[PATCH v2 3/6] s390/vfio-ap: let 'on_scan_complete' callback filter matrix and update guest's APCB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When adapters and/or domains are added to the host's AP configuration, this
may result in multiple queue devices getting created and probed by the
vfio_ap device driver. For each queue device probed, the matrix of adapters
and domains assigned to a matrix mdev will be filtered to update the
guest's APCB. If any adapters or domains get added to or removed from the
APCB, the guest's AP configuration will be dynamically updated (i.e., hot
plug/unplug). To dynamically update the guest's configuration, its VCPUs
must be taken out of SIE for the period of time it takes to make the
update. This is disruptive to the guest's operation and if there are many
queues probed due to a change in the host's AP configuration, this could be
troublesome. The problem is exacerbated by the fact that the
'on_scan_complete' callback also filters the mdev's matrix and updates
the guest's AP configuration.

In order to reduce the potential amount of disruption to the guest that may
result from a change to the host's AP configuration, let's bypass the
filtering of the matrix and updating of the guest's AP configuration in the
probe callback - if due to a host config change - and defer it until the
'on_scan_complete' callback is invoked after the AP bus finishes its device
scan operation. This way the filtering and updating will be performed only
once regardless of the number of queues added.

Signed-off-by: Tony Krowiak <akrowiak@xxxxxxxxxxxxx>
Reviewed-by: Halil Pasic <pasic@xxxxxxxxxxxxx>
---
 drivers/s390/crypto/vfio_ap_ops.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 47232e19a50e..26bd4aca497a 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -2083,9 +2083,22 @@ int vfio_ap_mdev_probe_queue(struct ap_device *apdev)
 	if (matrix_mdev) {
 		vfio_ap_mdev_link_queue(matrix_mdev, q);
 
+		/*
+		 * If we're in the process of handling the adding of adapters or
+		 * domains to the host's AP configuration, then let the
+		 * vfio_ap device driver's on_scan_complete callback filter the
+		 * matrix and update the guest's AP configuration after all of
+		 * the new queue devices are probed.
+		 */
+		if (!bitmap_empty(matrix_mdev->apm_add, AP_DEVICES) ||
+		    !bitmap_empty(matrix_mdev->aqm_add, AP_DOMAINS))
+			goto done;
+
 		if (vfio_ap_mdev_filter_matrix(matrix_mdev))
 			vfio_ap_mdev_update_guest_apcb(matrix_mdev);
 	}
+
+done:
 	dev_set_drvdata(&apdev->device, q);
 	release_update_locks_for_mdev(matrix_mdev);
 
-- 
2.43.0





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux