Re: [PATCH v6 02/14] x86/kexec: refactor for kernel/Kconfig.kexec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 2023/7/13 0:15, Eric DeVolder wrote:
> The kexec and crash kernel options are provided in the common
> kernel/Kconfig.kexec. Utilize the common options and provide
> the ARCH_SUPPORTS_ and ARCH_SELECTS_ entries to recreate the
> equivalent set of KEXEC and CRASH options.
> 
> Signed-off-by: Eric DeVolder <eric.devolder@xxxxxxxxxx>
> ---
>  arch/x86/Kconfig | 92 ++++++++++--------------------------------------
>  1 file changed, 19 insertions(+), 73 deletions(-)
> 
> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
> index 7422db409770..9767a343f7c2 100644
> --- a/arch/x86/Kconfig
> +++ b/arch/x86/Kconfig
> @@ -2040,88 +2040,34 @@ config EFI_RUNTIME_MAP
>  
>  source "kernel/Kconfig.hz"
>  
> -config KEXEC
> -	bool "kexec system call"
> -	select KEXEC_CORE
> -	help
> -	  kexec is a system call that implements the ability to shutdown your
> -	  current kernel, and to start another kernel.  It is like a reboot
> -	  but it is independent of the system firmware.   And like a reboot
> -	  you can start any kernel with it, not just Linux.
> -
> -	  The name comes from the similarity to the exec system call.
> -
> -	  It is an ongoing process to be certain the hardware in a machine
> -	  is properly shutdown, so do not be surprised if this code does not
> -	  initially work for you.  As of this writing the exact hardware
> -	  interface is strongly in flux, so no good recommendation can be
> -	  made.
> -
> -config KEXEC_FILE
> -	bool "kexec file based system call"
> -	select KEXEC_CORE
> -	select HAVE_IMA_KEXEC if IMA
> -	depends on X86_64
> -	depends on CRYPTO=y
> -	depends on CRYPTO_SHA256=y
> -	help
> -	  This is new version of kexec system call. This system call is
> -	  file based and takes file descriptors as system call argument
> -	  for kernel and initramfs as opposed to list of segments as
> -	  accepted by previous system call.
> +config ARCH_SUPPORTS_KEXEC
> +	def_bool y

In v5, Joel Fernandes seems to suggest you change it to the following form:
In arch/Kconfig:
+config ARCH_SUPPORTS_KEXEC
+	bool

In arch/x86/Kconfig:
config X86
	... ...
+	select ARCH_SUPPORTS_KEXEC

In arch/arm64/Kconfig:
config ARM64
	... ...
+	select ARCH_SUPPORTS_KEXEC if PM_SLEEP_SMP

etc..

You can refer to ARCH_HAS_DEBUG_VIRTUAL.

>  
> -config ARCH_HAS_KEXEC_PURGATORY
> -	def_bool KEXEC_FILE
> +config ARCH_SUPPORTS_KEXEC_FILE
> +	def_bool X86_64 && CRYPTO && CRYPTO_SHA256
>  
> -config KEXEC_SIG
> -	bool "Verify kernel signature during kexec_file_load() syscall"
> +config ARCH_SELECTS_KEXEC_FILE
> +	def_bool y
>  	depends on KEXEC_FILE
> -	help
> +	select HAVE_IMA_KEXEC if IMA
>  
> -	  This option makes the kexec_file_load() syscall check for a valid
> -	  signature of the kernel image.  The image can still be loaded without
> -	  a valid signature unless you also enable KEXEC_SIG_FORCE, though if
> -	  there's a signature that we can check, then it must be valid.
> +config ARCH_HAS_KEXEC_PURGATORY
> +	def_bool KEXEC_FILE
>  
> -	  In addition to this option, you need to enable signature
> -	  verification for the corresponding kernel image type being
> -	  loaded in order for this to work.
> +config ARCH_SUPPORTS_KEXEC_SIG
> +	def_bool y
>  
> -config KEXEC_SIG_FORCE
> -	bool "Require a valid signature in kexec_file_load() syscall"
> -	depends on KEXEC_SIG
> -	help
> -	  This option makes kernel signature verification mandatory for
> -	  the kexec_file_load() syscall.
> +config ARCH_SUPPORTS_KEXEC_SIG_FORCE
> +	def_bool y
>  
> -config KEXEC_BZIMAGE_VERIFY_SIG
> -	bool "Enable bzImage signature verification support"
> -	depends on KEXEC_SIG
> -	depends on SIGNED_PE_FILE_VERIFICATION
> -	select SYSTEM_TRUSTED_KEYRING
> -	help
> -	  Enable bzImage signature verification support.
> +config ARCH_SUPPORTS_KEXEC_BZIMAGE_VERIFY_SIG
> +	def_bool y
>  
> -config CRASH_DUMP
> -	bool "kernel crash dumps"
> -	depends on X86_64 || (X86_32 && HIGHMEM)
> -	help
> -	  Generate crash dump after being started by kexec.
> -	  This should be normally only set in special crash dump kernels
> -	  which are loaded in the main kernel with kexec-tools into
> -	  a specially reserved region and then later executed after
> -	  a crash by kdump/kexec. The crash dump kernel must be compiled
> -	  to a memory address not used by the main kernel or BIOS using
> -	  PHYSICAL_START, or it must be built as a relocatable image
> -	  (CONFIG_RELOCATABLE=y).
> -	  For more details see Documentation/admin-guide/kdump/kdump.rst
> +config ARCH_SUPPORTS_KEXEC_JUMP
> +	def_bool y
>  
> -config KEXEC_JUMP
> -	bool "kexec jump"
> -	depends on KEXEC && HIBERNATION
> -	help
> -	  Jump between original kernel and kexeced kernel and invoke
> -	  code in physical address mode via KEXEC
> +config ARCH_SUPPORTS_CRASH_DUMP
> +	def_bool X86_64 || (X86_32 && HIGHMEM)
>  
>  config PHYSICAL_START
>  	hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
> 

-- 
Regards,
  Zhen Lei



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [Kernel Development]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Info]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Linux Media]     [Device Mapper]

  Powered by Linux