-.globl smp_cpu_setup_state
-smp_cpu_setup_state:
-	xgr	%r1, %r1
-	lmg     %r0, %r15, GEN_LC_SW_INT_GRS
-	lctlg   %c0, %c0, GEN_LC_SW_INT_CRS
-	/* We should only go once through cpu setup and not for every restart */
-	stg	%r14, GEN_LC_RESTART_NEW_PSW + 8
-	larl	%r14, 0f
-	lpswe	GEN_LC_SW_INT_PSW
-	/* If the function returns, just loop here */
-0:	j	0
 
 /*
  * sie64a calling convention:
@@ -125,7 +72,3 @@ sie_exit:
 .globl sie_exit_gregs
 sie_exit_gregs:
 	br	%r14
-
-	.align	8
-reset_psw:
-	.quad	0x0008000180000000
diff --git a/s390x/cpu.S b/s390x/cpu.S
index 9155b044..2ff4b8e1 100644
--- a/s390x/cpu.S
+++ b/s390x/cpu.S
@@ -62,70 +62,6 @@ smp_cpu_setup_state:
 	/* If the function returns, just loop here */
 0:	j	0
 
-/*
- * sie64a calling convention:
- * %r2 pointer to sie control block
- * %r3 guest register save area
- */
-.globl sie64a
-sie64a:
-	# Save host grs, fprs, fpc
-	stmg	%r0,%r14,SIE_SAVEAREA_HOST_GRS(%r3)	# save kernel registers
-	.irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	std	\i, \i * 8  + SIE_SAVEAREA_HOST_FPRS(%r3)
-	.endr
-	stfpc	SIE_SAVEAREA_HOST_FPC(%r3)
-
-	stctg	%c1, %c1, SIE_SAVEAREA_HOST_ASCE(%r3)
-	lctlg	%c1, %c1, SIE_SAVEAREA_GUEST_ASCE(%r3)
-
-	# Store scb and save_area pointer into stack frame
-	stg	%r2,__SF_SIE_CONTROL(%r15)	# save control block pointer
-	stg	%r3,__SF_SIE_SAVEAREA(%r15)	# save guest register save area
-.globl sie_entry_gregs
-sie_entry_gregs:
-	# Load guest's gprs, fprs and fpc
-	.irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	ld	\i, \i * 8 + SIE_SAVEAREA_GUEST_FPRS(%r3)
-	.endr
-	lfpc	SIE_SAVEAREA_GUEST_FPC(%r3)
-	lmg	%r0,%r13,SIE_SAVEAREA_GUEST_GRS(%r3)
-
-	# Move scb ptr into r14 for the sie instruction
-	lg	%r14,__SF_SIE_CONTROL(%r15)
-
-.globl sie_entry
-sie_entry:
-	sie	0(%r14)
-	nopr	7
-	nopr	7
-	nopr	7
-
-.globl sie_exit
-sie_exit:
-	# Load guest register save area
-	lg	%r14,__SF_SIE_SAVEAREA(%r15)
-
-	# Restore the host asce
-	lctlg	%c1, %c1, SIE_SAVEAREA_HOST_ASCE(%r14)
-
-	# Store guest's gprs, fprs and fpc
-	stmg	%r0,%r13,SIE_SAVEAREA_GUEST_GRS(%r14)	# save guest gprs 0-13
-	.irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	std	\i, \i * 8  + SIE_SAVEAREA_GUEST_FPRS(%r14)
-	.endr
-	stfpc	SIE_SAVEAREA_GUEST_FPC(%r14)
-
-	# Restore host's gprs, fprs and fpc
-	.irp i, 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	ld	\i, \i * 8 + SIE_SAVEAREA_HOST_FPRS(%r14)
-	.endr
-	lfpc	SIE_SAVEAREA_HOST_FPC(%r14)
-	lmg	%r0,%r14,SIE_SAVEAREA_HOST_GRS(%r14)	# restore kernel registers
-.globl sie_exit_gregs
-sie_exit_gregs:
-	br	%r14
-
 	.align	8
 reset_psw:
 	.quad	0x0008000180000000
-- 
2.43.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux